Connected Vibrating Piezoelectric Bimorph Beams as a Wide-band Piezoelectric Power Harvester

We analyze coupled flexural vibration of two elastically and electrically connected piezoelectric beams near resonance for converting mechanical vibration energy to electrical energy. Each beam is a so-called piezoelectric bimorph with two layers of piezoelectrics. The 1D equations for bending of piezoelectric beams are used for a theoretical analysis. An exact analytical solution to the beam equations is obtained. Numerical results based on the solution show that the two resonances of individual beams can be tuned as close as desired by design when they are connected to yield a wide-band electrical output. Therefore, the structure can be used as a wide-band piezoelectric power harvester.

[1]  Jiashi Yang,et al.  A low frequency piezoelectric power harvester using a spiral-shaped bimorph , 2006 .

[2]  Hu Yuantai,et al.  Analysis of a Piezoelectric Bimorph Plate with a Central-Attached Mass as an Energy Harvester , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[3]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[4]  Huan Xue,et al.  A spiral-shaped harvester with an improved harvesting element and an adaptive storage circuit , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  Sung Kyu Ha,et al.  Analysis of the asymmetric triple-layered piezoelectric bimorph using equivalent circuit models , 2001 .

[6]  Y. Eugene Pak,et al.  Five-port equivalent electric circuit of piezoelectric bimorph beam , 2000 .

[7]  W. Nunnally,et al.  Energy conversion and high power pulse production using miniature piezoelectric compressors , 2000 .

[8]  Yuantai Hu,et al.  Analysis of a piezoelectric bimorph plate with a central-attached mass as an energy harvester. , 2007, IEEE transactions on ultrasonics, ferroelectrics, and frequency control.

[9]  Yuantai Hu,et al.  A piezoelectric power harvester with adjustable frequency through axial preloads , 2007 .

[10]  Yuantai Hu,et al.  Performance of a piezoelectric harvester in thickness-stretch mode of a plate. , 2005, IEEE transactions on ultrasonics, ferroelectrics, and frequency control.

[11]  Joseph R. Burns,et al.  The Energy Harvesting Eel: a small subsurface ocean/river power generator , 2001 .

[12]  Chuanyao Chen,et al.  Adjusting the resonant frequency of a PVDF bimorph power harvester through a corrugation-shaped harvesting structure , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[13]  Jan M. Rabaey,et al.  A study of low level vibrations as a power source for wireless sensor nodes , 2003, Comput. Commun..

[14]  Y. Eugene Pak,et al.  Five-port equivalent electric circuit of piezoelectric bimorph beam , 1999, Smart Structures.

[15]  Jiashi Yang,et al.  A low frequency piezoelectric power harvester using a spiral-shaped bimorph , 2006 .

[16]  We Wie.  Elementary Differential Equations and Boundary Value Problems , 1977 .

[17]  Hongping Hu,et al.  Performance of a Piezoelectric Bimorph Harvester with Variable Width , 2007 .

[18]  Yuantai Hu,et al.  Analysis of a piezoelectric ceramic shell in thickness-shear vibration as a power harvester , 2006 .

[19]  Yuantai Hu,et al.  An exact analysis of a rectangular plate piezoelectric generator , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[20]  Jiashi Yang,et al.  Performance of a piezoelectric bimorph for scavenging vibration energy , 2005 .