Optimized tapered dipole nanoantenna as efficient energy harvester.

In this paper, a novel design of tapered dipole nanoantenna is introduced and numerically analyzed for energy harvesting applications. The proposed design consists of three steps tapered dipole nanoantenna with rectangular shape. Full systematic analysis is carried out where the antenna impedance, return loss, harvesting efficiency and field confinement are calculated using 3D finite element frequency domain method (3D-FEFD). The structure geometrical parameters are optimized using particle swarm algorithm (PSO) to improve the harvesting efficiency and reduce the return loss at wavelength of 500 nm. A harvesting efficiency of 55.3% is achieved which is higher than that of conventional dipole counterpart by 29%. This enhancement is attributed to the high field confinement in the dipole gap as a result of multiple tips created in the nanoantenna design. Furthermore, the antenna input impedance is tuned to match a wide range of fabricated diode based upon the multi-resonance characteristic of the proposed structure.

[1]  Mohamed Farhat O. Hameed,et al.  Design of flower-shaped dipole nano-antenna for energy harvesting , 2014 .

[2]  M. Rajarajan,et al.  Characterisation of low-loss waveguide bends with offset-optimisation for compact photonic integrated circuits , 2000 .

[3]  Federico Capasso,et al.  Optical nanorod antennas as dispersive one-dimensional Fabry–Pérot resonators for surface plasmons , 2009 .

[4]  O. Martin,et al.  Engineering the optical response of plasmonic nanoantennas. , 2008, Optics express.

[5]  G. Moddel,et al.  Applicability of Metal/Insulator/Metal (MIM) Diodes to Solar Rectennas , 2011, IEEE Journal of Photovoltaics.

[6]  Atif Shamim,et al.  Design, Optimization and Fabrication of a 28.3 THz Nano-Rectenna for Infrared Detection and Rectification , 2014, Scientific Reports.

[7]  D. K. Kotter,et al.  Theory and Manufacturing Processes of Solar NanoAntenna Electromagnetic Collectors , 2010 .

[8]  K. Sarveswaran,et al.  Sub-10 nm electron beam lithography using cold development of poly(methylmethacrylate) , 2004 .

[9]  Amir Boag,et al.  Dual-Vivaldi wideband nanoantenna with high radiation efficiency over the infrared frequency band. , 2011, Optics letters.

[10]  G. Si,et al.  Plasmonic nanoantennae fabricated by focused Ion beam milling , 2015 .

[11]  Javier Alda,et al.  Conversion efficiency of broad-band rectennas for solar energy harvesting applications. , 2013, Optics express.

[12]  X. Letartre,et al.  Nanoantenna-induced fringe splitting of Fabry-Perot interferometer: a model study of plasmonic/photonic coupling. , 2015, Optics express.

[13]  M. Cryan,et al.  Analysis and design of a cross dipole nanoantenna for fluorescence-sensing applications , 2014 .

[14]  B M A Rahman,et al.  Numerical analysis of bent waveguides: bending loss, transmission loss, mode coupling, and polarization coupling. , 2008, Applied optics.

[15]  R. L. Bailey,et al.  A Proposed New Concept for a Solar-Energy Converter , 1972 .

[16]  G. Vandenbosch,et al.  Plasmonic Grid Array of Gold Nanorods for Point-to-Point Optical Communications , 2014, Journal of Lightwave Technology.

[17]  R. W. Christy,et al.  Optical Constants of the Noble Metals , 1972 .

[18]  Guy A. E. Vandenbosch,et al.  Optimal solar energy harvesting efficiency of nano-rectenna systems , 2013 .

[19]  Alexey Bezryadin,et al.  Fabrication of symmetric sub-5 nm nanopores using focused ion and electron beams , 2006 .

[20]  Mohamed Farhat O. Hameed,et al.  Dispersion Characteristics of Asymmetric Channel Plasmon Polariton Waveguides , 2014, IEEE Journal of Quantum Electronics.

[21]  Andrea Alù,et al.  Input impedance, nanocircuit loading, and radiation tuning of optical nanoantennas. , 2007, Physical review letters.

[22]  G. Vandenbosch,et al.  Upper bounds for the solar energy harvesting efficiency of nano-antennas , 2012 .