A Novel Hybrid MPPT Controller Based on Bond Graph and Fuzzy Logic in Proton Exchange Membrane Fuel Cell System: Experimental Validation

[1]  Saad Mekhilef,et al.  Bond graph modeling, design and experimental validation of a photovoltaic/fuel cell/ electrolyzer/battery hybrid power system , 2021, International Journal of Hydrogen Energy.

[2]  K. Sundararaju,et al.  ANN-Based MPPT Controller for PEM Fuel Cell Energized Interleaved Resonant PWM High Step Up DC-DC Converter with SVPWM Inverter Fed Induction Motor Drive , 2021, Iranian Journal of Science and Technology, Transactions of Electrical Engineering.

[3]  C. Gowri Shankar,et al.  High-performance single-input three-output DC–DC high gain converter for fuel cell-based electric vehicles , 2020 .

[4]  Héctor Alaiz-Moretón,et al.  Hydrogen consumption prediction of a fuel cell based system with a hybrid intelligent approach , 2020, Energy.

[5]  Venkata Suresh Patnaikuni,et al.  Performance Comparison of PEM Fuel Cell with Enhanced Cross-Flow Split Serpentine and Single Serpentine Flow Field Designs , 2020, Arabian Journal for Science and Engineering.

[6]  Ramulu Chinthamalla,et al.  A hybrid global maximum power point tracking method based on butterfly particle swarm optimization and perturb and observe algorithms for a photovoltaic system under partially shaded conditions , 2020 .

[7]  Hegazy Rezk,et al.  A novel strategy based on salp swarm algorithm for extracting the maximum power of proton exchange membrane fuel cell , 2020 .

[8]  A. Alice Hepzibah,et al.  ANFIS current–voltage controlled MPPT algorithm for solar powered brushless DC motor based water pump , 2020 .

[9]  S. DeCaluwe,et al.  Physically Based Modeling of PEMFC Cathode Catalyst Layers: Effective Microstructure and Ionomer Structure–Property Relationship Impacts , 2020 .

[10]  Shihua Liu,et al.  A two-dimensional analytical model of PEMFC with dead-ended anode , 2020 .

[11]  A. Coban,et al.  Performance Improvement of a Single PEM Fuel Cell Using an Innovative Flow Field Design Methodology , 2020 .

[12]  N. Genç,et al.  Design and application of PEM fuel cell-based cascade boost converter , 2019, Electrical Engineering.

[13]  A. Sasmito,et al.  Advances in proton exchange membrane fuel cell with dead-end anode operation: A review , 2019, Applied Energy.

[14]  Po-Ya Abel Chuang,et al.  Development of 1-D multiphysics PEMFC model with dry limiting current experimental validation , 2019, Electrochimica Acta.

[15]  Vineet Kumar,et al.  A Novel dPdI feedback based control scheme using GWO tuned PID controller for efficient MPPT of PEM fuel cell. , 2019, ISA transactions.

[16]  Eklas Hossain,et al.  A Hybrid Photovoltaic-Fuel Cell for Grid Integration With Jaya-Based Maximum Power Point Tracking: Experimental Performance Evaluation , 2019, IEEE Access.

[17]  Atanda K. Raji,et al.  Fuzzy Rule-Based and Particle Swarm Optimisation MPPT Techniques for a Fuel Cell Stack , 2019, Energies.

[18]  Hussain Shareef,et al.  Dynamic temperature model for proton exchange membrane fuel cell using online variations in load current and ambient temperature , 2019, International Journal of Green Energy.

[19]  Mohamed Derbeli,et al.  A Robust Maximum Power Point Tracking Control Method for a PEM Fuel Cell Power System , 2018, Applied Sciences.

[20]  Nisrine Naseri,et al.  Proton Exchange Membrane Fuel Cell Modelling and Power Control by P&O Algorithm , 2018, 2018 6th International Renewable and Sustainable Energy Conference (IRSEC).

