High temperature deformation of IN718 superalloy: use of basic creep modelling in the study of Nickel and single-phase Ni-based superalloys
暂无分享,去创建一个
[1] S. Spigarelli,et al. Basic creep modelling of aluminium , 2018 .
[2] S. Spigarelli,et al. A Unified Physical Model for Creep and Hot Working of Al-Mg Solid Solution Alloys , 2017 .
[3] R. Sandström. Influence of phosphorus on the tensile stress strain curves in copper , 2016 .
[4] J. M. Cabrerab,et al. Microstructural Evolution and Constitutive Equations of Inconel 718 Alloy under Quasi-static and Quasi-dynamic Conditions , 2016 .
[5] D. Raabe,et al. Ab initio study of compositional trends in solid solution strengthening in metals with low Peierls stresses , 2015 .
[6] R. Sandström,et al. First-principles evaluation of the effect of alloying elements on the lattice parameter of a 23Cr25NiWCuCo austenitic stainless steel to model solid solution hardening contribution to the creep strength , 2015 .
[7] Lars-Erik Lindgren,et al. Flow stress model for IN718 accounting for evolution of strengthening precipitates during thermal treatment , 2014 .
[8] Yang Wang,et al. Hot deformation behavior of delta-processed superalloy 718 , 2011 .
[9] J. B. Singh,et al. Precipitation of γ′ phase in δ-precipitated Alloy 718 during deformation at elevated temperatures , 2010 .
[10] Honghua Zhang,et al. Deformation characteristics of δ phase in the delta-processed Inconel 718 alloy , 2010 .
[11] W. Shao,et al. Tensile deformation behavior of superalloy 718 at elevated temperatures , 2009 .
[12] W. Shao,et al. Flow behavior and microstructures of superalloy 718 during high temperature deformation , 2008 .
[13] Henrik Andersson,et al. Creep in phosphorus alloyed copper during power-law breakdown , 2008 .
[14] Jose María Cabrera,et al. High temperature deformation of Inconel 718 , 2006 .
[15] W. C. Liu,et al. Effect of the δ phase on the hot deformation behavior of Inconel 718 , 2005 .
[16] M. E. Kassner. Taylor hardening in five-power-law creep of metals and Class M alloys , 2004 .
[17] F. Montheillet,et al. EBSD Investigation and Modeling of the Microstructural Evolutions of Superalloy 718 During Hot Deformation , 2004 .
[18] J. Jonas,et al. Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation , 2003 .
[19] H. J. McQueen,et al. Constitutive analysis in hot working , 2002 .
[20] D. S. Sarma,et al. EFFECT OF SOLUTION TREATMENT TEMPERATURE ON THE MICROSTRUCTURE AND TENSILE PROPERTIES OF P/M (HIP) PROCESSED SUPERALLOY INCONEL 718 , 2001 .
[21] Yellapregeda Prasad V.R.K.,et al. Hot Working Guide: A Compendium of Processing Maps , 1997 .
[22] J. Tien,et al. The effect of varying AI, Ti,and Nb content on the phase stability of INCONEL 718 , 1988 .
[23] Srikumar Banerjee,et al. Precipitation of the δ-Ni3Nb phase in two nickel base superalloys , 1988 .
[24] R. Farraro,et al. Temperature dependence of the Young’s modulus and shear modulus of pure nickel, platinum, and molybdenum , 1977 .
[25] C. M. Sellars,et al. Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation , 1969 .
[26] H. Oikawa,et al. Steady-State Creep Characteristics of Polycrystalline Nickel in the Temperature Range 500° to 1000°C , 1969 .
[27] J. R. MacEwan,et al. SELF-DIFFUSION IN POLYCRYSTALLINE NICKEL , 1959 .