Understanding process intensification in cyclic distillation systems

Abstract The most effective separation possible in distillation columns takes place in the hydrodynamic regime where there is perfect displacement of the liquid and vapor streams. This can be achieved in distillation equipment with separate phase movement (SPM). Such an innovative route for process intensification in distillation is called cyclic distillation. The required process conditions are the lack of liquid outflow from the tray during vapor admission and the lack of liquid mixing in adjacent trays upon outflow of liquid. Remarkably, the throughput of such a column that operates in a controlled cycle mode is two or more times higher than the throughput reachable with conventional operation, at equivalent separation performance. In this study, a theoretical stage model with perfect displacement is proposed and the theory of the process working lines is developed. An adequate mass transfer model is also described along with the mode of calculation of tray columns operating in the cyclic operation mode. Sensitivity analysis was used to determine the effect of the key model parameters. The theoretical developments were implemented at industrial scale and subsequent testing showed an increase in the separation efficiency of 2–3 times as compared to the standard process.

[1]  I. A. Furzer.  The discrete residence time distribution of a distillation colum operated with microprocessor controlled periodic cycling , 1978 .

[2]  Ljubica Matijašević,et al.  Dividing wall column—A breakthrough towards sustainable distilling , 2010 .

[3]  Bärbel Kolbe,et al.  Novel distillation concepts using one-shell columns , 2004 .

[4]  Ram Lavie,et al.  Stepwise periodic distillation—I: Total reflux operation , 1980 .

[5]  Costin Sorin Bildea,et al.  Design and control of recycle systems by non-linear analysis , 2007, Comput. Chem. Eng..

[6]  Hidekazu Kurimoto,et al.  Binary periodic distillation scheme with enhanced energy conservation—I: Principle and computer simulation , 1985 .

[7]  I. A. Furzer,et al.  Periodic cycling of distillation columns using a new tray design , 1985 .

[8]  Zoltan K. Nagy,et al.  Dynamic modelling and nonlinear model predictive control of a Fluid Catalytic Cracking Unit , 2009, Comput. Chem. Eng..

[9]  Verle N. Schrodt,et al.  Plant-scale study of controlled cyclic distillation , 1967 .

[10]  Jude T. Sommerfeld,et al.  Studies of Controlled Cyclic Distillation: I. Computer Simulations and the Analogy with Conventional Operation , 1966 .

[11]  Jude T. Sommerfeld,et al.  Study of Controlled Cyclic Distillation: II. Analytical Transient Solution and Asymptotic Plate Efficiencies , 1966 .

[12]  Anton A. Kiss,et al.  Energy efficient control of a BTX dividing-wall column , 2011, Comput. Chem. Eng..

[13]  N. I. Gel'perin,et al.  Opfration of a bubble-cap fractionating column in a cyclic regime , 1975 .

[14]  Marko Bacic,et al.  Model predictive control , 2003 .

[15]  Konrad Hungerbühler,et al.  Optimal rectification column, reboiler vessel, connection pipe selection and optimal control of batch distillation considering hydraulic limitations , 2009 .

[16]  I. A. Furzer,et al.  Hydrodynamic simulation of periodic cycled plate columns , 1985 .

[17]  Warren K. Lewis,et al.  Rectification of Binary mixtures , 1936 .

[18]  Jan Harmsen,et al.  Process intensification in the petrochemicals industry: Drivers and hurdles for commercial implementation , 2010 .

[19]  E. W. Thiele,et al.  Graphical Design of Fractionating Columns , 1925 .

[20]  G. J. Harmsen,et al.  Reactive distillation: The front-runner of industrial process intensification - A full review of commercial applications, research, scale-up, design and operation , 2007 .

[21]  Anton A. Kiss,et al.  REACTIVE DIVIDING-WALL COLUMNS—HOW TO GET MORE WITH LESS RESOURCES? , 2009 .

[22]  R. A. Gaska,et al.  Controlled Cycling Distillation in Sieve and Screen Plate Towers , 1961 .

[23]  S. Bay Jørgensen,et al.  An integration method for dynamic simulation of cycled processes , 1989 .

[24]  Ž. Olujić,et al.  Equipment improvement trends in distillation , 2009 .

[25]  Anton A. Kiss,et al.  Comparison of Control Strategies for Dividing-Wall Columns , 2010 .

[26]  Ram Lavie,et al.  Stepwise periodic distillation—II: Separation of a binary mixture , 1981 .

[27]  Hidekazu Kurimoto,et al.  Binary periodic distillation scheme with enhanced energy conservation—II: Experiment , 1985 .

[28]  Zoltan K. Nagy,et al.  Evaluation study of an efficient output feedback nonlinear model predictive control for temperature tracking in an industrial batch reactor , 2007 .

[29]  Costin Sorin Bildea,et al.  A control perspective on process intensification in dividing-wall columns , 2011 .

[30]  M. R. Cannon,et al.  Controlled Cycling Distillation in a Packed-Plate Column , 1961 .

[31]  A. J. Engel,et al.  ANALYSIS OF CONTROLLED CYCLING MASS TRANSFER OPERATIONS , 1967 .

[32]  Orlando R. Rivas.  An Analytical Solution of Cyclic Mass Transfer Operations , 1977 .

[33]  George Tsatsaronis,et al.  Reducing the energy demand of continuous distillation processes by optimal controlled forced periodic operation , 2001 .

[34]  I. A. Furzer,et al.  Mass transfer in periodically cycled plate columns containing multiple sieve plates , 1980 .