CFD analysis on optimizing the annular fin parameters toward an improved storage response in a triple‐tube containment system

Due to the low thermal conductivity of the phase change material and low thermal diffusion inside the phase change material, this study seeks to improve the melting response of a triple‐tube latent heat storage system via employing annular fins by optimizing their structural parameters, including the fin number, location, and dimensions. Natural convection effects are numerically evaluated considering different numbers and the locations of the fins, including fin numbers of 4, 10, 16, 20, and 30 in a vertical system orientation. The fins are attached to the inner and outer sides of the annulus, accommodating the phase change material between the inner and center tubes. The fins' number and location are identical on both sides of the annulus, and the volume of the fins is the same across all scenarios evaluated. The results show that the higher the number of fins used, the greater the heat communication between the fins and the phase change material layers in charge, resulting in faster melting and a higher rate of heat storage. Due to the limited natural convection effect and lower heat diffusion at the heat exchanger's bottom, an additional fin is added, and its thickness is assessed. The results show that the case with equal fin thickness, that is, both original fins and the new fin, performs the best performance compared with that for the cases with an added fin with thicknesses of 0.5, 1, and 2 mm. Eliminating an extra fin from the base of the system for the case with 30 fins increases the charging time by 53.3%, and reduces the heat storage rate by 44%. The overall melting time for the case with an added fin to the bottom is 1549 s for the case with 30 fins which is 85.8%, 34.2%, 18%, and 8.8% faster than the cases with 4, 10, 16, and 20 fins, respectively. This study reveals that further attention should be given to the position and number of annular fins to optimize the melting mechanism in phase‐changing materials‐based heat storage systems.

[1]  J. Guerrero,et al.  An Optimization Strategy of Price and Conversion Factor Considering the Coupling of Electricity and Gas Based on Three-Stage Game , 2023, IEEE Transactions on Automation Science and Engineering.

[2]  Dongwei Zhang,et al.  Thermal performance analysis and optimization of melting process in a buried tube latent heat storage system , 2022, Journal of Energy Storage.

[3]  Shaorong Xie,et al.  Investigating the output performance of Triboelectric Nanogenerators with Single/Double-sided interlayer , 2022, Nano Energy.

[4]  Biao Zhang,et al.  A Pareto-based hybrid iterated greedy algorithm for energy-efficient scheduling of distributed hybrid flowshop , 2022, Expert Syst. Appl..

[5]  Qianjun Mao,et al.  Study on Heat Storage Performance of a Novel Vertical Shell and Multi-Finned Tube Tank , 2022, SSRN Electronic Journal.

[6]  Y. Shuai,et al.  Experimental study on thermal performance of a novel medium-high temperature packed-bed latent heat storage system containing binary nitrate , 2022, Applied Energy.

[7]  H. Mohammed.  Discharge improvement of a phase change material‐air‐based thermal energy storage unit for space heating applications using metal foams in the air sides , 2022, Heat Transfer.

[8]  M. He,et al.  Study on the suppression mechanism of (NH4)2CO3 and SiC for polyethylene deflagration based on flame propagation and experimental analysis , 2022, Powder Technology.

[9]  Xiaohu Yang,et al.  Compression effect of metal foam on melting phase change in a shell-and-tube unit , 2022, Applied Thermal Engineering.

[10]  Xiaohu Yang,et al.  Thermal assessment on solid-liquid energy storage tube packed with non-uniform angled fins , 2021, Solar Energy Materials and Solar Cells.

[11]  Xiaohu Yang,et al.  Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit , 2021, Solar Energy Materials and Solar Cells.

[12]  Guiqiang Li,et al.  Study on the influence of tank structure and fin configuration on heat transfer performance of phase change thermal storage system , 2021 .

[13]  Jinyue Yan,et al.  Melting assessment on the angled fin design for a novel latent heat thermal energy storage tube , 2021, Renewable Energy.

[14]  M. Altanji,et al.  Proposing novel “L” shaped fin to boost the melting performance of a vertical PCM enclosure , 2021, Case Studies in Thermal Engineering.

[15]  Akshaykumar N. Desai,et al.  Novel inverted fin configurations for enhancing the thermal performance of PCM based thermal control unit: A numerical study , 2021 .

