Numerical Study of Solidification in a Plate Heat Exchange Device with a Zigzag Configuration Containing Multiple Phase-Change-Materials
暂无分享,去创建一个
[1] Kamaruzzaman Sopian,et al. Experimental study of melting and solidification of PCM in a triplex tube heat exchanger with fins , 2014 .
[2] T. L. Bergman,et al. Enhancement of latent heat energy storage using embedded heat pipes , 2011 .
[3] A. Mujumdar,et al. Cyclic heat transfer in a novel storage unit of multiple phase change materials , 1996 .
[4] Per Heiselberg,et al. Review of thermal energy storage technologies based on PCM application in buildings , 2013 .
[5] Arun S. Mujumdar,et al. Enhancement of energy charge-discharge rates in composite slabs of different phase change materials , 1996 .
[6] Marc A. Rosen,et al. Thermal performance of a multiple PCM thermal storage unit for free cooling , 2013 .
[7] Yulong Ding,et al. Carbonate-salt-based composite materials for medium- and high-temperature thermal energy storage , 2014 .
[8] Mousa Farhadi,et al. Numerical study of melting inside concentric and eccentric horizontal annulus , 2012 .
[9] José Antonio Almendros-Ibáñez,et al. A numerical study of external building walls containing phase change materials (PCM). , 2012 .
[10] R. Velraj,et al. Heat transfer and pressure drop studies on a PCM-heat exchanger module for free cooling applications , 2011 .
[11] Arun S. Mujumdar,et al. Transient cooling of electronics using phase change material (PCM)-based heat sinks , 2008 .
[12] K. Ismail,et al. Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder , 2001 .
[13] El Khadir Lakhal,et al. Computation of melting with natural convection inside a rectangular enclosure heated by discrete protruding heat sources , 2013 .
[14] Arun S. Mujumdar,et al. Improved design for heat transfer performance of a novel phase change material (PCM) thermal energy storage (TES) , 2013 .
[15] K. Ismail,et al. Solidification of PCM around a curved tube , 2012 .
[16] Kihyung Lee,et al. Improved heat storage rate for an automobile coolant waste heat recovery system using phase-change material in a fin–tube heat exchanger , 2014 .
[17] Xiang Wang,et al. Thermal energy charging behaviour of a heat exchange device with a zigzag plate configuration containing multi-phase-change-materials (m-PCMs) , 2015 .
[18] Ya-Ling He,et al. Numerical study on performance of molten salt phase change thermal energy storage system with enhanced tubes , 2012 .
[19] K. Ismail,et al. Fins and turbulence promoters for heat transfer enhancement in latent heat storage systems , 2011 .
[20] Xiaosong Zhang,et al. Thermal performance of a solar storage packed bed using spherical capsules filled with PCM having different melting points , 2014 .
[21] W. Tao,et al. Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin , 2012 .
[22] R. Pitchumani,et al. Analysis and optimization of a latent thermal energy storage system with embedded heat pipes , 2011 .
[23] Nirmal-Kumar C. Nair,et al. Impact of Energy Storage in Buildings on Electricity Demand Side Management , 2011, Thermal Energy Storage with Phase Change Materials.
[24] K. Sopian,et al. Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins , 2013 .
[25] Yue-Tzu Yang,et al. Three-dimensional transient cooling simulations of a portable electronic device using PCM (phase change materials) in multi-fin heat sink , 2011 .
[26] K. Kaygusuz,et al. Thermal Energy Storage Behavior of CaCl2.6H2O during Melting and Solidification , 2008 .
[27] R. Seeniraj,et al. Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs , 2008 .
[28] Neil Hewitt,et al. The development of a finned phase change material (PCM) storage system to take advantage of off-peak electricity tariff for improvement in cost of heat pump operation , 2010 .
[29] S. Kalaiselvam,et al. Energy conservative air conditioning system using silver nano-based PCM thermal storage for modern buildings , 2014 .
[30] Feasibility of an Advanced Waste Heat Transportation System Using High-temperature Phase Change Material (PCM) , 2010 .
[31] Adriano Sciacovelli,et al. Numerical analysis of a medium scale latent energy storage unit for district heating systems , 2012 .