Development of thermoacoustic devices for power generation and refrigeration

This paper is intended as a technical overview of the research and development work initially undertaken at the University of Manchester and subsequently transferred to the University of Leicester as part of the EPSRC-funded SCORE project (Stove for Cooking, Refrigeration and Electricity supply). The objectives of the work were twofold: Firstly, to develop an early demonstrator of a low-power electricity generator (to deliver approximately 10–20 W of electricity). This was to be based on the concept of using low-cost materials, working fluids and linear alternators suitable for deployment in rural areas of developing countries. The issues of concern here were the development of a suitable thermoacoustic engine topology and control measures; design of suitable heat exchanger configurations from initial use of electrical heaters to heat input through propane combustion; and characterisation of commercial loudspeakers to work as linear alternators and subsequent incorporation of selected models for engine prototyping purposes. These matters will be illustrated by a number of demonstrators and their testing in the laboratory environment. Secondly, to develop a demonstrator of a combustion driven thermoacoustic cooler for storage of vital medical supplies in remote and rural areas where there is no access to electricity grid. To this end, the paper will describe the design, construction and test results of an electrically driven demonstrator of a standing wave thermoacoustic engine coupled to a travelling wave thermoacoustic cooler. The final part of the paper will summarise the achievements to date and outline future work that has spun out from the original SCORE project. This will in particular include the current work on a scaled up version of electricity generator designed to deliver 100 W of electricity by using a two-stage engine configuration and the issues of integration of the thermoacoustic electricity generator and thermoacoustic cooler into one system.

[1]  Swift,et al.  Thermoacoustic separation of a He-Ar mixture , 2000, Physical review letters.

[2]  Tetsushi Biwa,et al.  A pistonless Stirling cooler , 2002 .

[3]  Artur J. Jaworski,et al.  Demonstrator of a combustion driven thermoacoustic electricity generator for remote and rural areas of developing countries , 2012 .

[4]  S. Spoelstra,et al.  Study of a coaxial thermoacoustic-Stirling cooler , 2008 .

[5]  P. Duthil,et al.  Experimental Characterization of a Thermoacoustic Travelling-Wave Refrigerator , 2011 .

[6]  Keith Robert Pullen,et al.  Development of a wood-fired cooking stove to incorporate a thermo-acoustic engine-generator unit , 2013 .

[7]  Terrence W. Simon,et al.  7th International Energy Conversion Engineering Conference , 2009 .

[8]  Gregory W. Swift,et al.  DESIGN ENVIRONMENT FOR LOW-AMPLITUDE THERMOACOUSTIC ENGINES , 1994 .

[9]  Ercang Luo,et al.  Experimental investigation of a 500 W traveling-wave thermoacoustic electricity generator , 2011 .

[10]  John William Strutt,et al.  Scientific Papers: The Explanation of certain Acoustical Phenomena , 2009 .

[11]  G. Swift,et al.  A thermoacoustic-Stirling heat engine: detailed study , 2000, The Journal of the Acoustical Society of America.

[12]  Richard Raspet,et al.  Thermoacoustic power conversion using a piezoelectric transducer. , 2010, The Journal of the Acoustical Society of America.

[13]  Peter H. Ceperley,et al.  Gain and efficiency of a short traveling wave heat engine , 1984 .

[14]  C. Heiden,et al.  A two-stage pulse tube cooler operating below 4 K , 1997 .

[15]  Nikolaus Rott,et al.  Damped and thermally driven acoustic oscillations in wide and narrow tubes , 1969 .

[16]  Jithin George.  Loud Speaker Driven Thermo Acoustic Refrigeration , 2001 .

[17]  Carl Q. Howard,et al.  Waste-heat-driven thermoacoustic engine and refrigerator , 2009 .

[18]  J. Braun,et al.  Phase of acoustic impedance and performance of standing wave thermoacoustic coolers , 2009 .

[19]  J. Zeegers,et al.  Prandtl number and thermoacoustic refrigerators. , 2002, The Journal of the Acoustical Society of America.

[20]  J. Zeegers,et al.  The optimal stack spacing for thermoacoustic refrigeration. , 2002, The Journal of the Acoustical Society of America.