[16]  Yongping Zheng,et al.  In Situ Chemical Lithiation Transforms Diamond‐Like Carbon into an Ultrastrong Ion Conductor for Dendrite‐Free Lithium‐Metal Anodes , 2021, Advanced materials.

[17]  Lei Zhang,et al.  Repetitive Mining Stress and Pore Pressure Effects on Permeability and Pore Pressure Sensitivity of Bituminous Coal , 2021, Natural Resources Research.

[18]  Gurpreet Singh Sodhi,et al.  Compound charging and discharging enhancement in multi-PCM system using non-uniform fin distribution , 2021 .

[19]  Fan Zhang,et al.  Recent Advances and Perspectives on the Polymer Electrolytes for Sodium/Potassium-Ion Batteries. , 2021, Small.

[20]  Yongbing Tang,et al.  K‐Ion Battery Cathode Design Utilizing Trigonal Prismatic Ligand Field , 2021, Advanced materials.

[21]  S. Yao,et al.  Study on solidification performance of PCM by longitudinal triangular fins in a triplex-tube thermal energy storage system , 2021, Energy.

[22]  Yongping Zheng,et al.  Novel lamellar tetrapotassium pyromellitic organic for robust high-capacity potassium storage. , 2021, Angewandte Chemie.

[23]  Xiang Qin,et al.  Performance Evaluation and Enhancement of Cascaded Latent Heat Storage System Using Multiple Phase Change Materials and Uneven Fins , 2020 .

[24]  H. Mohammed,et al.  Numerical study of circular-elliptical double-pipe thermal energy storage systems , 2020 .

[25]  M. Ghalambaz,et al.  Forced convection heat transfer of Nano-Encapsulated Phase Change Material (NEPCM) suspension in a mini-channel heatsink , 2020 .

[26]  Yamei Zhang,et al.  Thermal energy storage performance of a three-PCM cascade tank in a high-temperature packed bed system , 2020 .

[27]  M. Ghalambaz,et al.  Melting heat transfer of power-law non-Newtonian phase change nano-enhanced n-octadecane-mesoporous silica (MPSiO2) , 2020 .

[28]  M. Gillott,et al.  Discharge of a composite metal foam/phase change material to air heat exchanger for a domestic thermal storage unit , 2020, Renewable Energy.

[29]  M. Ghalambaz,et al.  Unsteady natural convection flow of a suspension comprising Nano-Encapsulated Phase Change Materials (NEPCMs) in a porous medium , 2020 .

[30]  A. Shahsavar,et al.  Thermal performance evaluation of non-uniform fin array in a finned double-pipe latent heat storage system , 2020 .

[31]  A. Shahsavar,et al.  An experimental investigation on the rheological behavior of nanofluids made by suspending multi-walled carbon nanotubes in liquid paraffin , 2020 .

[32]  M. Ghalambaz,et al.  Analysis of melting behavior of PCMs in a cavity subject to a non-uniform magnetic field using a moving grid technique , 2020, Applied Mathematical Modelling.

[33]  Emmanuel C. Nsofor,et al.  Solidification enhancement with multiple PCMs, cascaded metal foam and nanoparticles in the shell-and-tube energy storage system , 2020 .

[34]  M. Gillott,et al.  Numerical modelling of phase change material melting process embedded in porous media: Effect of heat storage size , 2020, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy.

[35]  M. Gillott,et al.  Numerical study of a multiple-segment metal foam-PCM latent heat storage unit: Effect of porosity, pore density and location of heat source , 2019, Energy.

[36]  Wei-Biao Ye,et al.  Effect of aspect ratio on saturated boiling flow in microchannels with nonuniform heat flux , 2019, Heat Transfer-Asian Research.

[37]  Wei-Biao Ye,et al.  Numerical investigation of hydrodynamic and heat transfer performances of nanofluids in a fractal microchannel heat sink , 2019, Heat Transfer-Asian Research.

[38]  Amin Shahsavar,et al.  Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM , 2019, Energy Conversion and Management.

