Evaluation of Liquid‐and Solid‐Contact, Pb2+‐Selective Polymer‐Membrane Electrodes for Soil Analysis

Pb2+-selective electrodes (ISEs) have been developed for the analysis of soil. Recent advances have extended the previous achievable limits of detection of ion-selective electrodes (ISEs) to submicromolar levels, opening up possibilities for new applications in environmental analysis. The simple construction of ISE's, their low cost and low power demand, coupled with improved detection limits make the electrodes well suited for environmental analysis. In this paper, the development and use of both liquid- and solid-contact ISEs for the detection of Pb2+ in a range of soil samples from abandoned mining sites is described. Solid-contact electrodes were made using poly(3-octylthipophene) as the internal mixed conductor layer. In addition, three techniques for the extraction of analyte from soil were studied in order to optimize the extraction of metal ions using techniques and solvents compatible with portable devices. Soil Pb2+ levels between 30 and 29,100 mg/kg were measured with the ISEs and were shown to be in good agreement with reference AAS measurements. Issues arising from the current definition and interpretation of ISE detection limits are also discussed.

[1]  A. Ivaska,et al.  Potentiometric sensors for Ag+ based on poly(3-octylthiophene) (POT) , 2005 .

[2]  Ernö Pretsch,et al.  A polypyrrole-based solid-contact Pb2+-selective PVC-membrane electrode with a nanomolar detection limit , 2004, Analytical and bioanalytical chemistry.

[3]  Ernö Pretsch,et al.  Response Behavior of Poly(vinyl chloride)‐ and Polyurethane‐Based Ca2+‐Selective Membrane Electrodes with Polypyrrole‐ and Poly(3‐octylthiophene)‐Mediated Internal Solid Contact , 2006 .

[4]  A. K. Chakraborti,et al.  Arsenic groundwater contamination in Middle Ganga Plain, Bihar, India: a future danger? , 2003, Environmental health perspectives.

[5]  Ernö Pretsch,et al.  Rational design of potentiometric trace level ion sensors. A Ag+-selective electrode with a 100 ppt detection limit. , 2002, Analytical chemistry.

[6]  E. Pretsch.  The new wave of ion-selective electrodes , 2007 .

[7]  B. Hattendorf,et al.  Potentiometric polymeric membrane electrodes for measurement of environmental samples at trace levels: new requirements for selectivities and measuring protocols, and comparison with ICPMS. , 2001, Analytical chemistry.

[8]  Dermot Diamond.  Peer Reviewed: Internet-Scale Sensing , 2004 .

[9]  N. D. de Rooij,et al.  Potential Drifts of Solid‐Contacted Ion‐Selective Electrodes Due to Zero‐Current Ion Fluxes Through the Sensor Membrane , 2000 .

[10]  E. Pretsch,et al.  Role of fulvic acid on lead bioaccumulation by Chlorella kesslerii. , 2003, Environmental science & technology.

[11]  D. Diamond,et al.  Trace‐Level Determination of Cs+ Using Membrane‐Based Ion‐Selective Electrodes , 2006 .

[12]  M. Meisters,et al.  Studies in the tetraarylborates , 1970 .

[13]  A. Jiménez,et al.  Diffusion coefficients of lead (II) nitrate in nitric acid aqueous solutions at 298 K , 2004 .

[14]  Johan Bobacka,et al.  Solution-cast films of poly(3,4-ethylenedioxythiophene) as ion-to-electron transducers in all-solid-state ion-selective electrodes , 2004 .

[15]  D. Günther,et al.  A novel polymeric membrane electrode for the potentiometric analysis of Cu2+ in drinking water , 2005 .

[16]  Eric Bakker,et al.  Dynamic diffusion model for tracing the real-time potential response of polymeric membrane ion-selective electrodes. , 2004, Analytical chemistry.

[17]  Dermot Diamond,et al.  Guidelines for Improving the Lower Detection Limit of Ion‐Selective Electrodes: A Systematic Approach , 2007 .

[18]  S. Plaza,et al.  Potentiometric sensor for the measurement of Cd2+ transport in yeast and plants. , 2005, Analytical biochemistry.

[19]  M. Fibbioli,et al.  Response and Diffusion Behavior of Mobile and Covalently Immobilized H+‐Ionophores in Polymeric Membrane Ion‐Selective Electrodes , 2002 .

[20]  George G. Guilbault,et al.  Recommendations for Nomenclature of Ion-selective Electrodes , 1977 .

[21]  Joseph Wang,et al.  Potentiometric immunoassay with quantum dot labels. , 2007, Analytical chemistry.