Processing of aqueous tape-casting of alumina with acrylic emulsion binders
暂无分享，去创建一个
T. Chartier | C. Pagnoux | F. Doreau | J. Ferreira | G. Tarì
[1] J. Lewis,et al. Rheological Property and Stress Development during Drying of Tape‐Cast Ceramic Layers , 1996 .
[2] X. Tang,et al. Acrylic emulsion binder for tape casting , 1996 .
[3] Xun Tang,et al. Aqueous Emulsion Acrylic Binders for Low-Foaming Ceramic Slips , 1996 .
[4] P. Greil,et al. Review: aqueous tape casting of ceramic powders , 1995 .
[5] M. Cima,et al. Drying of Granular Ceramic Films: II, Drying Stress and Saturation Uniformity , 1993 .
[6] M. Cima,et al. Drying of Granular Ceramic Films: I, Effect of Processing Variables on Cracking Behavior , 1993 .
[7] T. Hyatt. Electronics : tape casting, roll compaction , 1995 .
[8] T. Chartier,et al. Laminar ceramic composites , 1995 .
[9] T. Chartier,et al. Aqueous tape casting of alumina substrates , 1993 .
[10] R. Moreno. The role of slip additives in tape-casting technology. I: Solvents and dispersants , 1992 .
[11] R. Moreno. The role of slip additives in tape casting technology. II: Binders and plasticizers , 1992 .
[12] T. Chartier,et al. Preparation and characterization of tape cast aluminum nitride substrates , 1992 .
[13] George W. Scherer,et al. Theory of Drying , 1990 .
[14] G. Scherer. Drying gels. II: Film and flat plate , 1987 .
[15] E. P. Hyatt,et al. Making thin, flat ceramics ― a review , 1986 .
[16] Larry L. Hench,et al. Ceramic Processing before Firing , 1978 .