[39]  Orhan Aydin,et al.  Combined effects of inclination angle and fin number on thermal performance of a PCM-based heat sink , 2019, Applied Thermal Engineering.

[40]  Emmanuel C. Nsofor,et al.  Hybrid heat transfer enhancement for latent-heat thermal energy storage systems: A review , 2019, International Journal of Heat and Mass Transfer.

[41]  M. Afrand,et al.  Studies on optimum fins number in PCM-based heat sinks , 2019, Energy.

[42]  L. Cabeza,et al.  Experimental evaluation of the use of fins and metal wool as heat transfer enhancement techniques in a latent heat thermal energy storage system , 2019, Energy Conversion and Management.

[43]  Emmanuel C. Nsofor,et al.  Solidification enhancement of PCM in a triplex-tube thermal energy storage system with nanoparticles and fins , 2018 .

[44]  Ali J. Chamkha,et al.  Melting of nanoparticles-enhanced phase-change materials in an enclosure: Effect of hybrid nanoparticles , 2017 .

[45]  Atta Sojoudi,et al.  Effects of different parameters on the discharging of double-layer PCM through the porous channel , 2017 .

[46]  Davood Domiri Ganji,et al.  Multi-objective RSM optimization of fin assisted latent heat thermal energy storage system based on solidification process of phase change Material in presence of copper nanoparticles , 2017 .

[47]  Ya-Ling He,et al.  Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media , 2017 .

[48]  Emmanuel C. Nsofor,et al.  Melting enhancement in triplex-tube latent heat energy storage system using nanoparticles-metal foam combination , 2017 .

[49]  Ali J. Chamkha,et al.  Phase-change heat transfer of single/hybrid nanoparticles-enhanced phase-change materials over a heated horizontal cylinder confined in a square cavity , 2017 .

[50]  C. Veerakumar,et al.  Phase change material based cold thermal energy storage: Materials, techniques and applications – A review , 2016 .

[51]  Fan Zhang,et al.  A Novel Aluminum–Graphite Dual‐Ion Battery , 2016 .

[52]  Peilun Wang,et al.  Numerical investigation of PCM melting process in sleeve tube with internal fins , 2016 .

[53]  R. Bahrampoury,et al.  Experimental and numerical evaluation of longitudinally finned latent heat thermal storage systems , 2015 .

[54]  Xiang Wang,et al.  Thermal energy charging behaviour of a heat exchange device with a zigzag plate configuration containing multi-phase-change-materials (m-PCMs) , 2015 .

[55]  Angui Li,et al.  Enhanced heat transfer for PCM melting in the frustum-shaped unit with multiple PCMs , 2015, Journal of Thermal Analysis and Calorimetry.

[56]  Amir Faghri,et al.  Simulation of heat pipe-assisted latent heat thermal energy storage with simultaneous charging and discharging , 2015 .

[57]  F. Bruno,et al.  Experimental investigation of the effect of inclination angle on convection-driven melting of phase change material in a rectangular enclosure , 2014 .

[58]  Kamaruzzaman Sopian,et al.  Enhance heat transfer for PCM melting in triplex tube with internal-external fins , 2013 .

[59]  K. Sopian,et al.  Internal and external fin heat transfer enhancement technique for latent heat thermal energy storage in triplex tube heat exchangers , 2013 .

[60]  M. Rosen,et al.  Analytical modeling of PCM solidification in a shell and tube finned thermal storage for air conditioning systems , 2012 .

[61]  Wei-Biao Ye,et al.  Numerical simulation on phase-change thermal storage/release in a plate-fin unit , 2011 .

[62]  J. Khodadadi,et al.  NUMERICAL SIMULATION OF SOLIDIFICATION OF NANOPARTICLE-ENHANCED PHASE CHANGE MATERIALS (NEPCM) CONSIDERING TRANSPORT OF SUSPENSIONS , 2011 .

[63]  Mervyn Smyth,et al.  A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins , 2009 .

[64]  Gennady Ziskind,et al.  Numerical and experimental study of melting in a spherical shell , 2007 .

[65]  Ming Fang,et al.  Effects of different multiple PCMs on the performance of a latent thermal energy storage system , 2007 .

[66]  K. Ismail,et al.  Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder , 2001 .