Light olefins from HDPE cracking in a two-step thermal and catalytic process

[1]  J. M. Arandes,et al.  Design factors of conical spouted beds and jet spouted beds , 1993 .

[2]  Javier Bilbao,et al.  Stability and hydrodynamics of conical spouted beds with binary mixtures , 1993 .

[3]  Javier Bilbao,et al.  Segregation in conical spouted beds with binary and ternary mixtures of equidensity spherical particles , 1994 .

[4]  Angela N. García,et al.  Pyrolysis of Polyethylene in a Fluidized Bed Reactor , 1994 .

[5]  W. Haag.  Catalysis by Zeolites – Science and Technology , 1994 .

[6]  Correlation for calculation of the gas dispersion coefficient in conical spouted beds , 1995 .

[7]  J. Bilbao,et al.  Catalyst Equilibration for Transformation of Methanol into Hydrocarbons by Reaction−Regeneration Cycles , 1996 .

[8]  Paul N. Sharratt,et al.  Investigation of the Catalytic Pyrolysis of High-Density Polyethylene over a HZSM-5 Catalyst in a Laboratory Fluidized-Bed Reactor , 1997 .

[9]  A. Corma,et al.  Current views on the mechanism of catalytic cracking , 2000 .

[10]  J. M. Arandes,et al.  Effect of HZSM-5 Zeolite Addition to a Fluid Catalytic Cracking Catalyst. Study in a Laboratory Reactor Operating under Industrial Conditions , 2000 .

[11]  W. Kaminsky,et al.  Pyrolysis of mixed polyolefins in a fluidised-bed reactor and on a pyro-GC/MS to yield aliphatic waxes , 2000 .

[12]  P. Magnoux,et al.  Organic chemistry of coke formation , 2001 .

[13]  Paul T. Williams,et al.  Catalytic pyrolysis of polyethylene , 2002 .

[14]  J. Ceamanos,et al.  Modeling of the Pyrolysis of Large Samples of Polyethylene Including the Melting Process , 2002 .

[15]  Yusaku Sakata,et al.  Basic study on a continuous flow reactor for thermal degradation of polymers , 2002 .

[16]  Roberto Aguado,et al.  Kinetics of polystyrene pyrolysis in a conical spouted bed reactor , 2003 .

[17]  J. Bilbao,et al.  Design of Conical Spouted Beds for the Handling of Low-Density Solids , 2004 .

[18]  M. Mastellone,et al.  Bed defluidisation during the fluidised bed pyrolysis of plastic waste mixtures , 2004 .

[19]  W. Kaminsky,et al.  Feedstock recycling of polymers by pyrolysis in a fluidised bed , 2004 .

[20]  A. J. Agulló,et al.  Effect of Residence Time on Volatile Products Obtained in the HDPE Pyrolysis in the Presence and Absence of HZSM-5 , 2006 .

[21]  J. Ceamanos,et al.  Catalytic degradation of high density polyethylene over nanocrystalline HZSM-5 zeolite , 2006 .

[22]  Javier Bilbao,et al.  Catalytic pyrolysis of high density polyethylene in a conical spouted bed reactor , 2007 .

[23]  G. San Miguel,et al.  Feedstock recycling of polyethylene in a two-step thermo-catalytic reaction system , 2007 .

[24]  Javier Bilbao,et al.  Catalytic Cracking of Waxes Produced by the Fast Pyrolysis of Polyolefins , 2007 .

[25]  J. Ceamanos,et al.  Modelling of the pyrolysis of high density polyethylene: Product distribution in a fluidized bed reactor , 2007 .

[26]  J. M. Arandes,et al.  Effect of catalyst properties on the cracking of polypropylene pyrolysis waxes under FCC conditions , 2008 .

[27]  Martin Kumar Patel,et al.  Steam cracking and methane to olefins: Energy use, CO2 emissions and production costs , 2008 .

[28]  M. Yang,et al.  Tertiary recycling of polyethylene waste by fluidised-bed reactions in the presence of various cracking catalysts , 2008 .

