Grain Refinement and Texture Change in Interstitial Free Steels after Severe Rolling and Ultra-Short Annealing

A Ti-stabilized interstitial free steel was highly cold deformed to a reduction of 95% and subsequently submitted to extremely short annealing cycles with heating rates varying between 300°C/s and 4500°C/s followed by water quench at various temperatures. The microstructural and textural development was studied through various consecutive stages: partially recrystallized, fully recrystallized and after α→γ→α transformation. It was found that irrespective of the heating rate the recrystallization has completely terminated before the onset of the ferrite to austenite phase transformation. In the fully recrystallized condition, ultra-rapid heating gave rise to substantially refined structures with an average ferrite grain size of 6µm. It was also observed that this grain refinement saturates with heating rates beyond 1000°C/s. With regard to the texture formation, the characteristic {111} deep drawing fibre of cold rolled IF steels was observed, irrespective of the heating rate, in an annealing treatment as short as 0.3s. After the forward and reverse α→γ transformation, the ensuing ferrite texture displayed a strong memory effect, as the {111} fibre was even more intense after the double transformation than before.