Novelty detection applied to vibration data from a CX-100 wind turbine blade under fatigue loading

The remarkable evolution of new generation wind turbines has led to a dramatic increase of wind turbine blade size. In turn, a reliable structural health monitoring (SHM) system will be a key factor for the successful implementation of such systems. Detection of damage at an early stage is a crucial issue as blade failure would be a catastrophic result for the entire wind turbine. In this study the SHM analysis will be based on experimental measurements of Frequency Response Functions (FRFs) extracted by using an input/output acquisition technique under a fatigue loading of a 9m CX-100 blade at the National Renewable Energy Laboratory (NREL) and National Wind Technology Center (NWTC) performed in the Los Alamos National Laboratory. The blade was harmonically excited at its first natural frequency using a Universal Resonant Excitation (UREX) system. For analysis, the Auto-Associative Neural Network (AANN) is a non-parametric method where a set of damage sensitive features gathered from the measured structure are used to train a network that acts as a novelty detector. This traditionally has a highly complex bottleneck structure with five layers in the AANN. In the current paper, a new attempt is also exploited based on an AANN with one hidden layer in order to reduce the theoretical and computational difficulties. Damage detection of composite bodies of blades is a grand challenge due to varying aerodynamic and gravitational loads and environmental conditions. A study of the noise tolerant capability of the AANN which is associated to its generalisation capacity is addressed. It will be shown that vibration response data combined with AANNs is a robust and powerful tool, offering novelty detection even when operational and environmental variations are present. The AANN is a method which has not yet been widely used in the structural health monitoring of composite blades.

[1]  Nasser M. Nasrabadi,et al.  Pattern Recognition and Machine Learning , 2006, Technometrics.

[2]  Keith Worden,et al.  STRUCTURAL FAULT DETECTION USING A NOVELTY MEASURE , 1997 .

[3]  Keith Worden,et al.  New trends in vibration based structural health monitoring , 2011 .

[4]  Nuno M. M. Maia,et al.  Theoretical and Experimental Modal Analysis , 1997 .

[5]  P. Filzmoser.  A MULTIVARIATE OUTLIER DETECTION METHOD , 2004 .

[6]  Nathalie Japkowicz,et al.  Nonlinear Autoassociation Is Not Equivalent to PCA , 2000, Neural Computation.

[7]  Keith Worden,et al.  EXPERIMENTAL VALIDATION OF A STRUCTURAL HEALTH MONITORING METHODOLOGY: PART II. NOVELTY DETECTION ON A GNAT AIRCRAFT , 2003 .

[8]  Lionel Tarassenko,et al.  Novelty detection for the identification of abnormalities , 2000, Int. J. Syst. Sci..

[9]  Ricardo Vigário,et al.  Nonlinear PCA: a new hierarchical approach , 2002, ESANN.

[10]  Keith Worden,et al.  DAMAGE DETECTION USING OUTLIER ANALYSIS , 2000 .

[11]  H. Bourlard,et al.  Auto-association by multilayer perceptrons and singular value decomposition , 1988, Biological Cybernetics.

[12]  Gyuhae Park,et al.  Full-scale fatigue tests of CX-100 wind turbine blades. Part II: analysis , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[13]  Christopher M. Bishop,et al.  Neural networks for pattern recognition , 1995 .

[14]  Keith Worden,et al.  Damage detection in carbon composite material typical of wind turbine blades using auto-associative neural networks , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[15]  Bryan Harris,et al.  Analysis and performance of fibre composites: By B. D. Agarwal & L. J. Broutman. John Wiley and Sons Inc., New York, 1990. Second edition, xviii + 449. ISBN 0-471-51152. Price £47.50 , 1991 .

[16]  M. Kramer.  Nonlinear principal component analysis using autoassociative neural networks , 1991 .

[17]  Keith Worden,et al.  EXPERIMENTAL VALIDATION OF A STRUCTURAL HEALTH MONITORING METHODOLOGY: PART I. NOVELTY DETECTION ON A LABORATORY STRUCTURE , 2003 .

[18]  Gyuhae Park,et al.  Full-scale fatigue tests of CX-100 wind turbine blades. Part I: testing , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.