Oxidation protection of copper surfaces using self-assembled monolayers of octadecanethiol

Self-assembled monolayers (SAMs) of alkanethiols adsorbed onto clean surfaces of face centred cubic (fcc) metals have been studied extensively for their ability to control the chemical functionality of the surface and as a means of preventing the oxidation and corrosion of the substrate metal. However, in many cases it has been found that on reactive substrates such as copper, it is difficult to prepare SAMs without the incorporation of some oxygen into the structure. In this work, self-assembled monolayers of octadecanethiol (ODT) were formed on copper foil substrates using a series of etching treatments to remove the native oxide layer prior to deposition of the ODT coating from a modified solution. X-ray photoelectron spectroscopy was used to analyse the SAMs and showed that monolayers with no detectable oxygen content could be produced. The effect of exposing the samples to air at different temperatures was monitored to examine the rate of the oxidation process, which was found to vary strongly with temperature. Samples stored at room temperature were found to oxidise relatively quickly, while those kept in a refrigerator were slower. Storing samples in a freezer dramatically reduced the oxidation of the copper, such that samples kept for 10 weeks still did not show any clear evidence of oxygen incorporation.

[1]  Reiko Haneda,et al.  Protection of Copper Corrosion by an Ultrathin Two‐Dimensional Polymer Film of Alkanethiol Monolayer , 1998 .

[2]  G. Whitesides,et al.  .omega.-Terminated alkanethiolate monolayers on surfaces of copper, silver, and gold have similar wettabilities , 1992 .

[3]  D. Hutt,et al.  Rates of attachment of fibroblasts to self-assembled monolayers formed by the adsorption of alkylthiols onto gold surfaces , 1997 .

[4]  David A. Hutt,et al.  INFLUENCE OF ADSORBATE ORDERING ON RATES OF UV PHOTOOXIDATION OF SELF-ASSEMBLED MONOLAYERS , 1996 .

[5]  S. Géribaldi,et al.  Mechanically polished copper surfaces modified with n-dodecanethiol and 3-perfluorooctyl-propanethiol , 2002 .

[6]  M. Tarlov,et al.  UV photopatterning of alkanethiolate monolayers self-assembled on gold and silver , 1993 .

[7]  K. Aramaki,et al.  Protective Films on Copper by Multistep Modification of an Alkanethiol Monolayer with Chlorosilanes and Alkanediol , 1998 .

[8]  M.T.W. de Langen.  Low Cost Flip Chip Technology , 1997 .

[9]  R. Crooks,et al.  Spectroscopic, voltammetric, and electrochemical scanning tunneling microscopic study of underpotentially deposited Cu corrosion and passivation with self-assembled organomercaptan monolayers , 1998 .

[10]  George M. Whitesides,et al.  Structure of monolayers formed by coadsorption of two n-alkanethiols of different chain lengths on gold and its relation to wetting , 1992 .

[11]  G. Whitesides,et al.  Formation of monolayer films by the spontaneous assembly of organic thiols from solution onto gold , 1989 .

[12]  George M. Whitesides,et al.  Patterning Self-Assembled Monolayers: Applications in Materials Science , 1994 .

[13]  Self-Assembled n-Alkanethiolate Monolayers on Underpotentially Deposited Adlayers of Silver and Copper on Gold , 1997 .

[14]  G. Whitesides,et al.  Comparisons of self-assembled monolayers on silver and gold: mixed monolayers derived from HS(CH2)21X and HS(CH2)10Y (X, Y = CH3, CH2OH) have similar properties , 1991 .

[15]  G. Whitesides,et al.  Use of a Patterned Self-Assembled Monolayer To Control the Formation of a Liquid Resist Pattern on a Gold Surface , 1995 .

[16]  C. Cabrera,et al.  Electrochemical and surface analysis study of copper corrosion protection by 1-propanethiol and propyltrimethoxysilane: A comparison with 3-mercaptopropyltrimethoxysilane , 2002 .

[17]  G. Leggett,et al.  Static Secondary Ion Mass Spectrometry Studies of Self-Assembled Monolayers: Influence of Adsorbate Chain Length and Terminal Functional Group on Rates of Photooxidation of Alkanethiols on Gold , 1998 .

