Electrical and thermal computation of stress grading system in inverter-driven medium voltage motors
暂无分享,去创建一个
[2] A. Roberts,et al. Stress grading for high voltage motor and generator coils , 1995 .
[3] E. Sharifi,et al. Temperature and electric field dependence of stress grading on form-wound motor coils , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.
[4] J.C.G. Wheeler,et al. Thermal performance of stress grading systems for converter-fed motors , 2007, IEEE Electrical Insulation Magazine.
[5] E Sharifi,et al. Analysis of thermal stresses in medium-voltage motor coils under repetitive fast pulse and high-frequency voltages , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.
[6] S. Jayaram,et al. Effectiveness of stress grading coatings on form wound stator coil groundwall insulation under fast rise time pulse voltages , 2005, IEEE Transactions on Energy Conversion.
[7] F.P. Espino-Cortes,et al. Impact of inverter drives employing fast-switching devices on form-wound AC machine stator coil stress grading , 2007, IEEE Electrical Insulation Magazine.
[8] J.C.G. Wheeler,et al. Effects of converter pulses on the electrical insulation in low and medium voltage motors , 2005, IEEE Electrical Insulation Magazine.
[9] A. Kumada,et al. The potential distribution measurement on the stress grading system of high-voltage rotating machines by using pockels effect , 2012, 2012 Annual Report Conference on Electrical Insulation and Dielectric Phenomena.
[10] P. Gomez,et al. Modeling of heat generated on stress grading coatings of motors fed by multilevel drives , 2011, IEEE Transactions on Dielectrics and Electrical Insulation.
[11] Youguang Guo,et al. Performance and cost comparison of NPC, FC and SCHB multilevel converter topologies for high-voltage applications , 2011, 2011 International Conference on Electrical Machines and Systems.
[12] R. Omranipour,et al. IEC qualification test applied to capacitively graded 13.8 kV bar samples energized with repetitive fast pulses , 2011, 2011 Electrical Insulation Conference (EIC)..
[13] Frank Jenau,et al. Comparison of transient time-domain and harmonic quasi-static solution of electrical and thermal coupled numerical stress grading calculations for large rotating machines , 2012, 2012 IEEE International Symposium on Electrical Insulation.
[15] W. Tao,et al. Study on General Governing Equations of Computational Heat Transfer and Fluid Flow , 2012 .
[17] L Donzel,et al. Nonlinear resistive electric field grading Part 2: Materials and applications , 2011, IEEE Electrical Insulation Magazine.
[18] W. Chen,et al. Stator insulation system evaluation and improvement for medium voltage adjustable speed drive applications , 2008, 2008 55th IEEE Petroleum and Chemical Industry Technical Conference.
[19] J. Luukko,et al. Modulation technique for series-connected h-bridge multilevel converters with equal load sharing , 2009 .
[20] Baoming Ge,et al. Medium-Voltage Multilevel Converters—State of the Art, Challenges, and Requirements in Industrial Applications , 2010, IEEE Transactions on Industrial Electronics.
[21] Martin Hettegger,et al. Identifying the heat transfer coefficients on the end-windings of an electrical machine by measurements and simulations , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.
[22] J.C.G. Wheeler,et al. Novel stress grading systems for converter-fed motors , 2007, IEEE Electrical Insulation Magazine.
[23] J.C.G. Wheeler,et al. Finite element modelling of nonlinear stress grading materials for machine end windings , 2002 .
[24] F. Jenau,et al. Particle swarm based simplex optimization implemented in a nonlinear, multiple-coupled finite-element-model for stress grading in generator end windings , 2012, 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM).