Comparative performance evaluation of synchronous reluctance machine with outer rotor versus inner rotor

The paper presents the comparative analysis of the performances between Synchronous Reluctance Machine with Inner Rotor and the new topology of Outer Rotor Synchronous Reluctance Machine, both represent a potential candidate for a wide industrial application. The investigation has been made from point of view of mechanical performances (torque value and ripple content), electrical (efficiency, power factor) and active part weight. The analysis of the studied machines will be made numerically using a specialized software (Flux 2D).

[1]  Chenglin Gu,et al.  Design and optimization of external-rotor torque motor , 2009, 2009 International Conference on Electrical Machines and Systems.

[2]  Hossein Azizi Moghaddam,et al.  Design Optimization of Transversely Laminated Synchronous Reluctance Machine for Flywheel Energy Storage System Using Response Surface Methodology , 2017, IEEE Transactions on Industrial Electronics.

[3]  Z. Q. Zhu,et al.  Comparison of partitioned stator switched flux permanent magnet machines having single- and double-layer windings , 2015, 2015 Tenth International Conference on Ecological Vehicles and Renewable Energies (EVER).

[4]  Massimo Barcaro,et al.  Permanent-Magnet Optimization in Permanent-Magnet-Assisted Synchronous Reluctance Motor for a Wide Constant-Power Speed Range , 2012, IEEE Transactions on Industrial Electronics.

[5]  N. Bianchi,et al.  Rotor Flux-Barrier Design for Torque Ripple Reduction in Synchronous Reluctance and PM-Assisted Synchronous Reluctance Motors , 2009, IEEE Transactions on Industry Applications.

[6]  P. Torino,et al.  Automatic Design of Synchronous Reluctance Motors focusing on Barrier Shape Optimization , .

[7]  Reza Rajabi Moghaddam,et al.  Novel High-Performance SynRM Design Method: An Easy Approach for A Complicated Rotor Topology , 2014, IEEE Transactions on Industrial Electronics.

[8]  Maarten J. Kamper,et al.  Weighted Factor Multiobjective Design Optimization of a Reluctance Synchronous Machine , 2016, IEEE Transactions on Industry Applications.

[9]  Hamid A. Toliyat,et al.  Comparison of outer rotor permanent magnet and magnet-less generators for direct-drive wind turbine applications , 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).

[10]  Libing Zhou,et al.  Design And Rotor Geometry Analysis Of Permanent Magnet–Assisted Synchronous Reluctance Machines Using Ferrite Magnet , 2015 .

[11]  Reza Rajabi Moghaddam.  Synchronous Reluctance Machine (SynRM) Design , 2007 .

[12]  Torbjörn Thiringer,et al.  Investigation of pole number selection in a synchronous reluctance generator for wind applications , 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC).

[13]  Florin Nicolae Jurca,et al.  A novel synchronous reluctance motor with outer rotor for an electric bike , 2016, 2016 International Conference and Exposition on Electrical and Power Engineering (EPE).

[14]  Z. Q. Zhu,et al.  Optimal slot/pole and flux-barrier layer number combinations for synchronous reluctance machines , 2013, 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER).

[15]  Yan Li,et al.  Numerical Study on the Performance Effect of Solidity on the Straight-Bladed Vertical Axis Wind Turbine , 2010, 2010 Asia-Pacific Power and Energy Engineering Conference.

[16]  N.C. Kar,et al.  Saturation Modeling and Stability Analysis of Synchronous Reluctance Generator , 2008, IEEE Transactions on Energy Conversion.