Diamond emitters fabrication and theory

The fabrication of gated diamond field‐emission cathodes is described and a theory of their operation is discussed. These cathodes are made using commercial diamond grit with the addition of Ni and Cs salts to enhance emission. The resulting structure resembles a field‐emission Spindt cathode with the internal metal cone replaced by a ∼100 nm layer of diamond grit. Emission from these cathodes occurs at the lowest reported gate voltage of any field emission device and is unaffected by operation at pressures of over 100 Pa of N2. Operation in oxygen and H2S at pressures of 6×10−4 Pa degrades emission, but the cathodes recover once the ambient pressure is reduced to below 1×10−4 Pa. The emission current noise is 2.5% rms over an 8 h period and 1% rms over 3 ms. These cathodes suffer from high gate current that varies from 0.2 to 1000 times the emitted current. The high gate current is known to be process dependent and not inherent to the cathodes. The emission performance is explained by the stable negative...