IEEE Standard for Terminology and Test Methods for Analog-to-Digital Converters

The design process will be affected in several ways. Without careful attention, the ADC interfacing could produce substandard results. Additional devices such as terminators, attenuators, and delay lines may need to be added to match signal levels and to provide signal isolation. The standard will also help incorporate evaluation considerations and test methods into the design and implementation processes.

[1]  T. M. Souders,et al.  Step and frequency response testing of waveform recorders , 1990, 7th IEEE Conference on Instrumentation and Measurement Technology.

[2]  Jerome J. Blair.  Selecting test frequencies for sinewave tests of ADCs , 2005, IEEE Transactions on Instrumentation and Measurement.

[3]  A. Papoulis.  Probability and Statistics , 1989 .

[4]  F. Harris.  On the use of windows for harmonic analysis with the discrete Fourier transform , 1978, Proceedings of the IEEE.

[5]  Phil Carrier.  A Microprocessor Based Method for Testing Transition Noise in Analog to Digital Converters , 1983, ITC.

[6]  B. N. Suresh Babu,et al.  Dynamic converter characterization for radar , 1994 .

[7]  J. Schoukens,et al.  The interpolated fast Fourier transform: a comparative study , 1991 .

[8]  J. J. Blair,et al.  A method for characterizing waveform recorder errors using the power spectral distribution , 1992 .

[9]  Thomas E. Linnenbrink.  Effective Bits: Is That All There Is? , 1984, IEEE Transactions on Instrumentation and Measurement.

[10]  Robert M. Gray,et al.  Dithered quantizers , 1993, IEEE Trans. Inf. Theory.

[11]  Samuel D. Stearns,et al.  Signal processing algorithms , 1988 .

[12]  Francisco André Corrêa Alegria,et al.  Uncertainty of ADC random noise estimates obtained with the IEEE 1057 standard test , 2005, IEEE Transactions on Instrumentation and Measurement.

[13]  Tamás Dabóczi,et al.  Uncertainty of signal reconstruction in the case of jittery and noisy measurements , 1998, IEEE Trans. Instrum. Meas..

[14]  T. Michael Souders,et al.  Accurate frequency response determinations from discrete step response data , 1987, IEEE Transactions on Instrumentation and Measurement.

[15]  Alan V. Oppenheim,et al.  Discrete-Time Signal Pro-cessing , 1989 .

[16]  Solomon Max.  Testing high speed high accuracy analog to digital converters embedded in systems on a chip , 1999, International Test Conference 1999. Proceedings (IEEE Cat. No.99CH37034).

[17]  D. G. Watts,et al.  Spectral analysis and its applications , 1968 .

[18]  D. M. Hummels,et al.  The modulo time plot-a useful data aquisition diagnostic tool , 1996 .

[19]  F.H. Irons,et al.  The noise power ratio-theory and ADC testing , 1999, IMTC/99. Proceedings of the 16th IEEE Instrumentation and Measurement Technology Conference (Cat. No.99CH36309).

[20]  Dario Petri,et al.  A/D converter performance analysis by a frequency domain approach , 1992, [1992] Conference Record IEEE Instrumentation and Measurement Technology Conference.

[21]  Y.-C. Jenq.  High-precision sinusoidal frequency estimator based on weighted least square method , 1987, IEEE Transactions on Instrumentation and Measurement.

[22]  S. Max.  Optimum measurement of ADC code transitions using a feedback loop , 1999, IMTC/99. Proceedings of the 16th IEEE Instrumentation and Measurement Technology Conference (Cat. No.99CH36309).

[23]  G. Stewart.  Introduction to matrix computations , 1973 .

[24]  Solomon Max.  Fast accurate and complete ADC testing , 1989, Proceedings. 'Meeting the Tests of Time'., International Test Conference.

[25]  T. M. Souders,et al.  The effects of timing jitter in sampling systems , 1989 .

[26]  B. N. Suresh Babu,et al.  Testing an ADC linearized with pseudorandom dither , 1998, IEEE Trans. Instrum. Meas..

[27]  Donald M. Hummels,et al.  The noise power ratio-theory and ADC testing , 2000, IEEE Trans. Instrum. Meas..

[28]  T.-X. Cai,et al.  Determination of AC-DC difference in the 0.1-100 MHz frequency range , 1989 .

[29]  P. Daponte,et al.  ADC parameters and characteristics , 2005, IEEE Instrumentation & Measurement Magazine.

[30]  István Kollár,et al.  Four-parameter fitting of sine wave testing result: iteration and convergence , 2004, Comput. Stand. Interfaces.

[31]  G. Zeoli,et al.  Quantization and Saturation Noise Due to Analog-to-Digital Conversion , 1971, IEEE Transactions on Aerospace and Electronic Systems.

[32]  James A. Strickland.  Time-domain reflectometry measurements , 1970 .