Targets for direct-drive fast ignition at total laser energy of 200-400 kJ

Basic issues for the design of moderate-gain fast ignition targets at total laser energy of 200–400kJ (with less than 100kJ for the igniting beams) are discussed by means of a simple integrated gain model. Gain curves are generated and their sensitivity to several parameters is analyzed. A family of scaled target is designed, based on 1D hydrodynamic simulations of the implosion stage and 2D model simulations of ignition and burn. It is found that ignition and propagating burn can be achieved by targets compressed by 100–150kJ, properly shaped laser pulses (with wavelength λc=0.35μm), and ignited by 80–100kJ pulses. This requires adiabat shaped implosions to limit Rayleigh-Taylor instability, at the same time keeping the fuel entropy at a very low level. In addition, the igniting beam should be coupled to the fuel with an efficiency of about 25%, and the hot-electron average penetration depth should be at most 1.2–1.5g∕cm2. According to the present understanding of ultraintense laser-matter interaction, t...

[1]  Stefano Atzeni,et al.  A first analysis of fast ignition of precompressed ICF fuel by laser-accelerated protons , 2002 .

[2]  S. Atzeni.  REVIEW ARTICLE: The physical basis for numerical fluid simulations in laser fusion , 1987 .

[3]  J. Knauer,et al.  Theory of laser-induced adiabat shaping in inertial fusion implosions: The relaxation method , 2005 .

[4]  Robert L. McCrory,et al.  Growth rates of the ablative Rayleigh–Taylor instability in inertial confinement fusion , 1998 .

[5]  A. Kemp,et al.  Stagnation pressure of imploding shells and ignition energy scaling of inertial confinement fusion targets. , 2001, Physical Review Letters.

[6]  M. Murakami,et al.  The Interaction Physics of the Fast Ignitor Concept , 1996, Physical review letters.

[7]  Scott C. Wilks,et al.  Review of progress in Fast Ignitiona) , 2005 .

[8]  M. Temporal.  Fast ignition of a compressed inertial confinement fusion hemispherical capsule by two proton beams , 2006 .

[9]  M. Key,et al.  The Generation and Transport of Large Currents in Dense Materials: The Physics of Electron Transport Relative to Fast Ignition , 2006 .

[10]  S. Slutz,et al.  Subignition fusion yields generated by fast heating of compressed deuterium–tritium and break-even scaling , 2004 .

[11]  R. Betti,et al.  Gain curves for direct-drive fast ignition at densities around 300 g/cc , 2006 .

[12]  Stefano Atzeni,et al.  Inertial fusion fast ignitor: Igniting pulse parameter window vs the penetration depth of the heating particles and the density of the precompressed fuel , 1999 .

[13]  R. Betti,et al.  High-density and high-ρR fuel assembly for fast-ignition inertial confinement fusion , 2005 .

[14]  S. Skupsky,et al.  Deceleration phase of inertial confinement fusion implosions , 2002 .

[15]  P. B. Radha,et al.  Hydrodynamic simulations of integrated experiments planned for the OMEGA/OMEGA EP laser systems , 2005 .

[16]  Richard D. Petrasso,et al.  Energy deposition of MeV electrons in compressed targets of fast-ignition inertial confinement fusion , 2006 .

[17]  P. Norreys,et al.  Integrated implosion/heating studies for advanced fast ignition , 2004 .

[18]  S. Skupsky,et al.  Improved performance of direct-drive inertial confinement fusion target designs with adiabat shaping using an intensity picket , 2003 .

[19]  Stefano Atzeni,et al.  Overview of ignition conditions and gain curves for the fast ignitor , 2005 .

[20]  S. Slutz,et al.  Radiation driven capsules for fast ignition fusion , 2003 .

[21]  A method for the automatic rezoning of 2-D Lagrangian codes for ICF implosions , 1991 .

[22]  Max Tabak,et al.  Models of gain curves for fast ignition , 2005 .

[23]  Shinsuke Fujioka,et al.  Implosion Hydrodynamics of Fast Ignition Targets , 2005 .

[24]  John Lindl,et al.  A generalized scaling law for the ignition energy of inertial confinement fusion capsules , 2000 .

[25]  Hiroyuki Shiraga,et al.  Hydrodynamics of Conically Guided Fast Ignition Targets , 2006 .

[26]  Kunioki Mima,et al.  Self‐consistent growth rate of the Rayleigh–Taylor instability in an ablatively accelerating plasma , 1985 .

[27]  J. Lindl.  Development of the indirect‐drive approach to inertial confinement fusion and the target physics basis for ignition and gain , 1995 .

[28]  M. Murakami,et al.  Efficient Shell Implosion and Target Design , 1987 .

[29]  H. Shiraga,et al.  Nuclear fusion: Fast heating scalable to laser fusion ignition , 2002, Nature.

[30]  M. Key,et al.  Proton Fast Ignition , 2005 .

[31]  R. Betti,et al.  Laser-Induced Adiabat Shaping by Relaxation in Inertial Fusion Implosions , 2004 .

[32]  Denis G. Colombant,et al.  High-gain direct-drive target design for laser fusion , 2000 .

[33]  M. D. Perry,et al.  Fast ignition by intense laser-accelerated proton beams. , 2001, Physical review letters.

[34]  P. B. Radha,et al.  Progress in hydrodynamics theory and experiments for direct-drive and fast ignition inertial confinement fusion , 2006 .

[35]  A. Caruso,et al.  Ignition thresholds for deuterium-tritium mixtures contaminated by high-Z material in cone-focused fast ignition , 2003 .

[36]  N. G. Basov,et al.  Thermonuclear gain of ICF targets with direct heating of ignitor , 1992 .

[37]  J. Ongena,et al.  Energy for Future Centuries: Prospects for Fusion Power as a Future Energy Source , 2010 .

[38]  J. Nuckolls,et al.  Laser Compression of Matter to Super-High Densities: Thermonuclear (CTR) Applications , 1972, Nature.

[39]  Michael D. Perry,et al.  Ignition and high gain with ultrapowerful lasers , 1994 .

[40]  J. Meyer-ter-Vehn,et al.  The physics of inertial fusion - Hydrodynamics, dense plasma physics, beam-plasma interaction , 2004 .

[41]  P. Norreys,et al.  Fast Heating of High-Density Plasmas with a Reentrant Cone Concept , 2006 .

[42]  Stefano Atzeni,et al.  Fast Ignition: Overview and Background , 2006 .

[43]  M. Rosen.  The physics issues that determine inertial confinement fusion target gain and driver requirements: A tutorial , 1999 .

[44]  A. Caruso,et al.  Some properties of the plasmas produced by irradiating light solids by laser pulses , 1968 .

[45]  R. Stephens,et al.  Implosion of indirectly driven reentrant-cone shell target. , 2003, Physical review letters.

[46]  Mike Dunne,et al.  A high-power laser fusion facility for Europe , 2006 .

[47]  N. Miyanaga,et al.  Fast heating of ultrahigh-density plasma as a step towards laser fusion ignition , 2001, Nature.

[48]  S. Atzeni.  Thermonuclear Burn Performance of Volume-Ignited and Centrally Ignited Bare Deuterium-Tritium Microspheres , 1995 .

[49]  Tabak,et al.  Absorption of ultra-intense laser pulses. , 1992, Physical review letters.