Comparison of criteria for prediction of runaway reactions in the sulphuric acid catalyzed esterification of acetic anhydride and methanol

Abstract Loss of temperature control is one of the major reasons that can lead to runaway reaction. This occurrence is commonly named thermal runway. The aim of this paper is the application of thermal runaway criteria in order to predict the onset of runaway phenomena and define the range of stability related to operating conditions in the reactor, with specific reference to the esterification of acetic anhydride and methanol catalysed by sulphuric acid tested in isoperibolic conditions. The isoperibolic calorimeter has also been used to obtain thermodynamic, kinetic and physical chemistry data necessary to develop a model for the reaction. Some runaway criteria applied in this work require a model for the process, so a model for the analyzed system been developed. Because of the modest reaction enthalpy and low activation energy this reacting system provide a severe test to the runaway criteria. In this work, various runaway criteria have been applied to the experimental and simulated data and the results obtained have been compared.

[1]  Claudio Ampelli,et al.  Calorimetric study of the inhibition of runaway reactions during methylmethacrylate polymerization processes , 2006 .

[2]  Fernanda Strozzi,et al.  On-Line Runaway Detection in Batch Reactors Using Chaos Theory Techniques. , 1999 .

[3]  P. C. Bowes,et al.  Self-Heating: Evaluating and Controlling the Hazards , 1984 .

[4]  Fernanda Strozzi,et al.  A general method for assessing the thermal stability of batch chemical reactors by sensitivity calculation based on Lyapunov exponents , 1994 .

[5]  Giuseppe Maschio,et al.  A general criterion to define runaway limits in chemical reactors , 2003 .

[6]  Joseph P. Zbilut,et al.  On-line runaway detection in isoperibolic batch and semibatch reactors using the divergence criterion , 2004, Comput. Chem. Eng..

[7]  Philip F. Nolan,et al.  Some lessons from thermal-runaway incidents , 1987 .

[8]  Yijun Liu,et al.  A comparison of the esterification of acetic acid with methanol using heterogeneous versus homogeneous acid catalysis , 2006 .

[9]  Joseph P. Zbilut,et al.  Early warning detection of runaway initiation using non-linear approaches , 2005 .

[10]  Jürgen Gmehling,et al.  Reaction Kinetics and Chemical Equilibrium of Homogeneously and Heterogeneously Catalyzed Acetic Acid Esterification with Methanol and Methyl Acetate Hydrolysis , 2000 .

[11]  G. Maschio,et al.  On-line Calibration and Determination of the Heat of Reaction for Laboratory Scale Heat Transfer Calorimeters , 2001 .

[12]  L. Hub,et al.  Early on‐line detection of exothermic reactions , 1986 .

[13]  Hua Wu,et al.  Parametric sensitivity in chemical systems , 1999 .

[14]  Eugeniusz Molga,et al.  No more runaways in fine chemical reactors , 2004 .

[15]  G. Maschio,et al.  Reaction Inhibition as a Method for Preventing Thermal Runaway in Industrial Processes , 2007 .

[16]  G. Froment,et al.  Parametric sensitivity and runaway in fixed bed catalytic reactors , 1970 .

[17]  P. F. Nolan,et al.  Review of the selection and design of mitigation systems for runaway chemical reactions , 2001 .

[18]  D. D. Perlmutter.  Stability of chemical reactors , 1972 .

[19]  Jerry March,et al.  Advanced Organic Chemistry: Reactions, Mechanisms, and Structure , 1977 .

[20]  Renato Rota,et al.  Thermally safe operation of liquid–liquid semibatch reactors Part II: Single diffusion controlled reactions with arbitrary reaction order , 2005 .

[21]  Heikki Haario,et al.  Development of a kinetic model for the esterification of acetic acid with methanol in the presence of a homogeneous acid catalyst , 1997 .

[22]  Jasbir Singh,et al.  Design of quench system for runaway reactions using bench‐scale equipment , 1991 .

[23]  J. Adler,et al.  The critical conditions in thermal explosion theory with reactant consumption , 1964 .

[24]  Fitting isoperibolic calorimeter data for reactions with pseudo-first order chemical kinetics , 2005 .

[25]  Eugeniusz Molga,et al.  Safety and Runaway Prevention in Batch and Semibatch Reactors—A Review , 2006 .

[26]  Yih-Shing Duh,et al.  Applications of reaction calorimetry in reaction kinetics and thermal hazard evaluation , 1996 .