[21]  Shashikant,et al.  Comparison of SCA-Optimized PID and P&O-Based MPPT for an Off-grid Fuel Cell System , 2018, Soft Computing in Data Analytics.

[22]  Mansour Souissi,et al.  Modeling and control of photovoltaic and fuel cell based alternative power systems , 2018, International Journal of Hydrogen Energy.

[23]  Adélio Mendes,et al.  Three-dimensional modeling of PEMFC with contaminated anode fuel , 2018, Energy.

[24]  Aditya Raj,et al.  An ANFIS Based MPPT Controller for Fuel Cell Powered Induction Motor Drive , 2018, 2018 International Conference on Smart Grid and Clean Energy Technologies (ICSGCE).

[25]  Sarita Samal,et al.  Modeling and simulation of interleaved boost converter with MPPT for fuel cell application , 2018, 2018 Technologies for Smart-City Energy Security and Power (ICSESP).

[26]  Abdelghani Harrag,et al.  How fuzzy logic can improve PEM fuel cell MPPT performances , 2018 .

[27]  Neeraj Priyadarshi,et al.  A Hybrid Firefly-Asymmetrical Fuzzy Logic Controller based MPPT for PV-Wind-Fuel Grid Integration , 2017, International Journal of Renewable Energy Research.

[28]  Sh. Abdi,et al.  Maximum power point tracking of a proton exchange membrane fuel cell system using PSO-PID controller , 2017 .

[29]  B. O. Bouamama,et al.  Dynamic and multiphysic PEM electrolysis system modelling: A bond graph approach , 2017 .

[30]  Abdelghani Harrag,et al.  Novel neural network IC-based variable step size fuel cell MPPT controller: Performance, efficiency and lifetime improvement , 2017 .

[31]  Luis J. Morales-Mendoza,et al.  A novel DC-DC multilevel SEPIC converter for PEMFC systems , 2016 .

[32]  Sabri Camur,et al.  Modeling and analysis of DC-DC SEPIC converter with coupled inductors , 2016, 2016 International Symposium on Industrial Electronics (INDEL).

[33]  Meng-Hui Wang,et al.  Maximum power point tracking control method for proton exchange membrane fuel cell , 2016 .

[34]  Belkacem Ould Bouamama,et al.  Modeling, simulation and hardware implementation of a bond graph-maximum power point tracker for a photovoltaic panel under partially shaded conditions , 2016, Simul..

[35]  Oguz Emrah Turgut,et al.  Optimal proton exchange membrane fuel cell modelling based on hybrid Teaching Learning Based Optimization – Differential Evolution algorithm , 2016 .

[36]  Esam H. Ismail,et al.  High voltage step-up integrated double Boost–Sepic DC–DC converter for fuel-cell and photovoltaic applications , 2015 .

[37]  Pang-Chia Chen,et al.  Robust Integral Voltage Tracking Control for PEM Fuel Cell Systems Under Varying Operating Current , 2014 .

[38]  A. Chih-Chiang Hua,et al.  Design of a wide input range DC/DC converter based on SEPIC topology for fuel cell power conversion , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[39]  E.H. Ismail,et al.  An Improved Topology of SEPIC Converter With Reduced Output Voltage Ripple , 2008, IEEE Transactions on Power Electronics.

[40]  Loganathan Umanand,et al.  Modelling of switching systems in bond graphs using the concept of switched power junctions , 2005, J. Frankl. Inst..

[41]  J. U. Thoma,et al.  Advances in bond graph modelling: theory, software, applications , 1995 .

[42]  G. Dauphin-Tanguy,et al.  Bond-Graph Approach of Commutation Phenomena , 1989 .

[43]  Kamel Besbes,et al.  Bond graph based automated modeling of switch-mode power converters using VHDL-AMS , 2017, 2017 International Conference on Control, Automation and Diagnosis (ICCAD).

[44]  Jan Top,et al.  Variable Causality in Bond Graphs Caused by Discrete Effects , 1992 .