Effect of sonochemistry: Li- and Mn-rich layered high specific capacity cathode materials for Li-ion batteries

[1]  Vinod Kumar,et al.  Dopant distribution and influence of sonication temperature on the pure red light emission of mixed oxide phosphor for solid state lighting. , 2016, Ultrasonics sonochemistry.

[2]  D. Aurbach,et al.  Sonochemical synthesis of LiNi0.5Mn1.5O4 and its electrochemical performance as a cathode material for 5 V Li-ion batteries. , 2015, Ultrasonics sonochemistry.

[3]  D. Aurbach,et al.  Effect of Fe in suppressing the discharge voltage decay of high capacity Li-rich cathodes for Li-ion batteries , 2015, Journal of Solid State Electrochemistry.

[4]  Christopher S. Johnson,et al.  Aluminum and Gallium Substitution into 0.5Li2MnO3·0.5Li(Ni0.375Mn0.375Co0.25)O2 Layered Composite and the Voltage Fade Effect , 2015 .

[5]  D. Aurbach,et al.  Understanding the Effect of Lithium Bis(oxalato) Borate (LiBOB) on the Structural and Electrochemical Aging of Li and Mn Rich High Capacity Li1.2Ni0.16Mn0.56Co0.08O2 Cathodes , 2015 .

[6]  Pengjian Zuo,et al.  An Li-rich oxide cathode material with mosaic spinel grain and a surface coating for high performance Li-ion batteries , 2014 .

[7]  D. Aurbach,et al.  Electrochemical and structural characterization of carbon coated Li1.2Mn0.56Ni0.16Co0.08O2 and Li1.2Mn0.6Ni0.2O2 as cathode materials for Li-ion batteries , 2014 .

[8]  Jin Xue,et al.  Excellent rate capability of Mg doped Li[Li0.2Ni0.13Co0.13Mn0.54]O2 cathode material for lithium-ion battery , 2014 .

[9]  B. Scrosati,et al.  A new, high energy Sn-C/Li[Li(0.2)Ni(0.4)/3Co(0.4)/3Mn(1.6/3)]O2 lithium-ion battery. , 2014, ACS applied materials & interfaces.

[10]  Qi Li,et al.  K(+)-doped Li(1.2)Mn(0.54)Co(0.13)Ni(0.13)O2: a novel cathode material with an enhanced cycling stability for lithium-ion batteries. , 2014, ACS applied materials & interfaces.

[11]  Kai Xie,et al.  Effect of Annealing on the First-Cycle Performance and Reversible Capabilities of Lithium-Rich Layered Oxide Cathodes , 2014 .

[12]  Youyuan Huang,et al.  Improved electrochemical performance of the Li1.2Ni0.13Co0.13Mn0.54O2 wired by CNT networks for lithium-ion batteries , 2014 .

[13]  A. Gedanken,et al.  Sonochemical synthesis, structural, magnetic and grain size dependent electrical properties of NdVO4 nanoparticles. , 2014, Ultrasonics sonochemistry.

[14]  G. Yin,et al.  Ethanol-assisted hydrothermal synthesis of LiNi0.5Mn1.5O4 with excellent long-term cyclability at high rate for lithium-ion batteries , 2014 .

[15]  Yongyao Xia,et al.  Improving the electrochemical performance of layered lithium-rich transition-metal oxides by controlling the structural defects , 2014 .

[16]  N. Munichandraiah,et al.  Polymer Template Assisted Synthesis of Porous Li1.2Mn0.53Ni0.13Co0.13O2 as a High Capacity and High Rate Capability Positive Electrode Material , 2014 .

[17]  Doron Aurbach,et al.  Structural and Electrochemical Evidence of Layered to Spinel Phase Transformation of Li and Mn Rich Layered Cathode Materials of the Formulae xLi[Li1/3Mn2/3]O2.(1-x)LiMn1/3Ni1/3Co1/3O2 (x = 0.2, 0.4, 0.6) upon Cycling , 2014 .

[18]  Bob R. Powell,et al.  Erratum: Structural and Electrochemical Evidence of Layered to Spinel Phase Transformation of Li and Mn Rich Layered Cathode Materials of the Formulae xLi[Li1/3Mn2/3]O2·(1-x)LiMn1/3Ni1/3Co1/3O2 (x = 0.2, 0.4, 0.6) upon Cycling [J. Electrochem. Soc., 161, A1534 (2014)] , 2014 .

[19]  Xinhai Li,et al.  An improved carbonate precipitation method for the preparation of Li1.2Ni0.12Co0.12Mn0.56O2 cathode material , 2014, Ionics.

[20]  N. Perkas,et al.  Eradication of multi-drug resistant bacteria by a novel Zn-doped CuO nanocomposite. , 2013, Small.

