A new High Step-up Three-Port DC-DC Structure for Hybrid PV/Battery Energy Systems

In this paper, a new high step-up three-port structure using one PV panel and a battery as a storage element is proposed. In this proposed structure, three power switches, one single inductor and one coupled inductor are used. The gain of voltage for the presented topology is higher than conventional three-port converters which is referred in this paper. Using one unidirectional and one bidirectional inputs develop the proposed topology as a compatible candidate for hybrid power system. Controlling state of charge (SOC) for battery, and regulating the voltage of output can be achieved by adjusting duty cycles of switches. Also, the capability of supplying the load and either charging or discharging of the storage element is provided by input source. In addition, the capability of supplying the load without PV source is provided by battery. The analysis of steady-state condition in the proposed converter is discussed completely. Finally, the validity of the presented structure is verified by simulation results.

[1]  Kashem M. Muttaqi,et al.  A review of topologies of three-port DC–DC converters for the integration of renewable energy and energy storage system , 2016 .

[2]  Alex Q. Huang,et al.  A High Step-Up Three-Port DC–DC Converter for Stand-Alone PV/Battery Power Systems , 2013, IEEE Transactions on Power Electronics.

[3]  Reza Iravani,et al.  A new multi-input step-up DC–DC converter for hybrid energy systems , 2017 .

[4]  Mohamad Reza Banaei,et al.  A New Three Input DC/DC Converter for Hybrid PV/FC/Battery Applications , 2017, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[5]  Ali Ajami,et al.  A Novel Step-Up Multiinput DC–DC Converter for Hybrid Electric Vehicles Application , 2017, IEEE Transactions on Power Electronics.

[6]  Fahmy M. Bendary,et al.  New topology of multiple-input single-output PV system for DC load applications , 2016 .

[7]  Seyed Hossein Hosseini,et al.  Enhancement of extracted maximum power from partially shaded multi-string PV panels using a new cascaded high step-up DC-DC-AC converter , 2015, 2015 9th International Conference on Electrical and Electronics Engineering (ELECO).

[8]  M. Sabahi,et al.  Modeling and Control of a New Three-Input DC–DC Boost Converter for Hybrid PV/FC/Battery Power System , 2012, IEEE Transactions on Power Electronics.

[9]  E. Babaei,et al.  An improved structure for Multi-Input high step-up DC-DC converters , 2017, 2017 8th Power Electronics, Drive Systems & Technologies Conference (PEDSTC).

[10]  Mehran Sabahi,et al.  Design and analysis of a novel SEPIC-based multi-input DC/DC converter , 2017 .

[11]  Ebrahim Babaei,et al.  Structure for multi-input multi-output dc–dc boost converter , 2016 .