[29]  D. Serrano,et al.  Fuels from Waste Plastics by Thermal and Catalytic Processes: A Review , 2008 .

[30]  J. Baeyens,et al.  Recycling and recovery routes of plastic solid waste (PSW): a review. , 2009, Waste management.

[31]  G. S. Miguel,et al.  Valorization of Waste Agricultural Polyethylene Film by Sequential Pyrolysis and Catalytic Reforming , 2009 .

[32]  G. Lopez,et al.  Catalytic pyrolysis of HDPE in continuous mode over zeolite catalysts in a conical spouted bed reactor , 2009 .

[33]  Javier Bilbao,et al.  Influence of Tire Formulation on the Products of Continuous Pyrolysis in a Conical Spouted Bed Reactor , 2009 .

[34]  Paul T. Williams,et al.  Pyrolysis–gasification of post-consumer municipal solid plastic waste for hydrogen production , 2010 .

[35]  P. Canu,et al.  Two-steps selective thermal depolymerization of polyethylene. 1: Feasibility and effect of devolatilization heating policy , 2010 .

[36]  Javier Bilbao,et al.  Olefin Production by Catalytic Transformation of Crude Bio-Oil in a Two-Step Process , 2010 .

[37]  Javier Bilbao,et al.  Selective production of olefins from bioethanol on HZSM-5 zeolite catalysts treated with NaOH , 2010 .

[38]  Javier Bilbao,et al.  Recycling poly-(methyl methacrylate) by pyrolysis in a conical spouted bed reactor , 2010 .

[39]  Su-Hwa Jung,et al.  Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor , 2010 .

[40]  Rahul Singh,et al.  Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products—A world prospective , 2010 .

[41]  M. Lemos,et al.  Catalytic degradation of low and high density polyethylenes using ethylene polymerization catalysts: Kinetic studies using simultaneous TG/DSC analysis , 2010 .

[42]  Javier Bilbao,et al.  Operating Conditions for the Pyrolysis of Poly-(ethylene terephthalate) in a Conical Spouted-Bed Reactor , 2010 .

[43]  J. Bilbao,et al.  Hydrothermally stable HZSM-5 zeolite catalysts for the transformation of crude bio-oil into hydrocarbons , 2010 .

[44]  G. Lopez,et al.  Product Yields and Compositions in the Continuous Pyrolysis of High-Density Polyethylene in a Conical Spouted Bed Reactor , 2011 .

[45]  Rafael Maya-Yescas,et al.  The Fluidized-bed Catalytic CrackingUnit Building its Future Environment , 2011 .

[46]  J. Bilbao,et al.  Insights into the coke deposited on HZSM-5, Hβ and HY zeolites during the cracking of polyethylene , 2011 .

[47]  Ger Devlin,et al.  Waste Polyolefins to Liquid Fuels via Pyrolysis: Review of Commercial State-of-the-Art and Recent Laboratory Research , 2011 .

[48]  G. Lopez,et al.  Continuous Polyolefin Cracking on an HZSM-5 Zeolite Catalyst in a Conical Spouted Bed Reactor , 2011 .

[49]  G. Lopez,et al.  Role of pore structure in the deactivation of zeolites (HZSM-5, Hβ and HY) by coke in the pyrolysis of polyethylene in a conical spouted bed reactor , 2011 .

[50]  A. K. Panda,et al.  A review on tertiary recycling of high-density polyethylene to fuel. , 2011 .

[51]  Javier Bilbao,et al.  Influence of temperature on biomass pyrolysis in a conical spouted bed reactor , 2012 .

[52]  M. Lemos,et al.  The effect of ZSM-5 zeolite acidity on the catalytic degradation of high-density polyethylene using simultaneous DSC/TG analysis , 2012 .

[53]  W. Yang,et al.  Pyrolysis of polyolefins for increasing the yield of monomers' recovery. , 2012, Waste management.

[54]  M. Artetxe,et al.  Effect of the acidity of the HZSM-5 zeolite catalyst on the cracking of high density polyethylene in a conical spouted bed reactor , 2012 .