Wall friction measurement and compaction characteristics of bentonite powders

Abstract This paper presents a new method (referred to as direct method) for measuring wall friction during powder compaction and ejection. The accuracy for wall friction force measurement by both new and conventional methods (referred to as indirect method) were first studied according to the theory of error propagation. The error sources for compact density measurement in both methods were also examined. Based on the accuracy in the measurement of wall friction force and compact density, the direct method is compared favorably to the indirect method. Two bentonites, Black Hills bentonite and Zhi-Hsing bentonite which were considered as the candidate buffer materials for the geological disposal of high-level radioactive wastes were adopted to conduct a series of compaction and ejection tests. The compaction characteristics of bentonite blocks were expressed in terms of compressibility curve, wall friction ratio and friction index. The Gurnham's equation was used to describe the compressibility curve. The effects of the aspect ratio of block on the friction ratio and friction index are discussed from both experimental and theoretical point of views. Ejection profiles of the compacted bentonite blocks during ejection phase were presented. The proposed measuring method is validated by comparing the readings of ejection force recorded by both upper load cell and ring-type load cell.

[1]  Henry Liu,et al.  Wall friction and lubrication during compaction of coal logs , 1996 .

[2]  James Graham,et al.  Influence of pressure, saturation, and temperature on the behaviour of unsaturated sand-bentonite , 1998 .

[3]  S. L. Rough,et al.  The effects of wall friction on the ejection of pressed ceramic parts , 1998 .

[4]  D. E. Beasley,et al.  Theory and design for mechanical measurements , 1991 .

[5]  Yu-Jun Cui,et al.  On the high stress compression of bentonites , 2002 .

[6]  D. Bouvard,et al.  Experimental Techniques for Analysis of Die Pressing and Ejection of Metal Powder , 1997 .

[7]  M N Gray,et al.  Swelling capacity and permeability of an unprocessed and a processed bentonitic clay , 1990 .

[8]  S. L. Rough,et al.  The effects of wall friction in powder compaction , 1998 .

[9]  Roland Pusch,et al.  Waste Disposal in Rock , 1994 .

[10]  P. J. Denny.  Compaction equations: a comparison of the Heckel and Kawakita equations , 2002 .

[11]  J. Graham,et al.  The effective stress concept in saturated sand–clay buffer , 1992 .

[12]  Hideo Komine,et al.  EXPERIMENTAL STUDY ON SWELLING CHARACTERISTICS OF SAND-BENTONITE MIXTURE FOR NUCLEAR WASTE DISPOSAL , 1999 .

[13]  Hiroyasu Takase,et al.  Mechanical interaction between swelling compacted clay and fractured rock, and the leaching of clay colloids , 1999 .

[14]  Pierre Dorémus,et al.  Analysis of die compaction of tungsten carbide and cobalt powder mixtures , 1999 .

[15]  H. Ohashi,et al.  Effect of particle size on the diffusion behavior of some radionuclides in compacted bentonite , 1999 .

[16]  Prapote Boonsinsuk,et al.  Formulation of backfill material for a nuclear fuel waste disposal vault , 1986 .

[17]  R. Larsson,et al.  Wall friction coefficient estimation through modelling of powder die pressing experiment , 2000 .

[18]  B. Schöne,et al.  Friction measurements during dry compaction of silicon carbide , 1997 .

[19]  L. Börgesson.  WATER FLOW AND SWELLING PRESSURE IN NON-SATURATED BENTONITE-BASED CLAY BARRIERS , 1985 .

[20]  Micromechanical model for compaction characteristics of bentonite–sand mixtures , 2004 .

[21]  N. Stanley‐Wood,et al.  Enlargement and compaction of particulate solids , 1983 .

[22]  R. Nedderman.  Statics and Kinematics of Granular Materials: Euler's equation and rates of strain , 1992 .

[23]  B. Briscoe,et al.  Wall friction in the compaction of agglomerated ceramic powders , 1991 .