The Use of Metal Filled Via Holes for Improving Isolation in Ltcc RF and Wireless Multichip Packages

LTCC MCM's for RF and wireless systems often use metal filled via holes to improve isolation between the stripline and microstrip interconnects. In this paper, results from a 3D-FEM electromagnetic characterization of microstrip and stripline interconnects with metal filled via fences for isolation are presented. It is shown that placement of a via hole fence closer than three times the substrate height to the transmission lines increases radiation and coupling. Radiation loss and reflections are increased when a short via fence is used in areas suspected of having high radiation. Also, via posts should not be separated by more than three times the substrate height for low radiation loss, coupling, and suppression of higher order modes in a package.

[1]  R. Collin.  Foundations for microwave engineering , 1966 .

[2]  R. L. Brown,et al.  Manufacturing of microwave modules using low-temperature cofired ceramics , 1994, 1994 IEEE MTT-S International Microwave Symposium Digest (Cat. No.94CH3389-4).

[3]  Myung-Kul Kim.  Crosstalk control for microstrip circuits on PCBs at microwave frequencies , 1995, Proceedings of International Symposium on Electromagnetic Compatibility.

[4]  Robert J. Wojnarowski,et al.  Development of a plastic encapsulated multichip technology for high volume, low cost commercial electronics , 1994 .

[5]  R. Wayne Johnson,et al.  Multichip Modules: Systems Advantages, Major Constructions, and Materials Technologies , 1991 .

[6]  George E. Ponchak,et al.  Finite Ground Coplanar (FGC) Waveguide: A Better Transmission Line for Microwave Circuits , 1998 .

[7]  Ravender Goyal,et al.  Monolithic microwave integrated circuits: Technology and design , 1989 .

[8]  Nicolaos G. Alexopoulos,et al.  Frequency-independent equivalent circuit model for microstrip open-end and gap discontinuities , 1994 .

[9]  Kazuaki Takahashi,et al.  A novel millimeter-wave IC on Si substrate using flip-chip bonding technology , 1994, 1994 IEEE MTT-S International Microwave Symposium Digest (Cat. No.94CH3389-4).

[10]  George E. Ponchak,et al.  Filled via hole fences for crosstalk control of microstrip lines in LTCC packages , 1998 .

[11]  Jong-Gwan Yook,et al.  Characterization of high frequency interconnects using finite difference time domain and finite element methods , 1994 .

[12]  Jong-Gwan Yook,et al.  Characterization of plated via hole fences for isolation between stripline circuits in LTCC packages , 1998, 1998 IEEE MTT-S International Microwave Symposium Digest (Cat. No.98CH36192).

[13]  Eric D. Perfecto,et al.  Large format fabrication-a practical approach to low cost MCM-D , 1995 .