Measurement of mechanical properties for MEMS materials

The microscopic mechanical devices in microelectromechanical systems (MEMS) use materials such as silicon and many other thin films, which had not previously been considered mechanical materials and thus are not well characterized regarding their mechanical properties. However, as the field matures, sustained research and commercial development in the coming years will demand better understanding of mechanical properties such as Young's modulus and the fracture strength. Uniaxial tension testing is generally considered the most reliable way to measure the mechanical properties. However, the problems associated with the microscopic size of the test specimen for MEMS, such as sample handling and sample alignment, led to such alternative ways as membrane-bulge testing and natural frequency testing at the beginning of MEMS. In this paper, recent methods for testing microscale mechanical properties and their results are summarized. Many reports, based on two distinct types of test, beam bending and direct tension, are introduced. The efforts to integrate the sample and loading system on the microscopic scale are also explained. Studies of fatigue, the most recent development in microscale measurement of mechanical properties, are discussed. The results from the testing methods described are listed for comparison.

[1]  Roger T. Howe,et al.  Statistical characterization of fracture of brittle MEMS materials , 1999, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[2]  N. C. MacDonald,et al.  MICROINSTRUMENTS FOR SUBMICRON MATERIAL STUDIES , 1998 .

[3]  Ioannis Chasiotis,et al.  Mechanical properties of thin polysilicon films by means of probe microscopy , 1998, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[4]  O. Tabata,et al.  Specimen size effect on tensile strength of surface-micromachined polycrystalline silicon thin films , 1998 .

[5]  R. Mullen,et al.  The Fracture Toughness of Polysilicon Microdevices , 1998 .

[6]  Staffan Greek,et al.  Tensile testing of thin-film microstructures , 1997, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[7]  R. L. Edwards,et al.  A new technique for measuring the mechanical properties of thin films , 1997 .

[8]  S. Cunningham,et al.  Mechanical behavior of structures for microelectromechanical systems , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[9]  Mitsuhiro Shikida,et al.  Micro tensile-test of silicon film having different crystallographic orientations , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[10]  R. L. Edwards,et al.  Mechanical properties of LIGA-deposited nickel for MEMS transducers , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[11]  J. Bustillo,et al.  Embedded interconnect and electrical isolation for high-aspect-ratio, SOI inertial instruments , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[12]  Bin Yuan,et al.  New test structures and techniques for measurement of mechanical properties of MEMS materials , 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[13]  C. J. Wilson,et al.  Fracture testing of bulk silicon microcantilever beams subjected to a side load , 1996 .

[14]  Noel C. MacDonald,et al.  Micro mechanical single crystal silicon fracture studies torsion and bending , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[15]  J. Beuth.  Cracking of thin bonded films in residual tension , 1992 .

[16]  Mehran Mehregany,et al.  Mechanical integrity of polysilicon films exposed to hydrofluoric acid solutions , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[17]  R. Howe,et al.  Laterally driven polysilicon resonant microstructures , 1989 .

[18]  Timothy P. Weihs,et al.  Mechanical deflection of cantilever microbeams: A new technique for testing the mechanical properties of thin films , 1988 .

[19]  L. Tenerz,et al.  Fracture testing of silicon microelements in situ in a scanning electron microscope , 1988 .

[20]  J. K. Srivastava,et al.  Electrical Conductivity of Silicon Dioxide Thermally Grown on Silicon , 1985 .

[21]  R. Bradt,et al.  Fracture of Isotropic and Textured Ba Hexaferrite , 1981 .

[22]  K. Petersen,et al.  Young’s modulus measurements of thin films using micromechanics , 1979 .

[23]  Hyman Joseph Levinstein,et al.  Thermal stresses and cracking resistance of dielectric films (SiN, Si3N4, and SiO2) on Si substrates , 1978 .

[24]  W. Brantley.  Calculated elastic constants for stress problems associated with semiconductor devices , 1973 .

[25]  J. Wortman,et al.  Young's Modulus, Shear Modulus, and Poisson's Ratio in Silicon and Germanium , 1965 .

[26]  G. L. Pearson,et al.  Deformation and fracture of small silicon crystals , 1957 .

[27]  R. Eisner.  Tensile tests on silicon whiskers , 1955 .

[28]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .