Stabilized zirconia as a structural ceramic: an overview.
暂无分享,去创建一个
[1] B. Calès,et al. Long-term in vivo and in vitro aging of a zirconia ceramic used in orthopaedy. , 1994, Journal of biomedical materials research.
[2] Dae‐Joon Kim,et al. Effect of Ta2O5, Nb2O5, and HfO2 Alloying on the Transformability of Y2O3-Stabilized Tetragonal ZrO2 , 1990 .
[3] H. G. Scott,et al. Phase relationships in the zirconia-yttria system , 1975 .
[4] T. Gupta,et al. Effect of stress-induced phase transformation on the properties of polycrystalline zirconia containing metastable tetragonal phase , 1978 .
[5] Anthony G. Evans,et al. REVIEW—Transformation Toughening in Ceramics: Martensitic Transformations in Crack‐Tip Stress Fields , 1980 .
[6] A. Heuer,et al. Mechanisms of Toughening Partially Stabilized Zirconia (PSZ) , 1977 .
[7] Tsugio Sato,et al. Crystalline Phase Change in Yttria‐Partially‐Stabilized Zirconia by Low‐Temperature Annealing , 1984 .
[8] D. Marshall. Strength Characteristics of Transformation‐Toughened Zirconia , 1986 .
[9] J. Chevalier,et al. Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia. , 2006, Biomaterials.
[10] Sukhvinder P.S. Badwal,et al. Science and Technology of Zirconia V , 1993 .
[11] S. Lawson. Environmental degradation of zirconia ceramics , 1995 .
[12] M. Readey,et al. Effect of Heat Treatment on Grain Size, Phase Assemblage, and Mechanical Properties of 3 mol% Y‐TZP , 1996 .
[13] Gary L. Messing,et al. Ceramic Processing Science , 2006 .
[14] M. Mayo,et al. Fracture toughness of nanocrystalline tetragonal zirconia with low yttria content , 2002 .
[15] R. Dauskardt,et al. Cyclic Fatigue Life and Crack-Growth Behavior of Microstructurally Small Cracks in Magnesia-Partially-Stabilized Zirconia Ceramics , 1990 .
[16] K. Kobayashi,et al. Phase change and mechanical properties of ZrO2-Y2O3 solid electrolyte after ageing , 1981 .
[17] A. J. Burggraaf,et al. Mechanical properties of ultra-fine grained zirconia ceramics , 1992, Journal of Materials Science.
[18] Michael V. Swain,et al. Limitation of Maximum Strength of Zirconia‐Toughened Ceramics by Transformation Toughening Increment , 1985 .
[19] R. Ritchie,et al. Cyclic Fatigue‐Crack Propagation in Magnesia‐Partially‐Stabilized Zirconia Ceramics , 1990 .
[20] W. Jillek,et al. Sub-critical crack extension and crack resistance in polycrystalline alumina , 1977 .
[21] Masahiko Shimada,et al. Transformation of Yttria‐Doped Tetragonal ZrO2 Polycrystals by Annealing in Water , 1985 .
[22] R. Steinbrech,et al. Increase of crack resistance during slow crack growth in Al2O3 bend specimens , 1983 .
[23] P. Nicholson,et al. Structure and Thermomechanical Properties of Partially Stabilized Zirconia in the CaO‐ZrO2 System , 1972 .
[24] I. Chen,et al. Fatigue of Yttria-Stabilized Zirconia: II, Crack Propagation, Fatigue Striations, and Short-Crack Behavior , 1991 .
[25] C. Montross. Comparison of Bulk Properties of Mg‐PSZ with Temperature–Time Contour Diagrams , 1993 .
[26] Dae‐Joon Kim,et al. Effect of Ta 2 O 5 , Nb 2 O 5 , and HfO 2 Alloying on the Transformability of Y 2 O 3 -Stabilized Tetragonal ZrO 2 , 1990 .
[27] H. Schubert. Anisotropic Thermal Expansion Coefficients of Y2O3‐Stabilized Tetragonal Zirconia , 1986 .
[28] C. A. Paskocimas,et al. On the stabilizing behavior of zirconia: A Combined experimental and theoretical study , 2004 .
[29] L. Rose,et al. Strength Limitations of Transformation-Toughened Zirconia Alloys , 1986 .
[30] E. C. Subbarao,et al. Zirconia - an overview , 1981 .
[31] R. Hannink,et al. Precipitation During Controlled Cooling of Magnesia‐Partially‐Stabilized Zirconia , 1986 .
[32] Patrick M. Kelly,et al. Transformation Toughening in Zirconia‐Containing Ceramics , 2004 .
[33] A. Evans,et al. Transformation Toughening: An Overview , 1986 .
[34] M. R. James,et al. Reversible Stress‐Induced Martensitic Transformation in ZrO2 , 1986 .
[35] J. Chevalier,et al. Critical effect of cubic phase on aging in 3mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis. , 2004, Biomaterials.
[36] Arthur H. Heuer,et al. Transformation Toughening in ZrO2‐Containing Ceramics , 1987 .
[37] M. Swain,et al. KR‐Curve Behavior of Duplex Ceramics , 1991 .
[38] R. Hannink. Microstructural development of sub-eutectoid aged MgO-ZrO2 alloys , 1983 .
[39] J. Chevalier,et al. Low‐Temperature Aging of Y‐TZP Ceramics , 2004 .
[40] R. T. Pascoe,et al. Ceramic steel? , 1975, Nature.
[41] K. Clausen,et al. Defect structure of yttria-stabilized zirconia and its influence on the ionic conductivity at elevated temperatures , 1999 .
[42] Koji Matsui,et al. Cubic‐Formation and Grain‐Growth Mechanisms in Tetragonal Zirconia Polycrystal , 2003 .
[43] A. Heuer,et al. Stability of Tetragonal ZrO2 Particles in Ceramic Matrices , 1982 .
[44] Frederick F. Lange,et al. Degradation During Aging of Transformation‐Toughened ZrO2‐Y2O3 Materials at 250°C , 1986 .
[45] Arthur H. Heuer,et al. Science and Technology of Zirconia , 1981 .
[46] J. Chevalier,et al. What future for zirconia as a biomaterial? , 2006, Biomaterials.
[47] Michael V. Swain,et al. Grain‐Size‐Dependent Transformation Behavior in Polycrystalline Tetragonal Zirconia , 1992 .
[48] M. Finnis,et al. A stabilization mechanism of zirconia based on oxygen vacancies only , 2002, cond-mat/0206080.
[49] Tsugio Sato,et al. Transformation of yttria partially stabilized zirconia by low temperature annealing in air , 1985 .
[50] Xin Guo,et al. On the degradation of zirconia ceramics during low-temperature annealing in water or water vapor , 1999 .
[51] Tapan K. Gupta,et al. Stabilization of tetragonal phase in polycrystalline zirconia , 1977 .
[52] A. Evans. Perspective on the Development of High-Toughness Ceramics , 1990 .
[53] M. Swain,et al. Relationship between Fracture. Toughness and Phase Assemblage in Mg‐PSZ , 1994 .
[54] G. Sjögren,et al. Fracture resistance of all-ceramic zirconia bridges with differing phase stabilizers and quality of sintering. , 2006, Dental materials : official publication of the Academy of Dental Materials.