Numerical Simulation of Metal Vapour Behavior in Double Electrodes TIG Welding
暂无分享,去创建一个
[1] A. Murphy,et al. Mixing of multiple metal vapours into an arc plasma in gas tungsten arc welding of stainless steel , 2017 .
[2] Matthias Finkbeiner,et al. Environmental energy efficiency of single wire and tandem gas metal arc welding , 2017, Welding in the World.
[3] M. Baeva. Non-equilibrium Modeling of Tungsten-Inert Gas Arcs , 2017, Plasma Chemistry and Plasma Processing.
[4] U. Reisgen,et al. Two-dimensional arc stagnation pressure measurements for the double-electrode GTAW process , 2016 .
[5] U. Reisgen,et al. Numerical study of the anode boundary layer in atmospheric pressure arc discharges , 2016 .
[6] D. Fan,et al. Numerical simulation of arc plasma and weld pool in double electrodes tungsten inert gas welding , 2015 .
[7] Jiankang Huang,et al. A unified model of coupled arc plasma and weld pool for double electrodes TIG welding , 2014 .
[8] Y. Hirata,et al. Study on temperature measurement of two-electrode TIG arc plasma , 2015 .
[9] Anthony B. Murphy,et al. Influence of metal vapour on arc temperatures in gas–metal arc welding: convection versus radiation , 2013 .
[10] Y. Hirata,et al. Numerical analysis of arc plasma and weld pool formation by a tandem TIG arc , 2013, Welding in the World.
[11] Manabu Tanaka,et al. Study for TIG-MIG Hybrid Welding Process , 2013 .
[12] Lin Wu,et al. Effect of process parameters on temperature distribution in twin-electrode TIG coupling arc , 2012 .
[13] Yosuke Ogino,et al. Numerical analysis of the heat source characteristics of a two-electrode TIG arc , 2011 .
[14] J. Lowke,et al. Time-dependent calculations of molten pool formation and thermal plasma with metal vapour in gas tungsten arc welding , 2010 .
[15] Anthony B. Murphy,et al. The effects of metal vapour in arc welding , 2010 .
[16] Jun Xiong,et al. Spectroscopic diagnostics of temperatures for a non-axisymmetric coupling arc by monochromatic imaging , 2010 .
[17] M. Hertel,et al. Metal vapour causes a central minimum in arc temperature in gas–metal arc welding through increased radiative emission , 2010 .
[18] Joachim V. R. Heberlein,et al. The anode region of electric arcs: a survey , 2010 .
[19] J. Lowke,et al. Modelling of thermal plasmas for arc welding: the role of the shielding gas properties and of metal vapour , 2009 .
[20] YuMing Zhang,et al. Double-electrode GMAW process and control : A novel welding process adds a GTAW torch to a conventional GMAW system to create a bypass arc for increasing melting current while controlling base current , 2007 .
[21] X. Leng,et al. The characteristic of twin-electrode TIG coupling arc pressure , 2006 .
[22] YuMing Zhang,et al. Double-Electrode GMAW Process and Control , 2006 .
[23] M. Ushio,et al. Practical Application of High Efficiency Twin-Arc TIG Welding Method (Sedar-TIG) for Pclng Storage Tank , 2004 .
[24] Pierre Freton,et al. A numerical modelling of an electric arc and its interaction with the anode: Part I. The two-dimensional model , 2004 .
[25] J. Tušek,et al. High-productivity multiple-wire submerged-arc welding and cladding with metal-powder addition , 2003 .
[26] J. Menart,et al. Net emission coefficients for argon-iron thermal plasmas , 2002 .
[27] J. Menart,et al. Numerical Study of a Free-Burning Argon Arc with Copper Contamination from the Anode , 1999 .
[28] M. Razafinimanana,et al. Experimental study of the influence of anode ablation on the characteristics of an argon transferred arc , 1995 .
[29] A. Murphy. Transport coefficients of air, argon-air, nitrogen-air, and oxygen-air plasmas , 1995 .
[30] A. Murphy,et al. Transport coefficients of argon, nitrogen, oxygen, argon-nitrogen, and argon-oxygen plasmas , 1994, Plasma Chemistry and Plasma Processing.
[31] T. DebRoy,et al. Surface tension of binary metal—surface active solute systems under conditions relevant to welding metallurgy , 1988 .
[32] Lawrence E. Cram,et al. Statistical evaluation of radiative power losses from thermal plasmas due to spectral lines , 1985 .