Modeling of a pre-strained circular actuator made of dielectric elastomers

Dielectric elastomers are used for the realization of actuators with large deformations and belong to the group of so-called electroactive polymers (EAP). Models are required for the design and optimization of EAP actuators. Thereby the constitutive behavior of the elastomer is of crucial importance and typically uniaxial experiments are performed in order to determine the mechanical properties of these materials. In this paper a pre-strained circular actuator made of a dielectric elastomer is investigated: constitutive models based on uniaxial data are verified by comparing calculation results with experimental observations. An analytical model is derived for the instantaneous response to an activation voltage in the pre-strained circular actuator and a finite element model is used to simulate the time-dependent behavior. Hyperelastic models are used and three strain energy formulations (Yeoh, Ogden and Mooney-Rivlin) are compared in their predictive capabilities. The results of the calculations with the three strain energy forms differ significantly, although all forms were successfully fitted to the same uniaxial data set. Predictions of the actuator behavior with the Yeoh form agree to a great extent with the measurements. The results of the present work show that the circular actuator set-up represents a valid model system for the characterization and optimization of the electromechanical behavior of dielectric elastomers.

[1]  Edoardo Mazza,et al.  Modeling and simulation of dielectric elastomer actuators , 2005 .

[2]  Jaedo Nam,et al.  Actuator model of electrostrictive polymers (EPs) for microactuators , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[3]  Y. Fung,et al.  Biomechanics: Mechanical Properties of Living Tissues , 1981 .

[4]  Q. Pei,et al.  High-speed electrically actuated elastomers with strain greater than 100% , 2000, Science.

[5]  D. De Rossi,et al.  Electromechanical characterisation of dielectric elastomer planar actuators: comparative evaluation of different electrode materials and different counterloads , 2003 .

[6]  Richard Heydt,et al.  Applications of dielectric elastomer actuators , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  Yoseph Bar-Cohen,et al.  Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges, Second Edition , 2004 .

[8]  R. Pelrine,et al.  Electrostriction of polymer dielectrics with compliant electrodes as a means of actuation , 1998 .

[9]  Peter Sommer-Larsen,et al.  Performance of dielectric elastomer actuators and materials , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[10]  Silvain Michel,et al.  Dielectric Elastomer Actuators for A Portable Force Feedback Device , 2004 .

[11]  M. Mooney.  A Theory of Large Elastic Deformation , 1940 .

[12]  M. Sato.  [Mechanical properties of living tissues]. , 1986, Iyo denshi to seitai kogaku. Japanese journal of medical electronics and biological engineering.

[13]  Ron Pelrine,et al.  High-Strain Actuator Materials Based on Dielectric Elastomers , 2000 .

[14]  Guggi Kofod,et al.  Dielectric elastomer actuators , 2001 .

[15]  O. Yeoh.  Some Forms of the Strain Energy Function for Rubber , 1993 .

[16]  Danilo De Rossi,et al.  Dielectric elastomer cylindrical actuators: electromechanical modelling and experimental evaluation , 2004 .

[17]  R. Ogden.  Large deformation isotropic elasticity – on the correlation of theory and experiment for incompressible rubberlike solids , 1972, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[18]  O. H. Yeoh,et al.  Characterization of Elastic Properties of Carbon-Black-Filled Rubber Vulcanizates , 1990 .

[19]  R. Pelrine,et al.  Actuation Response of Polyacrylate Dielectric Elastomers , 2003 .

[20]  K. N. Sawyers,et al.  Nonlinear Continuum Mechanics of Viscoelastic Fluids , 1971 .