[21]  Scott Backhaus,et al.  Development of a thermoacoustic natural gas liquefier. , 2002 .

[22]  Gregory W. Swift,et al.  Analysis and performance of a large thermoacoustic engine , 1992 .

[23]  Scott Backhaus,et al.  A low-cost electricity generator for rural areas using a travelling-wave looped-tube thermoacoustic engine , 2010 .

[24]  K. Blok.  Low operating temperature integral thermo acoustic devices for solar cooling and waste heat recovery , 2008 .

[25]  Artur J. Jaworski,et al.  Design of a Low-Cost Two-Stage Thermoacoustic Electricity Generator for Rural Communities in Developing Countries , 2012 .

[26]  G. Swift.  Thermoacoustics: A Unifying Perspective for Some Engines and Refrigerators , 2017 .

[27]  Keith Robert Pullen,et al.  Cooking and lighting habits in rural Nepal and Uganda , 2013 .

[28]  Scott Backhaus,et al.  Traveling-wave thermoacoustic electric generator , 2004 .

[29]  S. Spoelstra,et al.  A high performance thermoacoustic engine , 2011 .

[30]  Kees de Blok.  Novel 4-Stage Traveling Wave Thermoacoustic Power Generator , 2010 .

[31]  Ercang Luo,et al.  Experimental study of a thermoacoustically-driven traveling wave thermoacoustic refrigerator , 2011 .

[32]  D. Gedeon.  DC Gas Flows in Stirling and Pulse Tube Cryocoolers , 1997 .

[33]  Scott Backhaus,et al.  Travelling-wave thermoacoustic electricity generator using an ultra-compliant alternator for utilization of low-grade thermal energy , 2012 .

[34]  Scott Backhaus,et al.  Design and testing of a travelling-wave looped-tube engine for low-cost electricity generators in remote and rural areas , 2009 .

[35]  Peter H. Ceperley,et al.  A pistonless Stirling engine—The traveling wave heat engine , 1979 .

[36]  P. H. Riley,et al.  Low-cost, electricity-generating heat engines for rural areas , 2013 .

[37]  Steven L. Garrett,et al.  A thermoacoustic refrigerator for space applications. , 1989 .

[38]  Hofler,et al.  Design and construction of a solar-powered, thermoacoustically driven, thermoacoustic refrigerator , 2000, The Journal of the Acoustical Society of America.

[39]  W. Dai,et al.  A Heat-driven thermoacoustic cooler capable of reaching liquid nitrogen temperature , 2005 .

[40]  Artur J. Jaworski,et al.  A method of characterising performance of audio loudspeakers for linear alternator applications in low-cost thermoacoustic electricity generators , 2011 .

[41]  G. Swift,et al.  Two-sensor power measurements in lossy ducts. , 1992, The Journal of the Acoustical Society of America.

[42]  Hiroyuki Sugita,et al.  Experimental study on thermally actuated pressure wave generator for space cryocooler , 2004 .

[43]  Nikolaus Rott,et al.  Thermally driven acoustic oscillations, part III: Second-order heat flux , 1975 .

[44]  G. Swift,et al.  A thermoacoustic Stirling heat engine , 1999, Nature.

[45]  G. Swift,et al.  A cascade thermoacoustic engine. , 2003, The Journal of the Acoustical Society of America.

[46]  Rayleigh.  The Explanation of Certain Acoustical Phenomena , 1878, Nature.

[47]  T. Yazaki,et al.  TRAVELING WAVE THERMOACOUSTIC ENGINE IN A LOOPED TUBE , 1998 .

[48]  Ercang Luo,et al.  Detailed study of a traveling wave thermoacoustic refrigerator driven by a traveling wave thermoacoustic engine , 2006 .

[49]  Artur J. Jaworski,et al.  Vortex shedding flow patterns and their transitions in oscillatory flows past parallel-plate thermoacoustic stacks , 2010 .

[50]  Zhihua Gan,et al.  Investigation on a thermoacoustically driven pulse tube cooler working at 80 K , 2005 .