A local shift-variant Fourier model and experimental validation of circular cone-beam computed tomography artifacts.

Large field of view cone-beam computed tomography (CBCT) is being achieved using circular source and detector trajectories. These circular trajectories are known to collect insufficient data for accurate image reconstruction. Although various descriptions of the missing information exist, the manifestation of this lack of data in reconstructed images is generally nonintuitive. One model predicts that the missing information corresponds to a shift-variant cone of missing frequency components. This description implies that artifacts depend on the imaging geometry, as well as the frequency content of the imaged object. In particular, objects with a large proportion of energy distributed over frequency bands that coincide with the missing cone will be most compromised. These predictions were experimentally verified by imaging small, localized objects (acrylic spheres, stacked disks) at varying positions in the object space and observing the frequency spectrums of the reconstructions. Measurements of the internal angle of the missing cone agreed well with theory, indicating a right circular cone for points on the rotation axis, and an oblique, circular cone elsewhere. In the former case, the largest internal angle with respect to the vertical axis corresponds to the (half) cone angle of the CBCT system (typically approximately 5 degrees - 7.5 degrees in IGRT). Object recovery was also found to be strongly dependent on the distribution of the object's frequency spectrum relative to the missing cone, as expected. The observed artifacts were also reproducible via removal of local frequency components, further supporting the theoretical model. Larger objects with differing internal structures (cellular polyurethane, solid acrylic) were also imaged and interpreted with respect to the previous results. Finally, small animal data obtained using a clinical CBCT scanner were observed for evidence of the missing cone. This study provides insight into the influence of incomplete data collection on the appearance of objects imaged in large field of view CBCT.

[1]  P Edholm,et al.  Inherent limitations in ectomography. , 1988, IEEE transactions on medical imaging.

[2]  A V Bronnikov,et al.  Cone-beam reconstruction by backprojection and filtering. , 2000, Journal of the Optical Society of America. A, Optics, image science, and vision.

[3]  Rolf Clackdoyle,et al.  Cone-beam tomography from 12 pinhole vertices , 2001, 2001 IEEE Nuclear Science Symposium Conference Record (Cat. No.01CH37310).

[4]  Avinash C. Kak,et al.  Principles of computerized tomographic imaging , 2001, Classics in applied mathematics.

[5]  Philippe Rizo,et al.  Comparison of two three-dimensional x-ray cone-beam-reconstruction algorithms with circular source trajectories , 1991 .

[6]  R. Lecomte,et al.  Comparison of analytical and algebraic 2D tomographic reconstruction approaches for irregularly sampled microCT data , 2007, 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[7]  R M Leahy,et al.  Derivation and analysis of a filtered backprojection algorithm for cone beam projection data. , 1991, IEEE transactions on medical imaging.

[8]  Pierre Grangeat.  Analyse d'un systeme d'imagerie 3d par reconstruction a partir de radiographies x en geometrie conique , 1987 .

[9]  Gyuseong Cho,et al.  Artifacts associated with implementation of the Grangeat formula. , 2002, Medical physics.

[10]  J. Boone,et al.  Evaluation of the spatial resolution characteristics of a cone-beam breast CT scanner. , 2006, Medical physics.

[11]  J. Hsieh,et al.  A practical cone beam artifact correction algorithm , 2000, 2000 IEEE Nuclear Science Symposium. Conference Record (Cat. No.00CH37149).

[12]  J. Hsieh,et al.  A three-dimensional weighted cone beam filtered backprojection (CB-FBP) algorithm for image reconstruction in volumetric CT under a circular source trajectory , 2005, Physics in medicine and biology.

[13]  Ruola Ning,et al.  Supergridded cone-beam reconstruction and its application to point-spread function calculation. , 2005, Applied optics.

[14]  K C Tam,et al.  Filtering point spread function in backprojection cone-beam CT and its applications in long object imaging. , 2002, Physics in medicine and biology.

[15]  Bruce D. Smith.  Image Reconstruction from Cone-Beam Projections: Necessary and Sufficient Conditions and Reconstruction Methods , 1985, IEEE Transactions on Medical Imaging.

[16]  Norbert J. Pelc,et al.  A Fourier rebinning algorithm for cone beam CT , 2008, SPIE Medical Imaging.

[17]  S. Deans.  The Radon Transform and Some of Its Applications , 1983 .

[18]  Y. Bresler,et al.  Sampling Requirements for Circular Cone Beam Tomography , 2006, 2006 IEEE Nuclear Science Symposium Conference Record.

[19]  Guang-Hong Chen,et al.  Guidance for cone-beam CT design: tradeoff between view sampling rate and completeness of scanning trajectories , 2006, SPIE Medical Imaging.

[20]  H. Yang,et al.  FBP-type Cone-Beam Reconstruction Algorithm with Radon Space Interpolation Capabilities for Axially Truncated Data from a Circular Orbit , 2006 .

[21]  Xiaochuan Pan,et al.  Image reconstruction with a shift‐variant filtration in circular cone‐beam CT , 2004, Int. J. Imaging Syst. Technol..

[22]  Li Zhang,et al.  An error-reduction-based algorithm for cone-beam computed tomography. , 2004, Medical physics.

[23]  Tsuneo Saito,et al.  Derivation and implementation of a cone-beam reconstruction algorithm for nonplanar orbits , 1994, IEEE Trans. Medical Imaging.

[24]  Hui Hu,et al.  AN IMPROVED CONE-BEAM RECONSTRUCTION ALGORITHM FOR THE CIRCULAR ORBIT , 2006 .

[25]  L. Feldkamp,et al.  Practical cone-beam algorithm , 1984 .

[26]  J H Siewerdsen,et al.  Cone-beam computed tomography with a flat-panel imager: initial performance characterization. , 2000, Medical physics.

[27]  James T Dobbins,et al.  Digital x-ray tomosynthesis: current state of the art and clinical potential. , 2003, Physics in medicine and biology.

[28]  F. Natterer.  The Mathematics of Computerized Tomography , 1986 .

[29]  David V. Finch.  CONE BEAM RECONSTRUCTION WITH SOURCES ON A CURVE , 1985 .

[30]  Françoise Peyrin,et al.  Analysis of a cone beam x-ray tomographic system for different scanning modes , 1992 .

[31]  H. Tuy.  AN INVERSION FORMULA FOR CONE-BEAM RECONSTRUCTION* , 1983 .

[32]  J Gregor,et al.  Three-dimensional focus of attention for iterative cone-beam micro-CT reconstruction. , 2006, Physics in medicine and biology.

[33]  Rolf Clackdoyle,et al.  A cone-beam reconstruction algorithm using shift-variant filtering and cone-beam backprojection , 1994, IEEE Trans. Medical Imaging.

[34]  F. Harris.  On the use of windows for harmonic analysis with the discrete Fourier transform , 1978, Proceedings of the IEEE.

[35]  B. Tsui,et al.  A fully three-dimensional reconstruction algorithm with the nonstationary filter for improved single-orbit cone beam SPECT , 1993 .

[36]  Günter Lauritsch,et al.  Theoretical framework for filtered back projection in tomosynthesis , 1998, Medical Imaging.