Composite electrolyte based on nanostructured Ce0.8Sm0.2O1.9 (SDC) for low‐temperature solid oxide fuel cells

SUMMARY Nanostructured Ce0.8Sm0.2O1.9 (SDC) is investigated for low-temperature solid oxide fuel cells based on SDC- 30 wt% (53 mol% Li2CO3:47 mol% Na2CO3) composite electrolyte in this work. SDC is prepared by the combined citrate and EDTA complexing method. X-ray powder diffraction shows that it forms a well-cubic fluorite structure after being sintered at 7001C for 2 h. The particle is about 12 nm detected by the transmission electron microscopy. Conductivity for the composite is much higher than the pure SDC at comparable temperatures. A transition of ionic conductivity occurs at 4501C for the composite electrolyte. The single cells are fabricated by a simple dry-pressing process and tested at 450–6001C. A maximum power density of 900 mW cm � 2 and the open-circuit voltage of 0.92 V are achieved at 6001C. The conduction mechanism has been discussed by comparing the conductivity of composite electrolyte under different conditions. AC impedance for single cell indicates that the electrochemical process involving cathode and anode reactions is the rate-limiting step. Copyright r 2009 John Wiley & Sons, Ltd.

[1]  G. Meng,et al.  Effect of powder preparation on (CeO2)0.8(Sm2O3)0.1 thin film properties by screen-printing , 2004 .

[2]  Bei-bei Liu,et al.  High reactive Ce0.8Sm0.2O1.9 powders via a carbonate co-precipitation method as electrolytes for low-temperature solid oxide fuel cells , 2008 .

[3]  Bin Zhu,et al.  Innovative low temperature SOFCs and advanced materials , 2003 .

[4]  B. Zhu.  Applications of hydrofluoride ceramic membranes for advanced fuel cell technology , 2000 .

[5]  B. Zhu,et al.  Solid oxide fuel cell (SOFC) using industrial grade mixed rare-earth oxide electrolytes , 2008 .

[6]  Juncai Sun,et al.  Calcium doped ceria-based materials for cost-effective intermediate temperature solid oxide fuel cells , 2003 .

[7]  Zongping Shao,et al.  Anode-supported ScSZ-electrolyte SOFC with whole cell materials from combined EDTA–citrate complexing synthesis process , 2007 .

[8]  A. K. Tyagi,et al.  Powder characteristics and sinterability of ceria powders prepared through different routes , 2006 .

[9]  Bin Zhu,et al.  Next generation fuel cell R&D , 2006 .

[10]  G. Meng,et al.  Electrochemical performance of a solid oxide fuel cell based on Ce0.8Sm0.2O2−δ electrolyte synthesized by a polymer assisted combustion method , 2007 .

[11]  Bin Zhu,et al.  Functional ceria–salt-composite materials for advanced ITSOFC applications , 2003 .

[12]  Lizhai Yang,et al.  A high-performance ceramic fuel cell with samarium doped ceria–carbonate composite electrolyte at low temperatures , 2006 .

[13]  G. Meng,et al.  Sintering and electrical properties of (CeO2)0.8(Sm2O3)0.1 powders prepared by glycine–nitrate process , 2002 .

[14]  Zhixiang Liu,et al.  Performance of fuel cells with proton-conducting ceria-based composite electrolyte and nickel-based electrodes , 2008 .

[15]  Zhigang Zhu,et al.  Development of cathodes for methanol and ethanol fuelled low temperature (300–600 °C) solid oxide fuel cells , 2007 .

[16]  V. Birss,et al.  Oxygen reduction at sol–gel derived La0.8Sr0.2Co0.8Fe0.2O3 cathodes , 2006 .

[17]  Zhixiang Liu,et al.  Development of novel low-temperature SOFCs with co-ionic conducting SDC-carbonate composite electrolytes , 2007 .