Analysis and simulation of an industrial vegetable oil refining process

This work focuses on the performance analysis of an industrial vegetable oil refinery. Using a commercial process simulator, a process model was developed and validated against actual vegetable oil refinery field data. The simulator allowed investigating both energy and safety aspects related to the presence of residual extraction solvent (extraction grade hexane) in the processed crude vegetable oil. The critical nodes for hexane accumulation in the process were evaluated, both considering ordinary operative conditions and undesired process deviations due to increase of the hexane content. In this latter case, the control actions able to restore the normal operation were simulated, in terms of increased utility consumption (e.g., motive steam for ejectors and cooling water) or by modifying and optimizing equipment operating conditions. Finally, the possibility of flammable mixtures formation inside process vent pipes, caused by the entrainment of air due strong vacuum conditions, was also investigated.

[1]  Stepan Akteriana,et al.  Improving the energy efficiency of traditional multi-stage steam-jet-ejector vacuum systems for deodorizing edible oils , 2011 .

[2]  Reimar Schumann,et al.  An approach for integrating process and control simulation into the plant engineering process , 2005 .

[3]  S. Souza,et al.  Solvent extraction of vegetable oils: Numerical and experimental study , 2012 .

[4]  Gavin Towler,et al.  Chapter 4 – Process Simulation , 2013 .

[5]  M. Bockisch,et al.  Fats and Oils Handbook , 1998 .

[6]  Roberta Ceriani,et al.  Validation of a method for simultaneous quantification of total carotenes and tocols in vegetable oils by HPLC , 2011 .

[7]  Vincent Gerbaud,et al.  Modeling and simulation of melting curves and chemical interesterification of binary blends of vegetable oils , 2013 .

[8]  Frank D. Gunstone,et al.  The Lipid handbook , 1994 .

[9]  H. A. Vielmo,et al.  Mathematical modeling of vegetable oil extraction in a counter-current crossed flow horizontal extractor , 2005 .

[10]  Edward Szłyk,et al.  Effect of refining processes on antioxidant capacity, total contents of phenolics and carotenoids in palm oils. , 2011, Food chemistry.

[11]  D. Peng,et al.  A New Two-Constant Equation of State , 1976 .

[12]  Adrian Wills,et al.  Application of barrier function based model predictive control to an edible oil refining process , 2005 .

[13]  M. G. Zabetakis.  Flammability characteristics of combustible gases and vapors , 1964 .

[14]  R. L. Motard,et al.  Steady state chemical process simulation , 1975 .

[15]  Antonio J. A. Meirelles,et al.  Phase equilibrium for the system rice bran , 2004 .

[16]  David Wray,et al.  Teaching theory and practice , 2014 .

[17]  Chorng H. Twu,et al.  A new generalized alpha function for a cubic equation of state Part 1. Peng-Robinson equation , 1995 .

[18]  Rangaswamy Subramanian,et al.  New approaches in deacidification of edible oils : a review , 2005 .

[19]  J. D. Seader,et al.  A generalized framework for computing bifurcation diagrams using process simulation programs , 2001 .

[20]  Johan Wouters,et al.  Models for FFA-removal and changes in phase behavior of cocoa butter by packed column steam refining , 2008 .

[21]  Maria C. Pramparo,et al.  Grape seed oil deacidification by molecular distillation : Analysis of operative variables influence using the response surface methodology , 2007 .

[22]  E O Gerasimenko,et al.  Automated flow pH-method for the determination of total free fatty acids content in edible oils. , 2012, Food chemistry.

[23]  Antonio J. A. Meirelles,et al.  Effect of solvent hydration and temperature in the deacidification process of sunflower oil using ethanol , 2009 .

[24]  Ralf Dohrn,et al.  High-pressure fluid phase equilibria , 2002 .

[25]  Carlos Jiménez,et al.  Isolation of sterols from sunflower oil deodorizer distillate , 2010 .

[26]  Sándor Németh,et al.  Analysis of separation possibilities of multicomponent mixtures , 2011 .

[27]  Rafiqul Gani,et al.  Prediction of vapor pressure and heats of vaporization of edible oil/fat compounds by group contribution , 2013 .

[28]  Fabio Polonara,et al.  A review analyzing the industrial biodiesel production practice starting from vegetable oil refining , 2012 .

[29]  M. Ruiz-Méndez,et al.  Combination of chromatographic techniques for the analysis of complex deodoriser distillates from an edible oil refining process , 2007 .

[30]  Roberta Ceriani,et al.  Simulation of continuous physical refiners for edible oil deacidification , 2006 .

[31]  Frank P. Lees,et al.  Loss Prevention In The Process Industries , 1980 .

[32]  M. Dubé,et al.  Biodiesel production from waste cooking oil: 1. Process design and technological assessment. , 2003, Bioresource technology.

[33]  Esteban A. Brignole,et al.  Application of UNIFAC to vegetable oil-alkane mixtures , 1994 .

[34]  R. Farhoosh,et al.  The effect of commercial refining steps on the rancidity measures of soybean and canola oils , 2009 .

[35]  Antonio J. A. Meirelles,et al.  Liquid–liquid equilibria for systems composed of refined soybean oil, free fatty acids, ethanol, and water at different temperatures , 2010 .

[36]  Wolfgang Marquardt,et al.  Optimal column sequencing for multicomponent mixtures , 2008 .

[37]  Nurhan Turgut Dunford,et al.  Pressurized solvent extraction of wheat germ oil , 2003 .

[38]  Jtf Jos Keurentjes,et al.  The Removal of Fatty Acids from Edible Oil. Removal of the Dispersed Phase of a Water-in-Oil Dispersion by a Hydrophilic Membrane , 1991 .

[39]  Ralf Dohrn,et al.  High-pressure fluid-phase equilibria: Experimental methods and systems investigated (1988–1993) , 1995 .

[40]  Roberta Ceriani,et al.  Predicting vapor–liquid equilibria of fatty systems , 2004 .

[41]  Mustafa Kamal Abd. Aziz,et al.  Process design in degumming and bleaching of palm oil , 2006 .

[42]  Didier Villemin,et al.  Colza oil bleaching through optimized acid activation of bentonite. A comparative study , 2009 .

[43]  Mohammad Zamry Jamaludin,et al.  Industry to Industry By-products Exchange Network towards zero waste in palm oil refining processes , 2011 .

[44]  Allen S. Smith,et al.  Vapor pressure of hexane-soybean oil solutions at high solvent concentrations , 1950 .

[45]  Chin Ping Tan,et al.  The effects of physical refining on the formation of 3-monochloropropane-1,2-diol esters in relation to palm oil minor components. , 2012, Food chemistry.

[46]  Valerio Cozzani,et al.  Supporting the selection of process and plant design options by Inherent Safety KPIs , 2012 .

[47]  Ignacio E. Grossmann,et al.  Systematic Methods of Chemical Process Design , 1997 .

[48]  G C Cavanagh.  Miscella refining [Fats and oils]. , 1976 .

[49]  Daniel A. Crowl,et al.  Application of the flammability diagram for evaluation of fire and explosion hazards of flammable vapors , 1998 .

[50]  Roberta Ceriani,et al.  Steam deacidification of palm oil , 2011 .

[51]  J.F.G. Shaw.  The integration of process simulation and engineering design , 1992 .

[52]  Gabriele Landucci,et al.  Hazard assessment of edible oil refining: Formation of flammable mixtures in storage tanks , 2011 .