STRUCTURAL SYSTEM RELIABILITY USING LINEAR PROGRAMMING AND SIMULATION

The assessment of structural system reliability for reasonably complex structures is addressed. The general case of random loads and resistances with arbitrary probability distributions is examined for failure caused by simple plastic mechanisms. A combined simulation/linear programming approach gains its efficiency from the fact that every simulation derives an associated failure condition and its probability. The advantage of the method, therefore, is for highly reliable systems for which traditional Monte Carlo simulation techniques are notoriously inefficient. Load and resistance proportionalities are determined by each simulation, and the associated failure mode is identified by linear programming as a vertex on the system polytope. Significant modes are found naturally by the procedure and, in general, the number of such modes will be much less than the number of simulations. A single numerical integration without variable transformation determines the modal reliabilities, which are then combined in...

[1]  Fred Moses,et al.  System reliability developments in structural engineering , 1982 .

[2]  Jerome Bracken,et al.  STATISTICAL DECISION ANALYSIS OF STOCHASTIC LINEAR PROGRAMMING PROBLEMS. , 1966 .

[3]  Ove Ditlevsen,et al.  Probabilistic Statics of Discretized Ideal Plastic Frames , 1988 .

[4]  Achintya Haldar,et al.  IMPROVED SIMULATION TECHNIQUES AS STRUCTURAL RELIABILITY MODELS. , 1985 .

[5]  M Z Cohn,et al.  Unified Approach to the Theory of Plastic Structures , 1972 .

[6]  Hillel L. Kumin,et al.  A Method for the Solution of the Distribution Problem of Stochastic Linear Programming , 1974 .

[7]  Fred Moses,et al.  Identification of Failure Modes in System Reliability , 1988 .

[8]  P. Bjerager.  Probability Integration by Directional Simulation , 1988 .

[9]  A. M. Hasofer,et al.  Directional simulation in Gaussian processes , 1988 .

[10]  Alessandro Baratta,et al.  Limit Analysis of Structures with Stochastic Strength Variations , 1972 .

[11]  R. Corotis,et al.  Reliability of Ductile Systems With Random Strengths , 1985 .

[12]  Ross B. Corotis,et al.  Multiparametric Limit Analysis of Frames: Part I—Model , 1988 .

[13]  Ross B. Corotis,et al.  Failure Mode Enumeration for System Reliability Assessment by Optimization Algorithms , 1987 .

[14]  H. Saunders,et al.  Probabilistic Methods in Structural Engineering , 1984 .

[15]  Jati K. Sengupta,et al.  Stochastic Linear Programming with Applications to Economic Models , 1963 .

[16]  Palle Thoft-Christensen,et al.  Application of Structural Systems Reliability Theory , 1986 .

[17]  Ross B. Corotis,et al.  Failure Mode Identification for Structural Frames , 1987 .

[18]  Stephen A. Mahin,et al.  Seismic Response of Light Subsystems on Inelastic Structures , 1985 .

[19]  K. Chou,et al.  Observations on structural system reliability and the role of modal correlations , 1982 .

[20]  Ove Ditlevsen,et al.  Plastic Reliability Analysis By Directional Simulation , 1989 .

[21]  B. Ayyub,et al.  Practical Structural Reliability Techniques , 1984 .

[22]  Alessandro Baratta,et al.  An Improvement in the Static Method for Limit Analysis of Structures with Stochastic Strength Variations , 1973 .

[23]  A. Harbitz.  An efficient sampling method for probability of failure calculation , 1986 .

[24]  V. B. Watwood,et al.  Mechanism Generation for Limit Analysis of Frames , 1979 .

[25]  O. Ditlevsen,et al.  Methods of structural systems reliability , 1986 .