[21]  J. Tu,et al.  Preparation and characterization of macroporous Li1.2Mn0.54Ni0.13Co0.13O2 cathode material for lithium-ion batteries via aerogel template , 2013 .

[22]  Yan Huang,et al.  Synthesize and electrochemical characterization of Mg-doped Li-rich layered Li[Li0.2Ni0.2Mn0.6]O2 cathode material , 2013 .

[23]  Jiajun Li,et al.  Effect of amorphous FePO4 coating on structure and electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 as cathode material for Li-ion batteries , 2013 .

[24]  M. Entezari,et al.  Sono-synthesis of bismuth ferrite nanoparticles with high photocatalytic activity in degradation of Rhodamine B under solar light irradiation , 2013 .

[25]  J. Tu,et al.  Enhanced cycling stability of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 by surface modification of MgO with melting impregnation method , 2013 .

[26]  D. Aurbach,et al.  Study of the Lithium-Rich Integrated Compound xLi2MnO3·(1-x)LiMO2 (x around 0.5; M = Mn, Ni, Co; 2:2:1) and Its Electrochemical Activity as Positive Electrode in Lithium Cells , 2013 .

[27]  Doron Aurbach,et al.  Studies of Li and Mn-Rich Lix[MnNiCo]O2 Electrodes: Electrochemical Performance, Structure, and the Effect of the Aluminum Fluoride Coating , 2013 .

[28]  R. Popovitz‐Biro,et al.  Micro- and nano-spheres of low melting point metals and alloys, formed by ultrasonic cavitation. , 2013, Ultrasonics sonochemistry.

[29]  Xueping Gao,et al.  AlF3-coated Li(Li0.17Ni0.25Mn0.58)O2 as cathode material for Li-ion batteries , 2012 .

[30]  Haoshen Zhou,et al.  Initial Coulombic efficiency improvement of the Li1.2Mn0.567Ni0.166Co0.067O2 lithium-rich material by ruthenium substitution for manganese , 2012 .

[31]  A. Pandit,et al.  Room temperature synthesis of crystalline CeO2 nanopowder: advantage of sonochemical method over conventional method. , 2011, Ultrasonics sonochemistry.

[32]  Marshall C. Smart,et al.  Electrochemical Behavior of Layered Solid Solution Li2MnO3−LiMO2 (M = Ni, Mn, Co) Li-Ion Cathodes with and without Alumina Coatings , 2011 .

[33]  Martin Winter,et al.  Synthesis and electrochemical performance of the high voltage cathode material Li[Li0.2Mn0.56Ni0.16Co0.08]O2 with improved rate capability , 2011 .

[34]  Shinichi Komaba,et al.  Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo(1/3)Ni(1/3)Mn(1/3)O2. , 2011, Journal of the American Chemical Society.

[35]  Jianming Zheng,et al.  A comparison of preparation method on the electrochemical performance of cathode material Li[Li0.2Mn0.54Ni0.13Co0.13]O2 for lithium ion battery , 2011 .

[36]  M. Whittingham,et al.  Stability and Rate Capability of Al Substituted Lithium-Rich High-Manganese Content Oxide Materials for Li-Ion Batteries , 2011 .

[37]  Doron Aurbach,et al.  Synthesis of Integrated Cathode Materials xLi2MnO3⋅ ( 1 − x ) LiMn1 / 3Ni1 / 3Co1 / 3O2 ( x = 0.3 , 0.5 , 0.7 ) and Studies of Their Electrochemical Behavior , 2010 .

[38]  Fang Wang,et al.  Sonochemical synthesis of cobalt aluminate nanoparticles under various preparation parameters. , 2010, Ultrasonics sonochemistry.

[39]  A. Gedanken,et al.  The application of ultrasound radiation to the synthesis of nanocrystalline metal oxide in a non-aqueous solvent. , 2010, Ultrasonics sonochemistry.

[40]  John T. Vaughey,et al.  Li{sub2}MnO{sub3}-stabilized LiMO{sub2} (M=Mn, Ni, Co) electrodes for high energy lithium-ion batteries , 2007 .

[41]  John T. Vaughey,et al.  Comments on the structural complexity of lithium-rich Li1+xM1−xO2 electrodes (M = Mn, Ni, Co) for lithium batteries☆ , 2006 .

[42]  Michael Holzapfel,et al.  Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn0.6]O2. , 2006, Journal of the American Chemical Society.

[43]  John T. Vaughey,et al.  Advances in manganese-oxide ‘composite’ electrodes for lithium-ion batteries , 2005 .

[44]  A. Gedanken,et al.  Sonochemical synthesis and characterization of pure nanometer-sized Fe3O4 particles , 2000 .