Principles of computer simulation design for the needs of improvement of the raw materials combined transport system

This article is focused on computer simulation design for raw materials transportation. The creation of a simulation model of the combined transport system for the raw materials transportation has its own problematic parts. In general, these are parts, which represent transport nodes, i.e. parts of the system in which raw materials are reloaded from one vehicle to another. The given operations are in practice dependent on the preparedness of all transportation means, which participate in it. To locate operations of reloading of the raw materials from one vehicle to another and the check of the preparedness of the vehicles of the reloading in the simulation system is more demanding because it is necessary to take into consideration several aspects, such as an existence of a vehicle with raw materials, an existence of a vehicle to which it is to be reloaded, a suitable freeloader, and so on. The article focuses on defining a procedure and correct steps at the creation of the simulation computer model of the combined raw materials transport system in the EXTENDSIM simulation system based on specific data from a real transport system. As is clear from the proposed procedure of the creation of the combined raw material transport system, as a check element of the transport system preparedness, it is suitable to use the "Gate" block and its features in the EXTENDSIM simulation system. As transpires from the results of simulation of the combined raw material transport system, about 322,000 tons of raw materials at 90-96% with the use of all vehicles is transported during the year.