[18]  A. Lazarescu,et al.  Self-assembled monolayers of n-hexanethiol and 6-[2',5'-di(2"-thienyl)pyrrol-1'-yl]hexanethiol on polycrystalline nickel substrates , 1998 .

[19]  George M. Whitesides,et al.  Formation of monolayers by the coadsorption of thiols on gold: variation in the head group, tail group, and solvent , 1989 .

[20]  G. Whitesides,et al.  Attenuation of photoelectrons in monolayers of n-alkanethiols adsorbed on copper, silver, and gold , 1991 .

[21]  A. J. Wagner,et al.  Effect of X-ray Irradiation on the Chemical and Physical Properties of a Semifluorinated Self-Assembled Monolayer , 2002 .

[22]  Ralph G. Nuzzo,et al.  Fundamental studies of microscopic wetting on organic surfaces. 1. Formation and structural characterization of a self-consistent series of polyfunctional organic monolayers , 1990 .

[23]  Barbara J. Garrison,et al.  Phase Transitions in a Methyl-Terminated Monolayer Self-Assembled on Au{111} , 1997 .

[24]  George M. Whitesides,et al.  Comparison of the Structures and Wetting Properties of Self-Assembled Monolayers of n- Alkanethiols on the Coinage Metal Surfaces, Cu, Ag, Au' , 1991 .

[25]  J. Hemminger,et al.  Photooxidation of thiols in self-assembled monolayers on gold , 1993 .

[26]  Zhiqiang Gao,et al.  Corrosion Protection of Copper by a Self‐Assembled Monolayer of Alkanethiol , 1997 .

[27]  H. Nishihara,et al.  Permeability of alkanethiol self-assembled monolayers adsorbed on copper electrodes to molecular oxygen dissolved in 0.5 M Na2So4 solution , 1996 .

[28]  G. Leggett,et al.  Influence of tail-group hydrogen bonding on the stabilities of self-assembled monolayers of alkylthiols on gold , 1999 .

[29]  G. Whitesides,et al.  Self-assembled monolayers of n-alkanethiolates on copper are Barrier films that protect the metal against oxidation by air , 1992 .

[30]  George M. Whitesides,et al.  Self-assembled monolayers of alkanethiols on gold: comparisons of monolayers containing mixtures of short- and long-chain constituents with methyl and hydroxymethyl terminal groups , 1992 .

[31]  G. Whitesides,et al.  Formation of Monolayers by the Coadsorption of Thiols on Gold: Variation in the Length of the Alkyl Chain , 1989 .

[32]  G. Kane Jennings,et al.  Effect of Chain Length on the Protection of Copper by n-Alkanethiols , 1998 .

[33]  R. Nuzzo,et al.  Studies of the temperature-dependent phase behavior of long chain n-alkyl thiol monolayers on gold , 1990 .

[34]  C. Lea,et al.  Quantitative Solderability Measurement of Electronic Components: Part 6: An Inter‐laboratory Comparison of Wetting Balance Measurements , 1991 .

[35]  O. Cavalleri,et al.  Electroless Deposition of Metal Nanoislands on Aminothiolate-Functionalized Au(111) Electrodes , 1998 .

[36]  Pan,et al.  Photoemission from supported metal clusters: The problem of the support. , 1987, Physical review. B, Condensed matter.

[37]  J. Delhalle,et al.  Elaboration of Self-Assembled Monolayers of n-Alkanethiols on Nickel Polycrystalline Substrates: Time, Concentration, and Solvent Effects , 2003 .

[38]  R. Behm,et al.  Corrosion of Alkanethiol-Covered Cu(100) Surfaces in Hydrochloric Acid Solution Studied by in-Situ Scanning Tunneling Microscopy , 1997 .

[39]  I. Rubinstein,et al.  SELF-ASSEMBLED MONOLAYERS ON OXIDIZED METALS. 4. SUPERIOR N-ALKANETHIOL MONOLAYERS ON COPPER , 1998 .

[40]  T. M. Putvinski,et al.  Surface structure and thermal motion of n‐alkane thiols self‐assembled on Au(111) studied by low energy helium diffraction , 1991 .

[41]  P. Fenter,et al.  Chain-length dependence of the structures and phases of CH3(CH2)n-1 SH self-assembled on Au(111). , 1993, Physical review letters.