Influence of heat treatment on the tool life while machining SLM Inconel 718 with reference to C&W Inconel 718

[1]  K. Gruber,et al.  Mechanical properties of Inconel 718 additively manufactured by laser powder bed fusion after industrial high-temperature heat treatment , 2022, Journal of Manufacturing Processes.

[2]  E. Hryha,et al.  The role of microstructural characteristics of additively manufactured alloy 718 on tool wear in machining , 2021, International Journal of Machine Tools and Manufacture.

[3]  Zhanqiang Liu,et al.  Microstructure and machinability evaluation in micro milling of selective laser melted Inconel 718 alloy , 2021 .

[4]  Liang Huang,et al.  Effect of heat treatment on the microstructure evolution and mechanical behaviour of a selective laser melted Inconel 718 alloy , 2021, Journal of Alloys and Compounds.

[5]  G. Fromentin,et al.  New mechanistic cutting force model for milling additive manufactured Inconel 718 considering effects of tool wear evolution and actual tool geometry , 2021 .

[6]  Yusheng Shi,et al.  Investigation on the influence of heat treatment on Inconel 718 fabricated by selective laser melting: Microstructure and high temperature tensile property , 2021 .

[7]  M. Elbestawi,et al.  On selective laser melting of Inconel 718: Densification, surface roughness, and residual stresses , 2020 .

[8]  Zhanqiang Liu,et al.  On machinability and surface integrity in subsequent machining of additively-manufactured thick coatings: A review , 2020 .

[9]  M. A. Xavior,et al.  Selection of machining condition on surface integrity of additive and conventional Inconel 718 , 2020 .

[10]  V. Popovich,et al.  A review of mechanical properties of additively manufactured Inconel 718 , 2019 .

[11]  D. Gu,et al.  Effect of post heat treatment on microstructure and mechanical properties of Ni-based composites by selective laser melting , 2019, Materials Science and Engineering: A.

[12]  Qiuhong Jiang,et al.  Influence of energy density on macro/micro structures and mechanical properties of as-deposited Inconel 718 parts fabricated by laser engineered net shaping , 2019, Journal of Manufacturing Processes.

[13]  Peng Liu,et al.  Microstructural evolution and phase transformation of Inconel 718 alloys fabricated by selective laser melting under different heat treatment , 2019, Journal of Manufacturing Processes.

[14]  J. Cormier,et al.  Machining influence on the fatigue resistance of Inconel 718 fabricated by Selective Laser Melting (SLM) , 2019, Procedia Structural Integrity.

[15]  R. Wagener,et al.  Effects of different heat treatments on the cyclic material behavior of additively manufactured Inconel®718 , 2019, Procedia Structural Integrity.

[16]  M. Manohar,et al.  Experimental investigation of work hardening, residual stress and microstructure during machining Inconel 718 , 2017 .

[17]  Lauren L. Beghini,et al.  Additive manufacturing: Toward holistic design , 2017 .

[18]  Zhanqiang Liu,et al.  Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry cutting of Ti-6Al-4V , 2017 .

[19]  A. Kara,et al.  Wear behavior of solid SiAlON milling tools during high speed milling of Inconel 718 , 2017 .

[20]  J. Moverare,et al.  Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments , 2017 .

[21]  Yuebin B. Guo,et al.  Interfacial phenomena and characteristics between the deposited material and substrate in selective laser melting Inconel 625 , 2017 .

[22]  W. M. Tucho,et al.  Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment , 2017 .

[23]  M. A. Xavior,et al.  Tool Wear Assessment During Machining of Inconel 718 , 2017 .

[24]  S. Newman,et al.  Hybrid Cooling and Lubricating Technology for CNC Milling of Inconel 718 Nickel Alloy , 2017 .

[25]  U. Glatzel,et al.  Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting , 2016 .

[26]  S. Gangopadhyay,et al.  State-of-the-art in surface integrity in machining of nickel-based super alloys , 2016 .

[27]  Dongyun Zhang,et al.  Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy , 2015 .

[28]  U. Glatzel,et al.  Mechanical and Microstructural Investigation of Nickel‐Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM) , 2015 .

[29]  Yuebin Guo,et al.  Effect Tool Wear During End Milling on the Surface Integrity and Fatigue Life of Inconel 718 , 2014 .

[30]  J. Ståhl,et al.  Surface Integrity and the Influence of Tool Wear in High Speed Machining of Inconel 718 , 2013 .

[31]  Dahu Zhu,et al.  Tool wear characteristics in machining of nickel-based superalloys , 2013 .

[32]  Vimal Dhokia,et al.  Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids , 2012 .

[33]  Ming Gao,et al.  The microstructure and mechanical properties of deposited-IN718 by selective laser melting , 2012 .

[34]  S. Ringer,et al.  Precipitation and clustering in the early stages of ageing in Inconel 718 , 2010 .

[35]  Keith Ridgway,et al.  Optimisation of tool life and productivity when end milling inconel 718TM , 2007 .

[36]  Tuğrul Özel,et al.  A Methodology to Determine Work Material Flow Stress and Tool-Chip Interfacial Friction Properties by Using Analysis of Machining , 2006 .

[37]  A. Moufki,et al.  A review of developments towards dry and high speed machining of Inconel 718 alloy , 2004 .

[38]  S. Sharif,et al.  Cutting performance and wear characteristics of PVD coated and uncoated carbide tools in face milling Inconel 718 aerospace alloy , 2001 .