Temperature dependence of the interfacial shear strength in glass-fibre epoxy composites

Abstract The present work focuses on further investigation of the hypothesis that a significant fraction of apparent interfacial shear strength (IFSS) in fibre-reinforced composites can be attributed to a combination of residual radial compressive stress and static friction at the fibre–polymer interface. The temperature dependence of the interfacial properties of a glass fibre–epoxy system has been quantified using the laboratory developed TMA-microbond technique. The temperature dependence of apparent IFSS of glass fibre–epoxy in the range 20 °C up to 150 °C showed a significant inverse dependence on testing temperature with a major step change in the glass transition region of the epoxy matrix. It is shown that the magnitude of the residual radial compressive stress at the interface due to thermal and cure shrinkage is of the same order of magnitude as the measured IFSS. It is concluded that it possible to suggest that residual stress combined with static adhesion could be the major contributor to the apparent interfacial adhesion in glass fibre–epoxy systems.

[1]  J. Thomason,et al.  Effect of silane coupling agent on mechanical performance of glass fibre , 2013, Journal of Materials Science.

[2]  R. S. Raghava,et al.  Thermal expansion of organic and inorganic matrix composites - a review of theoretical and experimental studies , 1988 .

[3]  Liu Yang,et al.  Interface strength in glass fibre-polypropylene measured using the fibre pull-out and microbond methods , 2010 .

[4]  C. Migliaresi,et al.  Effect of temperature and strain rate on interfacial shear stress transfer in carbon/epoxy model composites , 1995 .

[5]  Liu Yang,et al.  The influence of thermo-oxidative degradation on the measured interface strength of glass fibre-polypropylene , 2011 .

[6]  Bernard Miller,et al.  A microbond method for determination of the shear strength of a fiber/resin interface , 1987 .

[7]  James Thomason,et al.  Interfacial strength in thermoplastic composites - at last an industry friendly measurement method? , 2002 .

[8]  H. Wagner,et al.  Residual thermal stresses in three concentric transversely isotropic cylinders: Application to thermoplastic-matrix composites containing a transcrystalline interphase , 1997 .

[9]  S. Hoa,et al.  Determination of Shrinkage and Modulus Development of Thermosetting Resins , 2009 .

[10]  J. Nairn.  Thermoelastic analysis of residual stresses in unidirectional, high‐performance composites , 1985 .

[11]  J. Andreasen,et al.  Thermo-mechanical characterisation of in-plane properties for CSM E-glass epoxy polymer composite materials – Part 1: Thermal and chemical strain , 2013 .

[12]  James Thomason,et al.  Dependence of interfacial strength on the anisotropic fiber properties of jute reinforced composites , 2010 .

[13]  Liu Yang,et al.  The thermal behaviour of glass fibre investigated by thermomechanical analysis , 2013, Journal of Materials Science.

[14]  H. Wagner,et al.  Thermomechanical behaviour of interfacial region in carbon fibre/epoxy composites , 1996 .

[15]  J. Karger‐Kocsis,et al.  Polypropylene : structure, blends and composites , 1995 .

[16]  Liu Yang,et al.  Temperature dependence of the interfacial shear strength in glass–fibre polypropylene composites , 2011 .

[17]  M. Pegoraro,et al.  Evaluation of residual stresses and adhesion in polymer composites , 1996 .

[18]  Li Wenbo,et al.  Interfacial shear strength in carbon fiber‐reinforced poly(phthalazinone ether ketone) composites , 2013 .

[19]  Michael R Wisnom,et al.  In-situ measurement of chemical shrinkage of MY750 epoxy resin by a novel gravimetric method , 2004 .