Enhanced dry machinability of TC4 titanium alloy by longitudinal-bending hybrid ultrasonic vibration-assisted milling

[1]  M. K. Marichelvam,et al.  Development of Eco-Friendly Cutting Fluid for Machining of AISI 1010 Steel in Automotive Industry , 2022, Sustainability.

[2]  Xibin Wang,et al.  Precision Milling of Integrated Turbine Based on a Non-Contact On-Machine Measurement System , 2022, Nanomanufacturing and Metrology.

[3]  Da Qu,et al.  Surface integrity optimization of high speed dry milling UD-CF/PEEK based on specific cutting energy distribution mechanisms effected by impact and size effect , 2022, Journal of Manufacturing Processes.

[4]  Xikui Wang,et al.  Research on cutting force and surface integrity of TC18 titanium alloy by longitudinal ultrasonic vibration assisted milling , 2021, The International Journal of Advanced Manufacturing Technology.

[5]  Sanan H. Khan,et al.  Failure mechanics analysis of AISI 4340 steel using finite element modeling of the milling process , 2021, The Journal of Strain Analysis for Engineering Design.

[6]  Baoji Ma,et al.  Enhancement of machinability and surface quality of Ti-6Al-4V by longitudinal ultrasonic vibration-assisted milling under dry conditions , 2021, Measurement.

[7]  L. N. L. Lacalle,et al.  In pursuit of sustainable cutting fluid strategy for machining Ti-6Al-4V using life cycle analysis , 2021 .

[8]  I. M. Rizwanul Fattah,et al.  State-of-the-Art and Future Perspectives of Environmentally Friendly Machining Using Biodegradable Cutting Fluids , 2021, Energies.

[9]  Javad Akbari,et al.  Finite element simulation of ultrasonic-assisted machining: a review , 2021, The International Journal of Advanced Manufacturing Technology.

[10]  M. Zaeh,et al.  Modeling of cutting forces in 1-D and 2-D ultrasonic vibration-assisted milling of Ti-6Al-4V , 2021, The International Journal of Advanced Manufacturing Technology.

[11]  L. Aubouy,et al.  Formulation of Sustainable Water-Based Cutting Fluids with Polyol Esters for Machining Titanium Alloys , 2021, Metals.

[12]  D. Xiang,et al.  Cutting force model of longitudinal-torsional ultrasonic-assisted milling Ti-6Al-4V based on tool flank wear , 2021 .

[13]  Wonkyun Lee,et al.  Optimization of cutting fluid supply based on the motor current , 2021, Journal of Mechanical Science and Technology.

[14]  P. Feng,et al.  Performance analysis of the longitudinal-torsional ultrasonic milling of Ti-6Al-4V , 2021, The International Journal of Advanced Manufacturing Technology.

[15]  M. Bermingham,et al.  Challenges in laser-assisted milling of titanium alloys , 2021, International Journal of Extreme Manufacturing.

[16]  D. Xiang,et al.  Surface characteristics investigation of ultrasonic longitudinal-torsional milling of high–volume fraction SiCp/Al , 2020, The International Journal of Advanced Manufacturing Technology.

[17]  M. Zaeh,et al.  Experimental investigations on longitudinal-torsional vibration-assisted milling of Ti-6Al-4V , 2020, The International Journal of Advanced Manufacturing Technology.

[18]  J. Tong,et al.  A study ofthe surface microstructure and tool wear of titanium alloys after ultrasonic longitudinal-torsional milling , 2020 .

[19]  Xicong Zou,et al.  Sustainable production of dry-ultra-precision machining of Ti–6Al–4V alloy using PCD tool under ultrasonic elliptical vibration-assisted cutting , 2020 .

[20]  S. K. Choudhury,et al.  A realistic 3D finite element model for simulating multiple rotations of modified milling inserts using coupled temperature-displacement analysis , 2020 .

[21]  D. Huo,et al.  Finite element simulation and experimental investigation on cutting mechanism in vibration-assisted micro-milling , 2019, The International Journal of Advanced Manufacturing Technology.

[22]  Bo Zhao,et al.  Finite element analysis of ultrasonic assisted milling of SiCp/Al composites , 2019, The International Journal of Advanced Manufacturing Technology.

