Numerical study of heat transfer performance of single-phase heat sinks with micro pin-fin structures

[1]  Ali Koşar,et al.  Parametric study on the effect of end walls on heat transfer and fluid flow across a micro pin-fin , 2011 .

[2]  M. Paraschivoiu,et al.  Single-phase fluid flow and mixing in microchannels , 2011 .

[3]  Omid Abouali,et al.  Numerical Investigation of Heat Transfer Enhancement in a Microchannel With Grooved Surfaces , 2010 .

[4]  Ali Koşar,et al.  Effect of substrate thickness and material on heat transfer in microchannel heat sinks , 2010 .

[5]  K. Turner,et al.  Comparison of Micro-Pin-Fin and Microchannel Heat Sinks Considering Thermal-Hydraulic Performance and Manufacturability , 2010, IEEE Transactions on Components and Packaging Technologies.

[6]  Fangjun Hong,et al.  Three dimensional numerical analyses and optimization of offset strip-fin microchannel heat sinks , 2009 .

[7]  Mahmood Yaghoubi,et al.  Influence of channel geometry on the performance of a counter flow microchannel heat exchanger , 2009 .

[8]  W. Qu.  Comparison of thermal-hydraulic performance of singe-phase micro-pin-fin and micro-channel heat sinks , 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

[9]  Bayram Sahin,et al.  Performance analysis of a heat exchanger having perforated square fins , 2008 .

[10]  C. Nonino,et al.  Three-dimensional roughness effect on microchannel heat transfer and pressure drop , 2007 .

[11]  H. Abbassi.  Entropy generation analysis in a uniformly heated microchannel heat sink , 2007 .

[12]  Zhaonian Cheng,et al.  A Study of CFD Simulation for On-chip Cooling with 2D CNT Micro-fin Array , 2007, 2007 International Symposium on High Density packaging and Microsystem Integration.

[13]  Y. Cheng,et al.  Numerical simulation of stacked microchannel heat sink with mixing-enhanced passive structure , 2007 .

[14]  A. Koşar,et al.  Thermal-hydraulic performance of MEMS-based pin fin heat sink , 2006 .

[15]  A. Koşar,et al.  Forced convective heat transfer across a pin fin micro heat sink , 2005 .

[16]  S. Kim,et al.  Averaging approach for microchannel heat sinks subjected to the uniform wall temperature condition , 2004, Proceedings of 6th Electronics Packaging Technology Conference (EPTC 2004) (IEEE Cat. No.04EX971).

[17]  Satish G. Kandlikar,et al.  Evaluation of Single Phase Flow in Microchannels for High Heat Flux Chip Cooling—Thermohydraulic Performance Enhancement and Fabrication Technology , 2004 .

[18]  G. Morini.  Single-phase Convective Heat Transfer in Microchannels: a Review of Experimental Results , 2004 .

[19]  Wen-Quan Tao,et al.  A unified analysis on enhancing single phase convective heat transfer with field synergy principle , 2002 .

[20]  M. Yovanovich,et al.  Optimization of pin-fin heat sinks using entropy generation minimization , 2001, IEEE Transactions on Components and Packaging Technologies.

[21]  Renwei Mei,et al.  Vapor bubble departure in forced convection boiling , 1993 .

[22]  T. Kishimoto,et al.  Cooling characteristics of diamond-shaped interrupted cooling fin for high-power LSI devices , 1987 .

[23]  A. Bejan,et al.  Entropy Generation Through Heat and Fluid Flow , 1983 .

[24]  H. Hegab,et al.  Multi Layer Micro Pin-Fins Heat Sinks for Better Performance , 2010 .

[25]  Ali Koşar,et al.  Parameter optimization of a micro heat sink with circular pin-fins , 2010 .

[26]  W. Khan,et al.  Modeling of Fluid Flow and Heat Transfer for Optimization of Pin-Fin Heat Sinks , 2004 .

[27]  S. Kandlikar,et al.  Optimization of Microchannel Geometry for Direct Chip Cooling Using Single Phase Heat Transfer , 2004 .

[28]  R. Shah,et al.  Handbook of single-phase convective heat transfer , 1987 .

[29]  R. Shah.  Laminar Flow Forced convection in ducts , 1978 .