论文信息 - Tensile Stress-Strain Curves Modeling of Four Kinds of Solders with Temperature and Rate Dependence

Tensile Stress-Strain Curves Modeling of Four Kinds of Solders with Temperature and Rate Dependence

A series of tensile tests at constant strain rate were conducted on tin-lead based solders with different Sn content under wide ranges of temperatures and strain rates. It was shown that the stress-strain relationships had strong temperature- and strain rate- dependence. The parameters of Anand model for four solders were determined. The four solders were 60Sn-40Pb, 40Sn-60Pb, 10Sn-90Pb and 5Sn-95Pb. Anand constitutive model was employed to simulate the stress-strain behaviors of the solders for the temperature range from 313K to 398K and the strain rate range from 0.001%sP -1 P to 2%sP -1 P. The results showed that Anand model can adequately predict the rate- and temperature- related constitutive behaviors at all test temperatures and strain rates.

[1] S. V. Harren,et al. On the Constitutive Response of 63/37 Sn/Pb Eutectic Solder , 1996 .

[2] L. Anand. Constitutive Equations for the Rate-Dependent Deformation of Metals at Elevated Temperatures , 1982 .

[3] M. Sakane,et al. Temperature and Strain Rate Effects on Tensile Strength and Inelastic Constitutive Relationship of Sn-Pb Solders , 2003 .

[4] E. Busso,et al. A Visco-Plastic Constitutive Model for 60/40 Tin-Lead Solder Used in IC Package Joints , 1992 .

[5] Richard A. Wirtz,et al. Development of a high performance heat Sink Based on screen-fin technology , 2005 .

[6] H. Solomon. The creep and strain rate sensitivity of a high Pb content solder with comparisons to 60Sn/40Pb solder , 1990 .

[7] M. Thoben,et al. Rate dependent constitutive relations based on Anand model for 92.5Pb5Sn2.5Ag solder , 2000 .

[8] L. Anand,et al. An internal variable constitutive model for hot working of metals , 1989 .