Sintering behavior of alumina reinforced with (Ti, W)carbides
暂无分享,去创建一个
[1] Tadahiko Watanabe,et al. Fabrication and Mechanical Properties of Al2O3-WC-Co Composites by Vacuum Hot Pressing , 2005 .
[2] Jianlin Shi,et al. Influence of tungsten carbide particles on resistance of alumina matrix ceramics to thermal shock , 2001 .
[3] W. Acchar,et al. Production of niobium carbide ceramic composites derived from polymer/filler mixtures: preliminary results , 2001 .
[4] W. Acchar,et al. Sintering behaviour of alumina–niobium carbide composites , 2000 .
[5] W. Acchar,et al. Sintering behaviour of alumina–tungsten carbide composites , 2000 .
[6] W. Acchar,et al. Strength degradation of a tungsten carbide-cobalt composite at elevated temperatures , 1999 .
[7] Z. Rak,et al. Manufacture and properties of Al2O3–TiN particulate composites , 1998 .
[8] M. Harmer,et al. Particle‐Inhibited Grain Growth in AI2O3‐SiC: I, Experimental Results , 1996 .
[9] S. Bahadur,et al. Friction and wear behavior of tungsten and titanium carbide coatings , 1996 .
[10] Takahiro Tanaka,et al. Mechanical Properties and Cutting Performance of Titanium Carbide Whisker/Alumina Composites , 1996 .
[11] Doh-Yeon Kim,et al. Effect of Y2O3 additions on the densification of an Al2O3-TiC composite , 1993 .
[12] T. Koyama,et al. Effect of Microstructure on Mechanical Properties and Cutting Performance of Al2O3-Ti(C, N) Ceramics , 1992 .
[13] G. S. Upadhyaya,et al. Properties and microstructure of WC–TiC–Co and WC–TiC–MO2C–Co(Ni) cemented carbides , 1991 .
[14] Mats Hillert,et al. Inhibition of grain growth by second-phase particles , 1988 .
[15] A. Virkar,et al. Pressureless-sintered Al2O3-TiC composites , 1988 .
[16] J. Murray. The Ti−W (Titanium-Tungsten) system , 1981 .
[17] G. Brandt,et al. Ceramic Cutting Tools, State of the Art and Development Trends , 1999 .
[18] W. Schubert,et al. General aspects and limits of conventional ultrafine WC powder manufacture and hard metal production , 1995 .
[19] H. Baker,et al. Alloy phase diagrams , 1992 .