Characterization of Cr‐doped Sb2Te3 films and their application to phase‐change memory

Phase-change memory (PCM) is regarded as one of the most promising candidates for the next-generation nonvolatile memory. Its storage medium, phase-change material, has attracted continuous exploration. Along the traditional GeTe–Sb2Te3 tie line, the binary compound Sb2Te3 is a high-speed phase-change material matrix. However, the low crystallization temperature prevents its practical application in PCM. Here, Cr is doped into Sb2Te3, called Cr–Sb2Te3 (CST), to improve the thermal stability. We find that, with increase of the Cr concentration, grains are obviously refined. However, all the CST films exhibit a single hexagonal phase as Sb2Te3 without phase separation. Also, the Cr helps to inhibit oxidation of Sb atoms. For the selected film CST_10.5, the resistance ratio between amorphous and crystalline states is more than two orders of magnitude; the temperature for 10-year data retention is 120.8 °C, which indicates better thermal stability than GST and pure Sb2Te3. PCM cells based on CST_10.5 present small threshold current/voltage (4 μA/0.67 V). In addition, the cell can be operated by a low SET/RESET voltage pulse (1.1 V/2.4 V) with 50 ns width. Thus, Cr–Sb2Te3 with suitable composition is a promising novel phase-change material used for PCM with high speed and good thermal stability performances. (© 2015 WILEY-VCH Verlag GmbH &Co. KGaA, Weinheim)

[1]  Ctirad Uher,et al.  Thin film dilute ferromagnetic semiconductors Sb 2 − x Cr x Te 3 with a Curie temperature up to 190 K , 2006 .

[2]  Songlin Feng,et al.  CrxSb2Te1 materials for phase change memory with high speed and good thermal stability performance , 2015, Journal of Materials Science: Materials in Electronics.

[3]  Ming-Jinn Tsai,et al.  Ga2Te3Sb5—A Candidate for Fast and Ultralong Retention Phase‐Change Memory , 2009 .

[4]  K. Gopalakrishnan,et al.  Phase change memory technology , 2010, 1001.1164.

[5]  M. Salinga,et al.  Phase-Change Memories on a Diet , 2011, Science.

[6]  Simone Raoux,et al.  Nanoscale nuclei in phase change materials: Origin of different crystallization mechanisms of Ge2Sb2Te5 and AgInSbTe , 2014 .

[7]  F. Rao,et al.  High thermal stability and low density variation of carbon-doped Ge2Sb2Te5 for phase-change memory application , 2014 .

[8]  Songlin Feng,et al.  Advantages of SiSb phase-change material and its applications in phase-change memory , 2007 .

[9]  L. V. Pieterson,et al.  Phase-change recording materials with a growth-dominated crystallization mechanism: A materials overview , 2005 .

[10]  Sumio Hosaka,et al.  Characterization of nitrogen-doped Sb2Te3 films and their application to phase-change memory , 2007 .

[11]  Investigation of phase transition behaviors of the nitrogen-doped Sb-rich Si-Sb-Te films for phase-change memory , 2011 .

[12]  Bomy Chen,et al.  Characteristics of chalcogenide nonvolatile memory nano-cell-element based on Sb2Te3 material , 2005 .

[13]  Bo Liu,et al.  Al1.3Sb3Te material for phase change memory application , 2011 .

[14]  A. Kellock,et al.  Effect of Al and Cu doping on the crystallization properties of the phase change materials SbTe and GeSb , 2007 .

[15]  Sunglae Cho,et al.  Magnetic properties of Mn‐doped Bi2Te3 and Sb2Te3 , 2004 .

[16]  Man Young Sung,et al.  Effects of excess Sb on crystallization of δ‐phase SbTe binary thin films , 2008 .

[17]  Jorge O. Sofo,et al.  Stress-induced defects in Sb 2 Te 3 , 2003 .

[18]  Songlin Feng,et al.  Uniform Ti-doped Sb2Te3 materials for high-speed phase change memory applications , 2014 .

[19]  D. Ielmini,et al.  Reliability study of phase-change nonvolatile memories , 2004, IEEE Transactions on Device and Materials Reliability.

[20]  Linus Pauling,et al.  Atomic Radii and Interatomic Distances in Metals , 1947 .