Constructal design of finned tubes used in air-cooled heat exchangers

The present study documents the constructal design and optimization of finned tubes used in air-cooled heat exchangers. The considered tubes are equipped with annular fins. The aim is to minimize the overall thermal resistance by morphing the geometry. The geometrical and thermo-physical parameters considered are the number of fins, ratio of fin height to tube diameter, Stanton number, ratio of fin conductivity to air conductivity, ratio of in-tube fluid conductivity to air conductivity and dimensionless pressure drop. Two constraints are applied in the optimization process: fixed overall volume of heat exchanger and fixed volume fraction of fin material. It is found that there exist optimal values for the number and the height of fins. Moreover, the optimal heat transfer has an extremum in a special volume fraction of fin material.

[1]  Adrian Bejan,et al.  Constructal trees of circular fins for conductive and convective heat transfer , 1999 .

[2]  A. Bejan.  Shape and Structure, from Engineering to Nature , 2000 .

[3]  P. Cheng,et al.  Heat transfer and pressure drop in fractal tree-like microchannel nets , 2002 .

[4]  Dae-Young Lee,et al.  Cooling enhancement in an air-cooled finned heat exchanger by thin water film evaporation , 2003 .

[5]  Alexandru M. Morega,et al.  A Constructal Approach to the Optimal Design of Photovoltaic Cells , 2005 .

[6]  A. Bejan,et al.  Constructal theory of generation of configuration in nature and engineering , 2006 .

[7]  Adrian Bejan,et al.  Constructing animal locomotion from new thermodynamics theory , 2006 .

[8]  A. H. Reis,et al.  Constructal theory of global circulation and climate , 2006 .

[9]  Tanmay Basak,et al.  Thermal performance of a multi-block heat exchanger designed on the basis of Bejan’s constructal theory , 2008 .

[10]  Luiz Alberto Oliveira Rocha,et al.  Constructal design of T–Y assembly of fins for an optimized heat removal , 2009 .

[11]  Adrian Bejan,et al.  Tree-shaped vascular wall designs for localized intense cooling , 2009 .

[12]  Ho-Sang Ra,et al.  Experimental study on corrugated cross-flow air-cooled plate heat exchangers , 2010 .

[13]  E. Shirani,et al.  Constructal optimization of the geometry of an array of micro-channels☆ , 2011 .

[14]  Arun S. Mujumdar,et al.  The effect of svelteness on the bifurcation angles role in pressure drop and flow uniformity of tree-shaped microchannels , 2011 .

[15]  A. Bejan,et al.  The constructal law and the evolution of design in nature. , 2011, Physics of life reviews.

[16]  Mohammad Reza Salimpour,et al.  Thermodynamic analysis and optimization of air-cooled heat exchangers , 2011 .

[17]  Mohammad Reza Salimpour,et al.  Constructal design of reverting microchannels for convective cooling of a circular disc , 2011 .

[18]  Mohammad Reza Salimpour,et al.  Optimization of highly conductive insert architecture for cooling a rectangular chip , 2012 .

[19]  Chen Lingen.  Progress in study on constructal theory and its applications , 2012 .

[20]  A. Bejan,et al.  Constructal law of design and evolution: Physics, biology, technology, and society , 2013 .

[21]  E. Shirani,et al.  Constructal Optimization of Microchannel Heat Sinks With Noncircular Cross Sections , 2013 .

[22]  Amir Hesam Alinia Kashani,et al.  Thermal-economic optimization of an air-cooled heat exchanger unit , 2013 .

[23]  Farrokh Sharifi,et al.  USING INCOMPLETE VARIABLE CROSS-SECTION HIGHLY CONDUCTIVE INSERTS FOR COOLING A DISC , 2013 .

[24]  Sadegh Poozesh,et al.  Optimal architecture of heat generating pieces in a fin , 2013 .

[25]  Mohammad Reza Salimpour,et al.  Constructal design for cooling a disc-shaped body using incomplete inserts with temperature-dependent thermal conductivities , 2013 .

[26]  Mohammad Reza Salimpour,et al.  Micro- and Nanoscale Conductive Tree-Structures for Cooling a Disk-Shaped Electronic Piece , 2013 .