Lasing and thermal characteristics of Yb:YAG/YAG composite with atomic diffusion bonding

We demonstrated the laser performance of an Yb:YAG/YAG composite ceramic laser medium mounted on an aluminium heatsink via atomic diffusion bonding (ADB) technique using nanocrystalline metal films at room temperature in air. The surface temperature rise of the ADB bonded laser medium was linear with 57 °C lower than that of the commercially available soldered Yb:YAG thin disk at the pump power of 280 W. Moreover, the ADB disk was pumped 1.5 times higher (7.3 kW cm−2) than the typical damage threshold of the soldered disk without any sign of damage. The undoped capping may be effective for the suppression of ASE heating; however, according to the in situ OPD measurement it induces strong thermal lensing. The CW laser output power of 177 W was obtained at the pump power of 450 W with the optical-to-optical efficiency of 40% using V-shape cavity.

[1]  Dmitrii Kouznetsov,et al.  Role of undoped cap in the scaling of thin-disk lasers , 2008 .

[2]  N. Vretenar,et al.  Thermal and stress characterization of various thin disk laser configurations at room temperature , 2011, LASE.

[3]  Kin Seng Lai,et al.  Near fundamental mode 1.1 kW Yb:YAG thin-disk laser. , 2013, Optics letters.

[4]  A Gavrielides,et al.  ASE in thin disk lasers: theory and experiment. , 2011, Optics express.

[5]  P. Nickles,et al.  High-repetition-rate chirped-pulse-amplification thin-disk laser system with joule-level pulse energy. , 2009, Optics letters.

[6]  O. Palashov,et al.  Fabrication of composite laser elements by a new thermal diffusion bonding method , 2014 .

[7]  A. Sugiyama,et al.  Direct Bonding of Ti:sapphire laser Crystals. , 1998, Applied optics.

[8]  A. Giesen,et al.  Fifteen Years of Work on Thin-Disk Lasers: Results and Scaling Laws , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[9]  M. Gabalis,et al.  Aberrations induced by anti-ASE cap on thin-disk active element. , 2013, Optics express.

[10]  M. Tilleman Analysis of thermal effects in laser materials, 2: Disk and slab geometry , 2011 .

[11]  Huai-Chuan Lee,et al.  Diffusion-bonded composites of YAG single crystals , 1992, Laser Damage.

[12]  Ken-ichi Ueda,et al.  The physical properties of composite YAG ceramics , 2005 .

[13]  Miyuki Uomoto,et al.  (Invited) Room Temperature Bonding of Wafers with Thin Nanocrystalline Metal Films , 2010 .

[14]  Taisuke Miura,et al.  Suppression of nonlinear phonon relaxation in Yb:YAG thin disk via zero phonon line pumping. , 2014, Optics letters.

[15]  M. Uomoto,et al.  Atomic diffusion bonding of wafers with thin nanocrystalline metal films , 2010 .

[16]  Nicholas G. Traggis,et al.  Improved bond strength characterization of chemically activated direct bonding (CADB) epoxy-free bonded solid state laser materials , 2010, LASE.