Surface error modeling, evaluation and optimization of large optics in inertial confinement fusion laser system

Abstract Surface errors of mounted large optics have significant impacts on laser performance in high power laser system. However, in SG-III inertial confinement fusion (ICF) laser system, it is really tough to realize the minimized surface error and satisfy the design criterions. In this paper, the compositions and corresponding causes of complicated surface topographies are analyzed systematically. Surface decoupling, reconstruction and fitting methods are proposed successively and constitute an integrated surface modeling methodology to visualize and evaluate both offline and online mirror surfaces. Further, we present a closed-loop “mounting – inspection – optimization” assembly process based on the combination of interferometric measuring, finite element simulation and digital reconstruction, which will lead the mounting induced surface error of the large optics to meet the wavefront criterions. Through a case study of the large aperture laser transport mirror, the proposed approach is proved to have good performance on both improving optical mounting performance and obtaining accurate surface features.

[1]  D. W. Larson.  NIF laser line-replaceable units (LRUs) , 2004, SPIE LASE.

[2]  David J. Trummer,et al.  Stability of optical elements in the NIF target area building , 1998, Other Conferences.

[3]  Victor L. Genberg,et al.  Integrated Optomechanical Analysis , 2002 .

[4]  Mark A. Henesian,et al.  National Ignition Facility wavefront requirements and optical architecture , 2004 .

[5]  David M. Aikens.  Origin and evolution of the optics specifications for the National Ignition Facility , 1995, Optics & Photonics.

[6]  Yingchun Liang,et al.  Analysis of torque mounting configuration for nonlinear optics with large aperture , 2014 .

[7]  E. Ventsel,et al.  Thin Plates and Shells: Theory: Analysis, and Applications , 2001 .

[8]  Deng Ying,et al.  Development of laser technology in Research Center of Laser Fusion , 2013 .

[9]  J. Greivenkamp.  Field Guide to Geometrical Optics , 2004 .

[10]  Hui Wang,et al.  Optomechanical analysis of the mounting performance of large laser transport mirrors , 2015 .

[11]  Henry Wong,et al.  Optical assembly and alignment for the National Ignition Facility project , 1998, Photonics West.

[12]  W. Swantner,et al.  Gram-Schmidt orthonormalization of Zernike polynomials for general aperture shapes. , 1994, Applied optics.

[13]  Yongming Bian,et al.  Radial support analysis for large-aperture rotating wedge prism , 2012 .

[14]  Xiaodong Yuan,et al.  Surface error modeling of mounted large optics in high power laser system , 2016, Other Conferences.

[15]  David M. Aikens,et al.  Use of power spectral density (PSD) functions in specifying optics for the National Ignition Facility , 1995, Other Conferences.

[16]  Yongwei Guo,et al.  Method to minimize the gravity sag of a facing ground Φ1m flat mirror , 2006, International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT).

[17]  Liren Liu,et al.  Dynamic characteristics analysis of a large-aperture rotating prism with adjustable radial support. , 2014, Applied optics.

[18]  Xiaodong Yuan,et al.  Optomechanical analysis of the flexure mounting configuration of large-aperture laser transport mirror , 2017 .

[19]  Hedser H. van Brug.  Efficient Cartesian representation of Zernike polynomials in computer memory , 1997, Other Conferences.

[20]  David M. Aikens,et al.  Derivation of preliminary specifications for transmitted wavefront and surface roughness for large optics used in inertial confinement fusion , 1995, Other Conferences.

[21]  R. Edward English,et al.  Surface figure and roughness tolerances for NIF optics and the interpretation of the gradient, P-V wavefront, and RMS specifications , 1999, Optics + Photonics.

[22]  Victor L. Genberg,et al.  Orthogonality of Zernike polynomials , 2002, SPIE Optics + Photonics.

[23]  Guihua Li.  Assembly Accuracy Study of Large Optical Units in High Power Laser System , 2015 .

[24]  Angela Davies,et al.  Zernike polynomials for mid-spatial frequency representation on optical surfaces , 2016, Optical Engineering + Applications.

[25]  Genbao Zhang.  Typical Process Capability Analysis of Small-batch Production Based on Fuzzy Matter-element , 2015 .