Characterisation of Anisotropic, Non-Homogeneous Beam Sections with Embedded Piezo-Electric Materials

The paper discusses the problem of the characterisation of untwisted, untapered, anisotropic and non-homogeneous straight beams with embedded piezo-electric devices. The determination of the section properties, i.e., the generalised electro-elastic stiffness and compliance matrices, is performed through an in-plane discretisation in a finite element way, in which the axial dependence of the unknown is handled in analytical form. This leads to a semi-analytical formulation that allows the solution of both the "central" and the "extremity" problems, namely, the indefinite and the boundary solutions. The piezo-electric generalisation implies the modelling of electro-static potential field. The peculiar bound for piezo-electric devices, the conductive laminae that allow sensing and actuation, implies a distributed non-holonomic constraint to the related electric variables. The section finite element discretisation allows detailed stress and electric displacement recovery, thus, giving the designer a powerful analysis tool. A Finite Volumes formulation is used in order to simplify the determination of the three-dimensional beam properties. This technique leads to punctual stiffness matrix evaluation, skipping numerical integration, and is intrinsically locking free. A complete set of numerical simulations and comparisons with three-dimensional models demonstrate the effectiveness and soundness of the proposed formulation.

[1]  M. J. Carpenter,et al.  Using Energy Methods to Derive Beam Finite Elements Incorporating Piezoelectric Materials , 1997 .

[2]  Paolo Mantegazza,et al.  On the C0 Discretisation of Beams by Finite Elements and Finite Volumes , 1997 .

[3]  Gian Luca Ghiringhelli,et al.  On the linear three-dimensional behaviour of composite beams , 1997 .

[4]  Gian Luca Ghiringhelli,et al.  On the thermal problem for composite beams using a finite element semi-discretisation , 1997 .

[5]  Paolo Mantegazza,et al.  Multi-Body Aeroelastic Analysis of Smart Rotor Blades, Actuated by Means of Piezo-Electric Devices , 1997 .

[6]  Paolo Mantegazza,et al.  Numerical Modelling of Anisotropic non Homogeneous Beams with Embedded Piezoelectric Sensors and Actuators , 1996 .

[7]  Paolo Gaudenzi,et al.  Pin-force and Euler-Bernoulli models for analysis of intelligent structures , 1995 .

[8]  Dimitris A. Saravanos,et al.  Coupled Layerwise Analysis of Composite Beams with Embedded Piezoelectric Sensors and Actuators , 1995 .

[9]  G. Ghiringhelli Piezoelectric Structures Characterisation by Integrated FEM Modelisation , 1995 .

[10]  Craig A. Rogers,et al.  Application of Commercial Finite Element Codes for the Analysis of Induced Strain-Actuated Structures , 1994 .

[11]  Craig A. Rogers,et al.  The Pin-Force Model Revisited , 1994 .

[12]  Paolo Mantegazza,et al.  Linear, straight and untwisted anisotropic beam section properties from solid finite elements , 1994 .

[13]  Marco Borri,et al.  Composite beam analysis linear analysis of naturally curved and twisted anisotropic beams , 1992 .

[14]  John B. Kosmatka,et al.  On the Behavior of Pretwisted Beams With Irregular Cross-Sections , 1992 .

[15]  Carlos E. S. Cesnik,et al.  On a simplified strain energy function for geometrically nonlinear behaviour of anisotropic beams , 1991 .

[16]  Alan D. Stemple,et al.  Finite-Element Model for Composite Beams with Arbitrary Cross-Sectional Warping , 1988 .

[17]  E. Crawley,et al.  Use of piezoelectric actuators as elements of intelligent structures , 1987 .

[18]  J. C. Simo,et al.  A three-dimensional finite-strain rod model. Part II: Computational aspects , 1986 .

[19]  M. Borri,et al.  A large displacement formulation for anisotropic beam analysis , 1986 .

[20]  O. Bauchau A Beam Theory for Anisotropic Materials , 1985 .

[21]  J. C. Simo,et al.  A finite strain beam formulation. The three-dimensional dynamic problem. Part I , 1985 .

[22]  M. Borri,et al.  Anisotropic beam theory and applications , 1983 .

[23]  K. Bathe,et al.  Large displacement analysis of three‐dimensional beam structures , 1979 .