[23]  Jarosław Sęp,et al.  Experimental investigation into surface texture effect on journal bearings performance , 2019, Tribology International.

[24]  Girish Chandra Verma,et al.  Machining forces in ultrasonic‐vibration assisted end milling , 2019, Ultrasonics.

[25]  K. Cheng,et al.  Longitudinal–torsional ultrasonic vibration-assisted side milling process , 2019, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[26]  Lin-hong Xu,et al.  Machinablity improvement with ultrasonic vibration–assisted micro-milling , 2018, Advances in Mechanical Engineering.

[27]  Li Zhao,et al.  Surface microstructure of titanium alloy thin-walled parts at ultrasonic vibration-assisted milling , 2018, The International Journal of Advanced Manufacturing Technology.

[28]  Tianbiao Yu,et al.  MQL milling of TC4 alloy by dispersing graphene into vegetable oil-based cutting fluid , 2018, The International Journal of Advanced Manufacturing Technology.

[29]  Zhichao Yang,et al.  Analytical modeling of tool-workpiece contact rate and experimental study in ultrasonic vibration-assisted milling of Ti–6Al–4V , 2018, International Journal of Mechanical Sciences.

[30]  Suha K. Shihab,et al.  Optimization of WEDM Process Parameters for Machining of Friction-Stir-Welded 5754 Aluminum Alloy Using Box–Behnken Design of RSM , 2018, Arabian Journal for Science and Engineering.

[31]  Wanqun Chen,et al.  State-of-the-art review on vibration-assisted milling: principle, system design, and application , 2018 .

[32]  Chuanzhen Huang,et al.  The micro-cutting performance of cermet and coated WC micro-mills in machining of TC4 alloy micro-grooves , 2018 .

[33]  Uday S. Dixit,et al.  Modeling of static machining force in axial ultrasonic-vibration assisted milling considering acoustic softening , 2018 .

[34]  G. R. Johnson,et al.  A CONSTITUTIVE MODEL AND DATA FOR METALS SUBJECTED TO LARGE STRAINS, HIGH STRAIN RATES AND HIGH TEMPERATURES , 2018 .

[35]  Jagadeesh K. Mannekote,et al.  Environmentally friendly functional fluids from renewable and sustainable sources-A review , 2018 .

[36]  M. Tsai,et al.  The Machining of Hard Mold Steel by Ultrasonic Assisted End Milling , 2016 .

[37]  C. Mitterer,et al.  Finite element study of the influence of hard coatings on hard metal tool loading during milling , 2016 .

[38]  A. Maurotto,et al.  Experimental investigations on effects of frequency in ultrasonically-assisted end-milling of AISI 316L: A feasibility study. , 2016, Ultrasonics.

[39]  Vimal Dhokia,et al.  Investigation of the effects of cryogenic machining on surface integrity in CNC end milling of Ti-6Al-4V titanium alloy , 2016 .

[40]  M. Razfar,et al.  The Role of Dry Aero-acoustical Lubrication and Material Softening in Ultrasonically Assisted Milling of Difficult-to-Cut AISI 304 Steels , 2015, Transactions of the Indian Institute of Metals.

[41]  M. Bermingham,et al.  FEA Modelling of Cutting Force and Chip Formation in Thermally Assisted Machining of Ti6Al4V Alloy , 2013 .

[42]  Vimal Dhokia,et al.  Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids , 2012 .

[43]  Yusuf Altintas,et al.  Prediction of micro-milling forces with finite element method , 2012 .

[44]  J. Paulo Davim,et al.  Machining with Minimal Cutting Fluid , 2012 .

[45]  M. Barua,et al.  Measurement of surface roughness through RSM: effect of coated carbide tool on 6061-t4 aluminium , 2010 .

[46]  Paul Mativenga,et al.  Assessment of the machinability of Ti-6Al-4V alloy using the wear map approach , 2009 .

[47]  Izhak Etsion,et al.  The Effect of Laser Texturing of Steel Surfaces and Speed-Load Parameters on the Transition of Lubrication Regime from Boundary to Hydrodynamic , 2004 .