PEM fuel cell relative humidity (RH) and its effect on performance at high temperatures
暂无分享,去创建一个
Hui Li | Yanghua Tang | Zetao Xia | Chaojie Song | Jianlu Zhang | Jiujun Zhang | Jianlu Zhang | Z. Xia | Haijiang Wang | Hui Li | Yanghua Tang | Chaojie Song | Haijiang Wang | Jiujun Zhang
[1] T. Ohsaka,et al. Exploring the effects of symmetrical and asymmetrical relative humidity on the performance of H2/air PEM fuel cell at different temperatures , 2007 .
[2] James M. Fenton,et al. Investigation of platinum oxidation in PEM fuel cells at various relative humidities , 2007 .
[3] D. Desmarteau,et al. Proton Conductivity in Nafion® 117 and in a Novel Bis[(perfluoroalkyl)sulfonyl]imide Ionomer Membrane , 1998 .
[4] Vijay Ramani,et al. Stabilized composite membranes and membrane electrode assemblies for elevated temperature/low relative humidity PEFC operation , 2005 .
[5] James M. Fenton,et al. Investigation of membrane property and fuel cell behavior with sulfonated poly(ether ether ketone) electrolyte: Temperature and relative humidity effects , 2005 .
[6] C. Gardner,et al. Studies on ion-exchange membranes. Part 1. Effect of humidity on the conductivity of Nafion® , 1996 .
[7] Yanghua Tang,et al. Polybenzimidazole-membrane-based PEM fuel cell in the temperature range of 120–200 °C , 2007 .
[8] Wei-Mon Yan,et al. Humidity of reactant fuel on the cell performance of PEM fuel cell with baffle-blocked flow field designs , 2006 .
[9] In-Hwan Oh,et al. Effects of cathode open area and relative humidity on the performance of air-breathing polymer electrolyte membrane fuel cells , 2006 .
[10] M. Ciureanu. Effects of Nafion® Dehydration in PEM Fuel Cells , 2004 .
[11] J. C. Amphlett,et al. Performance modeling of the Ballard Mark IV solid polymer electrolyte fuel cell. II: Empirical model development , 1995 .
[12] James M. Fenton,et al. Influence of temperature and relative humidity on performance and CO tolerance of PEM fuel cells with Nafion®–Teflon®–Zr(HPO4)2 higher temperature composite membranes , 2006 .
[13] Yanghua Tang,et al. PEM fuel cell open circuit voltage (OCV) in the temperature range of 23 °C to 120 °C , 2006 .
[14] James M. Fenton,et al. Effect of Elevated Temperature and Reduced Relative Humidity on ORR Kinetics for PEM Fuel Cells , 2005 .
[15] Hubert A. Gasteiger,et al. Effect of Relative Humidity on Oxygen Reduction Kinetics in a PEMFC , 2005 .
[16] D. Wilkinson,et al. Aging mechanisms and lifetime of PEFC and DMFC , 2004 .
[17] T. Springer,et al. A microelectrode study of oxygen reduction at the platinum-recast-nafion film interface , 1992 .
[18] Thomas F. Fuller,et al. Experimental Determination of the Transport Number of Water in Nafion 117 Membrane , 1992 .
[19] G. Anilkumar,et al. Proton conducting phosphated zirconia–sulfonated polyether sulfone nanohybrid electrolyte for low humidity, wide-temperature PEMFC operation , 2006 .
[20] Eiji Endoh,et al. Degradation study of MEA for PEMFCs under low humidity conditions , 2004 .
[21] Ravindra Datta,et al. Performance analysis and impedance spectral signatures of high temperature PBI–phosphoric acid gel membrane fuel cells , 2006 .
[22] S. H. Kim,et al. Improvement of low-humidity performance of PEMFC by addition of hydrophilic SiO2 particles to catalyst layer , 2006 .
[23] Jingrong Yu,et al. In Situ Analysis of Performance Degradation of a PEMFC under Nonsaturated Humidification , 2005 .
[24] Tetsuo Sakai,et al. Gas Diffusion in the Dried and Hydrated Nafions , 1986 .
[25] James Larminie,et al. Fuel Cell Systems Explained , 2000 .
[26] Hui Xu,et al. Analysis of proton exchange membrane fuel cell polarization losses at elevated temperature 120 °C and reduced relative humidity , 2007 .
[27] T. Abe,et al. Study of PEFCs by AC Impedance, Current Interrupt, and Dew Point Measurements I. Effect of Humidity in Oxygen Gas , 2004 .
[28] P. Ekdunge,et al. Proton Conductivity of Nafion 117 as Measured by a Four‐Electrode AC Impedance Method , 1996 .
[29] Jing Li,et al. PEM fuel cell reaction kinetics in the temperature range of 23–120 °C , 2007 .
[30] E. Chalkova,et al. Effect of TiO2 Surface Properties on Performance of Nafion-Based Composite Membranes in High Temperature and Low Relative Humidity PEM Fuel Cells , 2005 .
[31] Jing Li,et al. Temperature Dependent Performance and In Situ AC Impedance of High-Temperature PEM Fuel Cells Using the Nafion-112 Membrane , 2006 .
[32] Serguei N. Lvov,et al. Nafion ∕ TiO2 Proton Conductive Composite Membranes for PEMFCs Operating at Elevated Temperature and Reduced Relative Humidity , 2005 .
[33] Ronghuan He,et al. The CO Poisoning Effect in PEMFCs Operational at Temperatures up to 200°C , 2003 .
[34] Xuan Cheng,et al. PEM fuel cells operated at 0% relative humidity in the temperature range of 23–120 °C , 2007 .
[35] P. Ekdunge,et al. Oxygen and hydrogen permeation properties and water uptake of Nafion® 117 membrane and recast film for PEM fuel cell , 1997 .
[36] Harvey G. Stenger,et al. Flow rate and humidification effects on a PEM fuel cell performance and operation , 2007 .
[37] David P. Wilkinson,et al. High temperature PEM fuel cells , 2006 .
[38] In-Hwan Oh,et al. Effect of the ionomers in the electrode on the performance of PEMFC under non-humidifying conditions , 2004 .
[39] J. Maruyama,et al. Performance of PEFC Formed by Using Pt-Loaded Activated Carbon under High- and Low-Humidity Conditions , 2006 .
[40] Shimshon Gottesfeld,et al. The Water Content Dependence of Electro-Osmotic Drag in Proton-Conducting Polymer Electrolytes , 1995 .
[41] H. Toghiani,et al. Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes , 2006 .