Investigation of the nanomechanical properties in relation to the microstructure of Zn1−xBexTe alloys

A study by nanoindentation has been performed to investigate the variation of the mechanical properties of Zn1−xBexTe alloys as a function of the beryllium content in the range 0≤x≤0.84. Our data show a very marked increase of hardness (H) and a significant increase of the elastic modulus (E) with Be concentration. These trends are related to an increase in the stiffness of the BeTe bond relative to that of the ZnTe bond. Furthermore, discontinuities are unambiguously revealed in the variations of both H and E at the critical Be content of ∼20%. We relate these to Raman studies of the layers’ microstructure and propose an explanation in terms of a percolative behavior.

[1]  M. Tamargo,et al.  Direct-to-indirect band gap crossover for the BexZn1−xTe alloy , 2001 .

[2]  O. Pagès,et al.  Raman study of the random ZnTe–BeTe mixed crystal: Percolation model plus multimode decomposition , 2006 .

[3]  J. Hirth,et al.  Mechanism for dislocation density reduction in GaAs crystals by indium addition , 1985 .

[4]  J. Castaing,et al.  Dislocation multiplication in GaAs : inhibition by doping , 1989 .

[5]  Implantation-produced structural damage in InxGa1-xN , 2001 .

[6]  M. Schenk,et al.  Solid-solution hardening of bulk crystals , 1998 .

[7]  O. Pagès,et al.  Unification of the phonon mode behavior in semiconductor alloys: Theory and ab initio calculations , 2007, 0709.0930.

[8]  Donald S. Gardner,et al.  Plastic properties of thin films on substrates as measured by submicron indentation hardness and substrate curvature techniques , 1986 .

[9]  M. Ashby.  The deformation of plastically non-homogeneous materials , 1970 .

[10]  J. Hirth,et al.  High‐temperature hardness of Ga1−xInxAs , 1986 .

[11]  Eric Tournié,et al.  Nanoindentation study of Zn1−xBexSe heteroepitaxial layers , 2002 .

[12]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[13]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[14]  G. Patriarche,et al.  Solid-solution strengthening in ordered In x Ga1 −  x P alloys , 2004 .

[15]  J. H. Westbrook,et al.  The Science of hardness testing and its research applications : based on papers presented at a symposium of the American Society for Metals, October 18 to 20, 1971 , 1973 .

[16]  J. Barbot,et al.  Microhardness and polarity in CdxHg1−xTe , 1988 .

[17]  M. O. Manasreh,et al.  Structural disorder in ion-implanted AlxGa1−xN , 2002 .

[18]  Huajian Gao,et al.  Indentation size effects in crystalline materials: A law for strain gradient plasticity , 1998 .

[19]  Steve Bull,et al.  On the origins and mechanisms of the indentation size effect , 2003 .

[20]  Michael F. Ashby,et al.  Engineering materials 1: an introduction to their properties and applications , 1996 .

[21]  J. Rabier,et al.  Dislocations and plasticity in semiconductors. II. The relation between dislocation dynamics and plastic deformation , 1987 .

[22]  W. Clegg,et al.  Effect of coherency strain on the deformation of In x Ga1− x As superlattices under nanoindentation and bending , 2005 .

[23]  H. Belmabrouk,et al.  Optoelectronic properties of zinc blende ZnSSe and ZnBeTe alloys , 2005 .

[24]  D. Munz,et al.  Determination of elastic modulus of thin layers using nanoindentation , 1997 .

[25]  G. Reuscher,et al.  Novel beryllium containing II–VI compounds: basic properties and potential applications , 1998 .

[26]  M. Buckley,et al.  Dielectric functions and critical points of BexZn1−xTe alloys measured by spectroscopic ellipsometry , 2002 .