Power Electronics for Future Utility Applications

Medium-voltage converters, originally developed for industrial drives (e.g. in steel and paper mills), have nowadays entered utility applications. For several years, the growing need for power quality in distribution systems in conjunction with the large scale integration of renewable energy sources has boosted the demand for new technologies. Together with communication systems, power electronics are the key enabling technology to meet these challenges. This paper addresses several utility applications for power electronics, some of which are in use already today though market penetration is still low. In the field of high power inverters, conventional 3-level hard-switching converters as presently used e.g. in wind turbines are presented alongside with soft-switching converters and their possible applications such as STATCOMs or mini-turbines. The possibility of using DC instead of AC transmission and distribution systems will be discussed. DC systems have already been used for several decades to transmit bulk power. New opportunities for the use of modern VSC-HVDC will be shown, such as DC distribution systems. For this novel application, new technologies are needed, such as multi-megawatt DC-DC converters and DC circuit breakers; possible concepts for these technologies will be addressed. Cycloconverters, a rather conventional technology, have been applied recently in innovative ways to increase the efficiencies of very high-power pumped- hydro storage systems. Due to the fact that the development of new converter systems is always strongly related to the available device technology, future high-power devices will finally be discussed.

[1]  A. Sannino,et al.  Efficiency analysis of low- and medium- voltage DC distribution systems , 2004, IEEE Power Engineering Society General Meeting, 2004..

[2]  A. Averberg,et al.  Multi-Phase Series Resonant DC-to-DC Converters: Transient Investigations , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[3]  J. McDowall,et al.  High power batteries for utilities - the world's most powerful battery and other developments , 2004, IEEE Power Engineering Society General Meeting, 2004..

[4]  H. Akagi,et al.  DC microgrid based distribution power generation system , 2004, The 4th International Power Electronics and Motion Control Conference, 2004. IPEMC 2004..

[5]  L.H. Walker,et al.  10 MW GTO converter for battery peaking service , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[6]  F.C. Lee,et al.  Introducing the emitter turn-off thyristor (ETO) , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[7]  A. Sannino,et al.  Low-Voltage DC Distribution System for Commercial Power Systems With Sensitive Electronic Loads , 2007, IEEE Transactions on Power Delivery.

[8]  D. Boroyevich,et al.  Modeling, control and stability analysis of a PEBB based DC DPS , 1999 .

[9]  J. Janning,et al.  Analysis of a 300 MW variable speed drive for pump-storage plant applications , 2005, 2005 European Conference on Power Electronics and Applications.

[10]  Ying Lu,et al.  Modeling and Dynamic Simulations of Doubly Fed Adjustable-Speed Pumped Storage Units , 2007, IEEE Transactions on Energy Conversion.

[11]  Optimized Gate Drivers for Internally Commutated Thyristors (ICTs) , 2006, IEEE Transactions on Industry Applications.

[12]  B.W. McConnell,et al.  Applications of high temperature superconductors to direct current electric power transmission and distribution , 2005, IEEE Transactions on Applied Superconductivity.

[13]  Gerard Ledwich,et al.  Study on resonant fly-back converter for DC distribution system , 1999 .

[14]  Peter Kdllcnspcrgcr,et al.  High-Power Converter Systems forHigh-Speed Generators , 2005 .

[15]  T.A. Meynard,et al.  Multi-level conversion: high voltage choppers and voltage-source inverters , 1992, PESC '92 Record. 23rd Annual IEEE Power Electronics Specialists Conference.

[16]  B. T. Ooi,et al.  Optimal Acquisition and Aggregation of Offshore Wind Power by Multiterminal Voltage-Source HVdc , 2002, IEEE Power Engineering Review.

[17]  D.J. Hammerstrom,et al.  AC Versus DC Distribution SystemsDid We Get it Right? , 2007, 2007 IEEE Power Engineering Society General Meeting.

[18]  Peter Steimer,et al.  IGCT-a new emerging technology for high power, low cost inverters , 1997 .

[19]  Rik W. De Doncker,et al.  The Internally Commutated Thyristor - A new GCT with integrated turn-off unit , 2006 .

[20]  R.W. De Doncker,et al.  The MTO thyristor-a new high power bipolar MOS thyristor , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[21]  R.W. De Doncker,et al.  Circuit breaker concepts for future high-power DC-applications , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[22]  Thierry Meynard,et al.  A ZVS imbricated cell multilevel inverter with auxiliary resonant commutated poles , 2002 .

[23]  J. McDowall,et al.  Integrating energy storage with wind power in weak electricity grids , 2006 .

[24]  R. D. De Doncker,et al.  Novel MTO-design based on silicon-silicon bonding , 2002, VIII IEEE International Power Electronics Congress, 2002. Technical Proceedings. CIEP 2002..

[25]  M. Kamibayashi,et al.  Recent sodium sulfur battery applications , 2001, 2001 IEEE/PES Transmission and Distribution Conference and Exposition. Developing New Perspectives (Cat. No.01CH37294).

[26]  D. J. Swider,et al.  Compressed Air Energy Storage in an Electricity System With Significant Wind Power Generation , 2007, IEEE Transactions on Energy Conversion.

[27]  S. Chusanapiputt.  The studies of transmission system interconnection between PR China and Thailand , 2000, PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409).

[28]  R.W. De Doncker,et al.  High-power converter systems for high-speed generators , 2005, 2005 European Conference on Power Electronics and Applications.

[29]  Mesut Baran,et al.  DC distribution for industrial systems: opportunities and challenges , 2002, IEEE Technical Conference Industrial and Commerical Power Systems.

[30]  R.W. De Doncker,et al.  The auxiliary resonant commutated pole converter , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[31]  A. Bito,et al.  Overview of the sodium-sulfur battery for the IEEE Stationary Battery Committee , 2005, IEEE Power Engineering Society General Meeting, 2005.

[32]  Sibylle Dieckerhoff,et al.  Comparison of state-of-the-art voltage source converter topologies for medium voltage applications , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[33]  Stefan Lundberg.  Wind Farm Configuration and Energy Efficiency Studies - Series DC versus AC Layouts , 2006 .

[34]  R.W. De Doncker,et al.  Comparison of Hard-Switched Multi-Level Inverter Topologies for STATCOM by Loss-Implemented Simulation and Cost Estimation , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[35]  A. Sawle,et al.  Novel power MOSFET packaging technology doubles power density in synchronous buck converters for next generation microprocessors , 2002, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335).