Recent results on the optical performance of solar two heliostats

Recent Sandia support of the Solar Two project has included the analysis of optical performance issues related to heliostat field improvements. Two types of heliostats will be used for the Solar Two project: The 1818 original 38.4 m{sup 2} Martin Marietta Co. heliostats, and 108 new 95 m{sup 2} Lugo heliostats. Carrisa Plains mirror modules will be used to construct the Lugo heliostats and refurbish original heliostats. Baseline, clean reflectivity measurements of 0.90 and 0.94 are recomended for the original heliostat and the Carrisa Plains modules, respectively. Sandia`s Beam Characterization System provided beam quality information for representative configurations of both heliostats. This showed that the replacement of two facets with Carrisa Plains modules on an original heliostat led to a slight increase in spillage, but also increased beam power. As expected, the large beam of the Lugo heliostat showed poorer beam quality and significant spillage, but proved to be an economical addition of reflective area. The Carrisa Plains modules were found to be nominally flat, although the focal length changed slightly with temperature. An analysis of the canting options for both types of heliostats was performed. It was recommended the original heliostats be canted with an on-axis, lookback method, whereas a two-step method using first on-, then off-axis approaches was recommended for the Lugo heliostats. Finally, measurements performed at the Daggett site showed that despite the 1992 Landers earthquake, heliostat pedestal tilt and the associated tracking errors are expected to be within acceptable limits.