A large-acceptance beam-deceleration module for retrofitting into ion-source beam lines.

We describe a large-acceptance deceleration module capable of decelerating large-emittance full-intensity ion beams typical of ECR ion sources to very low energies with high efficiency. The deceleration module is designed to permit convenient retrofitting into an existing beam line to replace, e.g., the first Faraday cup after magnetic analysis of the beam extracted from the ion source. For starting energies of 10 keV, and incident ion currents as large as 300 μA, deceleration efficiencies have been measured to be greater than 80% for final energies as low as 70 eV. The decelerated beam intensity can be monitored either by insertion of a beam catcher floating at the final deceleration voltage or from the current to the exit grid itself, with suitable correction applied for the grid transparency factor. The behavior of the deceleration optics was modeled using SIMION, incorporating the effects of intra-beam space charge repulsion. We describe a recent application of this deceleration module to study near-surface He bubble and blister formation of a W target heated to 1250 K and irradiated with a 98 eV He ion beam with a flux of ∼10(16) cm(-2) s(-1).

[1]  H. Kurishita,et al.  Helium bubble formation on tungsten in dependence of fabrication method , 2011 .

[2]  P. R. Harris,et al.  Erosion of a-C:D thin films by low energy D+, D2+, and D3+ ion beam irradiation , 2011 .

[3]  Herbert Shea,et al.  Electrical conductivity and Young"s modulus of flexible nanocomposites made by metal ion implantation of Polydimethylsiloxane: the relationship between nanostructure and macroscopic properties , 2011 .

[4]  P. R. Harris,et al.  Plasma potential and energy spread determination using ion beams extracted from an electron cyclotron resonance source. , 2010, The Review of scientific instruments.

[5]  K. Tokunaga,et al.  The effects of high fluence mixed-species (deuterium, helium, beryllium) plasma interactions with tungsten , 2009 .

[6]  R. Doerner,et al.  Helium induced nanoscopic morphology on tungsten under fusion relevant plasma conditions , 2008 .

[7]  S. Takamura,et al.  Formation of Nanostructured Tungsten with Arborescent Shape due to Helium Plasma Irradiation , 2006 .

[8]  M. Bannister,et al.  Ion‐Implantation‐Related Atomic Collision Studies at the ORNL Multicharged Ion Research Facility , 2002 .

[9]  N. Yoshida,et al.  Microstructure evolution in tungsten during low-energy helium ion irradiation , 2000 .

[10]  F. Meyer,et al.  Multicharged ion–surface measurements at ORNL MIRF using decelerated beams , 1999 .

[11]  F. Meyer,et al.  Multicharged Ion–Surface Interaction Studies at ORNL with Decelerated Beams , 1999 .

[12]  T. Märk,et al.  The statistics of electron emission from clean metal surfaces induced by slow ions: measurement and recent applications , 1993 .