Adding chemically selective subtraction to multi-material 3D additive manufacturing

Existing photoresists for 3D laser lithography that can be removed after development in a subtractive manner typically suffer from harsh cleavage conditions. Here, we report chemoselectively cleavable photoresists for 3D laser lithography based on silane crosslinkers, allowing the targeted degradation of 3D printed microstructures under mild conditions. Three bifunctional silane crosslinkers carrying various substitutions on the silicon atom are synthesized. The photoresists are prepared by mixing these silane crosslinkers with pentaerythritol triacrylate and a two-photon photoinitiator. The presence of pentaerythritol triacrylate significantly enhances the direct laser written structures with regard to resolution, while the microstructures remain cleavable. For the targeted cleavage of the fabricated 3D microstructures, simply a methanol solution including inorganic salts is required, highlighting the mild cleavage conditions. Critically, the photoresists can be cleaved selectively, which enables the sequential degradation of direct laser written structures and allows for subtractive manufacturing at the micro- and nanoscale.Subtractive manufacturing of microstructures is important for many applications, yet photoresists for 3D laser lithography allow only removal after development under harsh cleavage conditions. Here, the authors introduce a set of chemoselective cleavable photoresists allowing the orthogonal cleavage of microstructures under mild conditions.

[1]  Tommaso Baldacchini,et al.  Multiphoton fabrication. , 2007, Angewandte Chemie.

[2]  J. Fischer,et al.  Three‐dimensional optical laser lithography beyond the diffraction limit , 2013 .

[3]  Koji Sugioka,et al.  High efficiency integration of three-dimensional functional microdevices inside a microfluidic chip by using femtosecond laser multifoci parallel microfabrication , 2016, Scientific Reports.

[4]  Yang Gao,et al.  Two-photon polymerization: investigation of chemical and mechanical properties of resins using Raman microspectroscopy. , 2014, Optics letters.

[5]  Mangirdas Malinauskas,et al.  Tuning the refractive index in 3D direct laser writing lithography: towards GRIN microoptics , 2015 .

[6]  John T. Fourkas,et al.  Cover Picture: Multiphoton Fabrication (Angew. Chem. Int. Ed. 33/2007) , 2007 .

[7]  R. D. Crouch,et al.  Selective deprotection of silyl ethers , 2013 .

[8]  Maria Farsari,et al.  Direct laser writing , 2015 .

[9]  C. Greiner,et al.  SU-8: a photoresist for high-aspect-ratio and 3D submicron lithography , 2007 .

[10]  Sytze J Buwalda,et al.  Influence of amide versus ester linkages on the properties of eight-armed PEG-PLA star block copolymer hydrogels. , 2010, Biomacromolecules.

[11]  Chaenyung Cha,et al.  Tuning hydrogel properties and function using substituent effects. , 2010, Soft matter.

[12]  M. Malinauskas,et al.  Microactuation and sensing using reversible deformations of laser-written polymeric structures , 2017, Nanotechnology.

[13]  Robert R McLeod,et al.  Two-Color Single-Photon Photoinitiation and Photoinhibition for Subdiffraction Photolithography , 2009, Science.

[14]  M. Wegener,et al.  Guiding Cell Attachment in 3D Microscaffolds Selectively Functionalized with Two Distinct Adhesion Proteins , 2017, Advanced materials.

[15]  M. Wegener,et al.  Cleaving Direct-Laser-Written Microstructures on Demand. , 2017, Angewandte Chemie.

[16]  Yong‐Lai Zhang,et al.  Designable 3D nanofabrication by femtosecond laser direct writing , 2010 .

[17]  Benjamin Richter,et al.  3D Laser Micro- and Nanoprinting: Challenges for Chemistry. , 2017, Angewandte Chemie.

[18]  R. Gattass,et al.  Achieving λ/20 Resolution by One-Color Initiation and Deactivation of Polymerization , 2009, Science.

[19]  Saulius Juodkazis,et al.  Three‐Dimensional Spiral‐Architecture Photonic Crystals Obtained By Direct Laser Writing , 2005 .

[20]  D. Norris,et al.  Thermally Stable Organic–Inorganic Hybrid Photoresists for Fabrication of Photonic Band Gap Structures with Direct Laser Writing , 2008 .

[21]  Jaroslaw Jacak,et al.  120 nm resolution and 55 nm structure size in STED-lithography. , 2013, Optics express.

[22]  N. Wakabayashi,et al.  Superhydrophilic co-polymer coatings on denture surfaces reduce Candida albicans adhesion-An in vitro study. , 2018, Archives of oral biology.

[23]  P. Hodge,et al.  Protective groups in organic synthesis , 1981 .

[24]  J. DeSimone,et al.  Tunable bifunctional silyl ether cross-linkers for the design of acid-sensitive biomaterials. , 2010, Journal of the American Chemical Society.

[25]  W. Freude,et al.  In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration , 2018 .

[26]  Harald Giessen,et al.  Two-photon direct laser writing of ultracompact multi-lens objectives , 2016, Nature Photonics.

[27]  A. Piskarskas,et al.  Ultrafast laser nanostructuring of photopolymers: a decade of advances , 2013 .

[28]  Harald Giessen,et al.  Three‐Dimensional Bichiral Plasmonic Crystals Fabricated by Direct Laser Writing and Electroless Silver Plating , 2011, Advanced materials.